Demo Discussion
Forum Config Examples Contributions Vulnerabilities
  Contributions to ELOG, Page 1 of 6  Not logged in ELOG logo
ID Date Author Author Emaildown Category Subject Status Last Revision
  21   Tue Feb 20 18:20:40 2007 Val Schmidtvschmidt@ldeo.columbia.eduDocumentationSecure elog with SSL under Apache2 on UbuntuStable 
The steps for configuration under Apache2 are a bit different. Below I've included a quick list of instructions for Ubuntu. One nice thing about this method, is that only https requests to https://your.url/elog are redirected (not all https connections to your url) so you can have other services running under ssl:

My Setup:
Ubuntu 6.10 (Edgy):
Linux tide1 2.6.17-11-generic #2 SMP Thu Feb 1 19:52:28 UTC 2007 i686 GNU/Linux

Packages:
ii  apache2                                    2.0.55-4ubuntu4                      next generation, scalable, extendable web se
ii  apache2-common                             2.0.55-4ubuntu4                      next generation, scalable, extendable web se
ii  apache2-mpm-worker                         2.0.55-4ubuntu4                      high speed threaded model for Apache2
ii  apache2-utils                              2.0.55-4ubuntu4                      utility programs for webservers 
ii  elog                                       2.6.1+r1642-1                        Logbook system to manage notes through a Web
---

To setup ssl in apache2 for elog I started here:
This min-howto was kindly provided in a forum. I reproduced it here without permission.
A Mini-Howto for apache2: 

apt-get install apache2
apache2-ssl-certificate
(and answer the questions)

Now, enable ssl:
a2enmod ssl

configure ssl:
cp /etc/apache2/sites-available/default /etc/apache2/sites-available/ssl
ln -s /etc/apache2/sites-available/ssl /etc/apache2/sites-enabled/ssl 
"/etc/apache2/sites-enabled/ssl" should look like this:

NameVirtualHost *:443
<VirtualHost *:443>
(... configure the directories too...)
and "/etc/apache2/sites-enabled/default" should look like this:

NameVirtualHost *:80
<VirtualHost *:80>
(... configure the directories too...)
In /etc/apache2/ports.conf, add Listen 443

In the middle of /etc/apache2/sites-available/ssl file, insert this two lines:

SSLEngine On
SSLCertificateFile /etc/apache2/ssl/apache.pem

Hope it helps :)

This method, without configuraiton of any of the <Directory> directives in /etc/apache2/sites-available/ssl, makes everything in /var/www https accessible. This may not be desirable. Configure the directives as you see fit.

To get SSL forwarding going for elog, in /etc/apache2/sites-available/ssl, I added the following:

 
ServerName tide1.unh.edu

        ProxyRequests Off
        ProxyPreserveHost On

        <Location /elog/>
                Order allow,deny
                allow from all

                ProxyPass  http://tide1.unh.edu:8080/
                ProxyPassReverse  http://tide1.unh.edu:8080/
                SSLRequireSSL
        </Location>

Once this is in place one must restart apache with
sudo /etc/init.d/apache2 force-reload

In /etc/elog.conf I added:
URL=https://tide1.unh.edu/elog

and restarted elog as above.

Finally, I removed the firewall entry that allowed connections to port 8080 for non-secure elog.

Items of note:
The "apache2-ssl-certificate" created a certificate that seems to expire in 30 days. This obviously not ideal. More details about how to create certificates can be found at HERE. At some point in the future, we'll have to figure this out and create a more appropriate certificate.
  46   Fri Jul 31 13:52:32 2015 TorstenJtorsten.jakob@jet-services.comWeb siteProblem with Internet Explorer when saving an entryStableFri May 31 14:20:43 2019 by Stefan Ritt

Hi all,

first off all let me say, that I realy like this great tool. That is a lot of help for keeping our server documentation up-to-date. Thanks to all contributors for that.

I right here, because I actually have an issue with saving entries working with IE11 (but also in IE9). When ever I enter an entry, and click the save button, the page open a page with the text: "OK 1"   or the second attemp: "OK 2"   3rd  "OK 3" and so on. To get back to my Item list, I have to click the back button in the internet explorer. I also opens a lot of draft entries in my databases.  When I submit my entry, I don't have an issue, and the entry is saved correctly.

This issue doesn't happen when using Google Chrome.

Had anyone an simlar issue using elog with IE?  It would be great to have some help with that issue.

Thanks

Torsten

  32   Fri Feb 19 14:05:53 2010 Tony Alberstony.albers@gmail.comOtherupdated eloglang.danish fileStable 

I have updated the file. Everything should be translated now.

/tony

 

#
# Danish translation by Miljan Dedic <mde@HVIDOVRE.DK>
# 04-06-2004
# Updated by Tony Albers <tony.albers@gmail.com>
# 19-02-2010
# A more recent version may be available at :
# http://savannah.psi.ch/websvn/listing.php?repname=elog&path=%2Ftrunk%2Fresources%2F
#

New = Ny
Edit = Ændr
Delete = Slet
Reply = Svar
Find = Find
Last day = Sidste Dag
Last 10 = Sidste 10
Config = Konfigurer
Change password = Ændre Password
Logout = Log Ud
Help = Hjælp
Back = Tilbage
Submit = Send
First = Første
Last = Sidste
Previous = Forrige
Next = Næste
Copy to = Kopier til
Move to = Flyt til
Save = Gem
Cancel = Annuller
Wrong password = Forkert kendeord
Please login = Log Ind
Username = Bruger Navn
Password = Kendeord
Old password = Gamle kendeord
New password = Nyt kendeord
ELOG password = ELOG kendeord
ELOG change password = Ændre ELOG kendeord
Please enter password to obtain write access = Skriv kendeord for at opnå skriveadgang
Please enter password to obtain administration access = Skriv kendeord for at opnå admin adgang
Several logbooks are defined on this host = Flere logbøger er defineret på denne host
Please select the one to connect to = Vælg hvilken du vil have adgang til
Change password for user = Ændr kendeord til bruger
Logged in as = Du er logget ind som
Entry date = Dato for indlæg
with = Med
This is the last entry = Dette er det sidste indlæg
This is the first entry = Dette er det første indlæg
Email sent to = Email sendt til
Email notification suppressed = Send ikke Email
please select = Vælg venligst
Suppress Email notification = Notificér ikke med Email
Attachment = Vedhæft
Reply to this = Svar på denne
In reply to = Som svar på
Fields marked with = Felter markeret med
are required = Er påkrævet
Please check that it exists and elogd has write access = Kontroller venligst om det eksisterer,og om elogd har skriveadgang
Error: Attribute <b>%s</b> not supplied = Fejl: Attribut <b>%s</b> ikke udfyldt
Please go back and enter the <b>%s</b> field = Gå tilbage og udfyld <b>%s</b> feltet
Please use your browser's back button to go back = Brug tilbage knappen på din browser
ELOG find = ELOG søg
Find = Find
Search = Søg
Reset Form = Nulstil Form
Summary only = Kun Beskrivelse
Show attachments = Vis vedhæftede filer
Printable output = Vis Print
Sort in reverse order = Sorter i omvendt rækkefølge
Start date = Start dato
End date = Slut dato
Year = År
Text = Tekst
Search all logbooks = Søg i alle log bøger
Last %d days = Sidste %d dage
Last %d entries = Sidste %d indlæg
No entries found = Ingen indlæg fundet
A new entry has been submitted on %s = Et nyt indlæg af %s
Logbook = Logbog
Yes = Ja
No = Nej
Error deleting message: status = Fejl ved sletning: Status
Error: Command "<b>%s</b>" not allowed = Fejl: kommando "<b>%s</b>" ikke tilladt
Cannot open file <b>%s</b> =kan ikke åbne filen  <b>%s</b>
Cannot write to <b>%s</b> = kan ikke skrive til <b>%s</b>
No SMTP host defined in [global] section of configuration file = Ingen SMTP host defineret i [global] sektionen af konfigurationsfilen 
Display threads = Vis tråde
Logbook is empty = Logbog er tom
Download = Hent
and all its replies = Og alle Svar
Message ID = Besked-ID
Not logged in = Ikke logget ind
Login = Login
Page %d of %d = Side %d af %d
all entries = alle indlæg
Login name = Brugernavn
Full name = Fulde navn
ELOG user config = ELOG bruger Konfig
ELOG new user = Ny ELOG bruger
Admin = admin
Select user = Vælg bruger
Remove user = Fjern bruger
New user = Ny bruger
Retype new password = Gentag det nye kendeord
New passwords do not match, please retype = kendeord passer ikke, prøv igen
Retype password = Gentag kendeord
exists already = Bruger eksisterer allerede
Register as new user = Opret som ny bruger
A new ELOG user has been registered on %s = En ny bruger er blevet registreret på %s
Email = Email
User "%s" registered on logbook "%s" = Bruger "%s" i Logbog "%s" registreret
User [%s] has been deleted = Bruger [%s] er blevet slettet
Hit following URL to activate that account = Tryk på følgende URL for at aktivere bruger konto
ELOG registration = ELOG Registrering
Your ELOG account has been activated on host = Din ELOG Konto er aktiveret
You can access it at = Du kan opnå adgang på
Are you sure to delete these messages? = Er du sikker på at du vil slette disse beskeder?
Select = Vælg
All entries = Alle indlæg
Day = Dag
Week = Uge
Month = Måned
Show last = Vis Sidste(n)
Goto page = Gå til
All = Alle
Display = Vis
entries per page = Indlæg per side
Toggle all = Vis alle
Selected entries = Vælg Indlæg
Collapse = Fold Sammen
Expand = Fold Ud
Full = Fuld
Summary = Beskrivelse
Threaded = Vis som Tråde
Filters = Filtrer
Mode = Modus
Options = Funktioner
Error: start date after end date = Fejl: Start Dato efter Slut Dato
and all their replies = Og alle deres svar
Upload = Overfør til server
Requested = Rekvirer
Registration request on logbook "%s" = Anmodning om registrering på logbog "%s"
A new ELOG user wants to register on "%s" = Ny Bruger Ønsker At Registrere på "%s" logbogen
Search text also in attributes = Søg også text i attributerne
Date = Dato
ID = ID
Forgot password? = Glemt kendeord?
Email address <i>"%s"</i> not registered = Email Adresse <i>"%s"</i> ikke registreret
ELOG password recovery = Gendan ELOG kendeord
No Email address registered with user name <i>"%s"</i> = Bruger "</i> har ikke registreret mail adresse
Error sending Email via <i>"%s"</i> = Fejl ved afsendelse af e mail via <i>"%s"</i>
A new password for user <i>"%s"</i> has been sent to %s = Et nyt kendeord til Bruger <i>"%s"</i> er sendt til  %s
Forgot = Glemt
User "%s" registered on host "%s" = Bruger "%s" på host "%s" registreret
Registration request on host "%s" = Andmodning om registrering på host "%s"
A new password has been created for you on host %s = Et nyt kendeord er genereret på %s
Enter your user name or email address = Skriv venligst Bruger navn eller e mail adresse
Password recovery for ELOG %s = Genskab kendeord for  ELOG %s
Host = Host
Your ELOG account has been activated = Din ELOG Konto er aktiveret
Maximum number of attachments reached = Max antal vedhæftninger nået
on = Til
Entry is currently edited by = Indlæg er ved at blive redigeret af
recipients = Modtagere
Suppress shell execution = Ignorer kommando shell
Update = Opdater
by = Af
Change %s = rediger %s
Add new option here = Tilføj ny Funktion
Expand all = Udvid Alle
Add %s = Tilføj %s
User name <i>"%s"</i> not registered = Bruger Navn  <i>"%s"<i> ikke registreret
Synchronization = Synkronisering
Error: Value <b>%s</b> not allowed for boolean attributes = Fejl: værdi <b>%s</b> ikke tilladt for bool'ske Attributer
Error: Attribute option <b>%s</b> not existing = Fejl: Attribut Funktion <b>%s</b> eksisterer ikke
Last submission = Sidste Indlæg
Synchronize = Synkroniser
No mirror server defined in configuration file = ingen mirror-Server defineret i konfigurations filen
user = Bruger
Maximum number of replies (%d) exceeded = Max antal svar (%d) overskredet
Entry can only be edited %1.2lg hours after creation = Indlæg kan kun redigeres %1.2lg timer efter oprettelse
Display full entries = Vis alt
No entry selected for deletion = Intet indlæg markeret til sletning
Cannot read entry from local logbook = Kan ikke læse fra lokal logbog
Cannot create socket = Kan ikke oprette socket
Cannot resolve host name "%s" = Host "%s" kan ikke opløses
Cannot connect to host %s, port %d = Kan ikke forbinde til %s, Port %d
Cannot receive "%s" = Kan ikke modtage "%s"
Received wrong entry id "%d" = Modtog forkert ID "%d"
Entry #%d is locked on remote server = Indlæg #%d er låst på remote server
Cannot save remote entry locally = Kan ikke gemme remote indlæg lokalt
local = lokal
remote = remote
Please delete %s or %s entry to resolve conflict = Slet venligst indlæg %s eller %s indlæg for at løse problem
Error sending local entry = Fejl ved afsending af lokalt indlæg
Local entry submitted = Lokalt indlæg indlagt
Error deleting remote entry = Fejl ved sleting af remote indlæg
New entry cannot be written to directory "%s" = Nyt indlæg kan ikke skrives til bibliotek  "%s"
Entry %s cannot be read from logbook "%s" = Indlæg %s kan ikke læses fra logbog "%s"
This entry has been deleted = Dette indlæg er slettet
Entries = Indlæg
Cannot connect to remote server "%s" = Kan ikke forbinde til remote server  "%s"
Remote server is not an ELOG server = Remote server er ikke en ELOG server
Incorrect remote ELOG server version %s = Forkert Version %s fra remote server
Error accessing remote logbook = Fejl ved adgang til remote server
Invalid HTTP header = Forkert HTTP header
No user name supplied to access remote logbook = Intet bruger navn angivet til remote logbog
Synchronizing logbook %s with server "%s" = Synkroniser %s med server "%s"
Configuration has been changed locally and remotely = Konfigurationen er ændret lokalt og remote
Please merge manually to resolve conflict = Sammensmelt manuelt for at løse konflikt
Logbook "%s" does not exist on remote server = Logbog "%s" eksisterer ikke på remote server
Entry has been changed locally and remotely = Indlæg er ændret lokalt og remote
Entry deleted locally = Indlæg slettet lokalt
Changed local entry ID to %d = lokalt indlæg ID til %d
Entry deleted remotely = Indlæg slettet remote
All entries identical = Alle indlæg identiske
Invalid mirror_id or entry_date = Ugyldigt mirror_id eller indlæg_dato
Synchronize all logbooks = Synkroniser alle logbøger
Calendar = Kalender
Remote entry received = Remote indlæg modtaget
Pick a date = Vælg dato
Please select at least one '%s' = Vælg mindst en '%s'
Please select a '%s' = Vælg en  '%s'
Please enter month for attribute '%s' = Vælg måned for attribut '%s'
Please enter day for attribute '%s' = Vælg dag for attribut '%s'
Please enter year for attribute '%s' = Vælg år for attribut '%s'
Please enter attribute '%s' = Vælg attribut '%s'
Entry time = Dato/Tid
Start = Start
End = Slut
From = Fra
After = Efter
to = Til
Before = før
Previous Year = Forrige år
Next Year = Næste år
Please enter numeric value for '%s' = Indsæt numerisk værdi for '%s'
Error: Attribute <b>%s</b> must be numeric = Felj: Attribut <b>%s</b> skal være en numerisk værdi
3 Months = 3 måneder
6 Months = 6 måneder
Error sending local message = Fejl ved adsendelse af lokalt besked
Error receiving message = Fejl ved modtagelse af besked
Are you sure to delete this entry? = Er du sikker på at du vil slette dette indlæg?
ELOG CSV import = ELOG CSV Import
Import = Import
CSV filename = CSV filnavn
Field separator = Felt Separator
Edit entry = Rediger Felt
Delete entry = Slet Felt
CSV Import = CSV Import
Derive attributes from CSV file = Hent attributer fra CSV fil
Comma = Komma
Semicolon = Semikolon
Preview import = Forhåndsvis Import
CSV import preview of %s = CSV import forhåndsvisning af %s
Too many attributes in CSV file = For mange attributter i CSV fil
%d entries successfully imported = %d indlæg successfuldt importeret
No 'Attributes' option present in %s = Ingen 'Attributter' funktioner tilstede i %s
CSV ("," separated) = CSV ("," separeret)
CSV (";" separated) = CSV (";" separaret)
Auto detect = Auto detektion
Resubmit as new entry = send som nyt indlæg
#
#---- please translate following items and then remove this comment ----#
#
text = tekst
Column header '%s' must be present in CSV file = Kolonneoverskrift '%s' skal være tilstede i CSV filen
Fill text body = Brødteks
Please re-enter filename = Genindtast venligst filnavnet
New = Ny
Last x = Sidste x
Activate = Aktiver
Entry has been modified = Indlægget er blevet modificeret
No attachment file specified = Der er ikke specificeret en fil til vedhæftning
Submit modified ELOG entry? = Publicer modificeret ELOG indlæg
Delete this logbook = Slet denne logbog
Rename this logbook = Omdøb denne logbog
Create new logbook = Opret ny logbog
Syntax error in config file = Indtastningsfejl i konfigurationsfilen
Email notification = Email notifikation
Are you sure to delete logbook "%s"? = Er du sikker på at du vil slette logbogen ''%s''?
Logbook "%s" exists already, please choose different name = Logbogen ''%s'' findes allerede, vælg venligst et andet navn
Rename logbook = Omdøb logbog
Enter new logbook name = Indtast nyt navn på logbog
Logbook name = Logbog navn
Use existing logbook as template = Brug eksisterende logbog som skabelon
none = ingen
URL is redirected to: = URL er henvist til
Remote config should be received = Fjernkonfiguration skulle blive modtaget
Local entry should be submitted = Lokalt indlæg bør afsendes
Remote entry should be received = Fjernindlæg bør modtages
Local entry = Lokalt indlæg
%s should be deleted = %s bør slettes
Entry should be deleted locally = Indlæg bør slettes lokalt
Local entry ID should be changed to %d = Lokalt indlægs ID bør ændres til %d
Remote entry = Fjernindlæg
Entry should be deleted remotely = Indlæg bør slettes på fjernlokation
Click here to delete this entry = Tryk her for at slette dette indlæg
Maximum number of attribute options exceeded = Maximalt tilladt antal atributmuligheder overskredet
Please increase MAX_N_LIST in elogd.c and recompile = Forøg venligst  MAX_N_LIST i elogd.c og kompiler igen
You can "steal" the lock by editing this entry = Du kan ''stjæle'' låsen ved at modoficere dette indlæg
Several logbooks groups are defined on this host = Der er adskillige logbogsgrupper defineret på dette system
Please select one to list the logbooks in that group = Vælg venligst en gruppe for at se dens logbøger
No logbook defined on this server = Der er ikke defineret en logbog på dette system
Goto ELOG home page = Gå til ELOG's hjemmeside
Please enter "%s" = Indtast venligst ''%s''
Change config file = Ændr konfigurationsfil
Click here to delete %d entries = Tryk her for at slette %d indlæg
Please check that it exists and elogd has write access and disk is not full = Kontroller venligst at elogd har skriveadgang og at der er ledig plads på harddisken
Show = Vis
Hide =  Skjul
Hide all = Skjul alle
Show all = Vis alle
This logbook requires authentication = Denne logbog behøver opmærksomhed
Attachment file <b>"%s"</b> empty or not found = Vedhæftet fil <b>''%s''</b> er tom eller kunne ikke findes
Case sensitive = Forskel på store og små bogstaver
List = Liste
Date must be between 1970 and 2037 = Dato skal være mellem 1970 og 2037
up = op
down = ned
stop = stands
Entry = Indlæg
name may not contain blanks = Der må ikke være mellemrum i navnet
regular expressions = regulære udtryk
Text fields are treated as %s = Teksfelter behandles som %s
Subscribe to logbooks = Abonnér på logbøger
enable automatic email notifications = aktiver emailnotifikationer
Set all = Sæt alle
Set none = Sæt ingen
Please enter hour for attribute '%s' = Indtast venligst timetal for attribut '%s'
Please enter minute for attribute '%s' = Indtast venligst minuttal for attribut '%s'
Please enter second for attribute '%s' = Indtast venligst sekundtal for attribut '%s'
No admin user has been defined in configuration file = Der er ikke defineret en administrator i konfigurationsfilen
Duplicate = Dupliker
Cannot lookup server name = Servernavn kan ikke slås op
Cannot connect to server = Der kan ikke forbindes til serveren
%s wrote = %s skrev
Quote = Citat
Insert current time = Indtast nuværende tidspunkt
Please enter numeric value for year of attribute '%s' = Indtast venligst numerisk værdi for årstal i attributten '%s'
Preview = Forhåndsvisning
FONT = FONT
SIZE = STØRRELSE
COLOR = FARVE
smiling = smiler
happy = lykkelig
winking = blinker
big grin = griner
crying = græder
cool = kølig
frowning = vrænger ansigt
confused = forvirret
mad = gal
pleased = glad
tongue = rækker tunge
yawn = gaber
Encoding = Formattering
User "%s" not found in password file = Brugeren ''%s'' blev ikke fundet i password filen
Cannot write to file <b>%s</b> = Kan ikke skrive til filen <b>%s</b>
Really remove user %s? = Er du sikker på at du vil slette brugeren %s?
Invalid user name "%s" or password for remote logbook = Ugyldigt brugernavn eller kodeord til fjernlogbog
Hide attachments = Skjul vedhæftninger
Show only new entries = Vis kun nye indlæg
Show all entries = Vis alle indlæg
New entries since = Nye indlæg siden
An old ELOG entry has been updated = Et gammelt ELOG indlæg er blevet opdateret
A new ELOG entry has been submitted = Et nyt ELOG indlæg er blevet publiceret
Cannot open file "%s" = Kan ikke åbne filen ''%s''
Invalid user name or password = Ugyldigt brugernavn eller kodeord
Upload image = Send billede
Please enter filename or URL = Indtast venligst filnavn eller URL
Maximum allowed file size is = Den størst tilladte filstørrelse er
Enter filename or URL = Indtast filnavn eller URL
Image uploaded successfully = Billedet er korrekt overført
Image "%s" uploaded successfully = Billedet ''%s'' er korrekt overført
HelpELCode = HjælpELKode
Cannot retrieve file from URL "%s" = Filen kan ikke hentes fra URL ''%s''
Enter name of hyperlink = Indtast hyperlink navn
Enter URL of hyperlink = Indtast hyperlink URL adresse
astonished = forbløffet
Error in regular expression "%s" = Fejl i regulært udtryk ''%s''
File not found at URL "%s" = Filen blev ikke fundet på URL ''%s''
Entry size too large for email notification = Indlæggets størrelse er for stort til email-notifikation
Please specify a valid email address = Specificer venligst en gyldig email adresse
Cannot send email notification to "%s" = Kan ikke sende email-notifikation til ''%s''
Error: Command "<b>%s</b>" is not allowed for user "<b>%s</b>" = Fejl: Kommando ''<b>%s</b>'' er ikke tilladt for bruger ''<b>%s</b>''
Shell execution not enabled via -x flag = Kommandofortolkerudførelse er ikke slået til med -x flaget
Enter heading level (1, 2 or 3) = Indtast overskiftsniveau (1, 2 eller 3)
User name may not contain blanks = Der må ikke være mellemrum i brugernavnet
Empty password not allowed = Tomme kodeord er ikke tilladt
Password may not contain blanks = Kodeord må ikke indeholde mellemrum
Anonymous = Anonym
Activation notice has been sent to %s = Notifiakation om aktivering er sendt til %s
Your request has been forwarded to the administrator = Din forespørgsel er sendt videre til en administrator
You will be notified by email upon activation of your new account = Du vil få besked i en email når din konto er aktiveret
Select period = Vælg periode
Last week = Sidste uge
Last month = Sidste måned
Last 3 Months = Sidste 3 måneder
Last 6 Months = Sidste 6 måneder
Last Year = Sidste år
Enter %s = Indtast %s
Select %s = Vælg %s
Bold text CTRL+B = Fed tekst CTRL+B
Italics text CTRL+I = Kursiv tekst CTRL+I
Underlined text CTRL+U = Understreget tekst CTRL+U
Centered text = Centreret tekst
Insert hyperlink = Indsat hyperlink
Insert email = Indtast email
Insert image CTRL+M = Indsæt billede CTRL+M
Insert quote = Indsæt citat
Insert list CTRL+L = Indsæt liste CTRL+L
Insert table = Indsæt tabel
Insert heading CTRL+H = Indsæt overskrift CTRL+H
Insert code CTRL+O = Indsæt kode CTRL+O
Hide the smiley bar = Skjul smileymenu
Show the smiley bar = Vis smileymenu
Insert current time/date = Indtast nuværende tidspunkt/dato
Entry is locked on local server and therefore skipped = Indlægget er låst på det lokal system og springes derfor over
Keep me logged in on this computer = Lad mig blive ved at være logget ind på denne maskine
for the next %d minutes = i de næste %d minutter
for the next hour = i den næste time
for the next %d hours = i de næste %d timer
for the next %d days = i de næste %d dage
keep original values = gem oprindelige værdier
Entry is locked = Indlæg er låst
Edit anyhow = Ret alligevel
Submit entry = Publicer indlæg
Insert image = Indsæt billede
Insert Date/Time = Indsæt dato/tid
Insert horizontal line = Indsæt horisontal linje
Insert anchor point = Indsæt ankerpunkt
keep original text = behold oprindelig tekst
unspecified = uspecificeret
To subscribe to any logbook, click on 'Config' in that logbook = For at abonnere på en logbog, vælg 'konfigurer' i denne logbog
ELOG XML import = ELOG XML import
Derive attributes from XML file = Afled attributter fra XML fil
XML filename = XML filnavn
Invalid date format = Ugyldigt datoformat
XML file does not contain %s element = XML filen indeholder ikke elementet %s
XML import preview of %s = XML import forhåndsvisning af %s
XML Import = XML Import
A old entry has been updated on %s = Et gammelt indlæg er blevet opdateret den %s
This entry has in meantime been locked by %s = Dette indlæg er i mellemtiden bleve låst af %s
This entry has in meantime been modified by someone else = Dette indlæg er i mellemtiden blevet modificeret af en anden bruger
First entry, Ctrl-Home = Første indlæg, Ctrl-Home
Previous entry, Ctrl-PgUp = Foregående indlæg, Ctrl-PgUp
Next entry, Ctrl-PgDn = Næste indlæg, Ctrl-PgDn
Last entry, Ctrl-End = Sidste indlæg, Ctrl-End
ELOG import = ELOG import
Please choose format to import: = Vælg det format der skal importeres
Enter text = Indtast tekst
Show HTML source code = Vis HTML kildekode
or until I log out = indtil jeg logger ud
Make smaller = Gør mindre
Original size = Oprindelig størrelse
Make larger = Gør større
Rotate left = Rotér til venstre
Rotate right = Rotér til højre
Delete attachment = Slet vedhæftning
Cannot create thumbnail, please check ImageMagick installation = Kan ikke danne oversigtsbilleder, kontroller at ImageMagick er korrekt installeret
Please log on by clicking on following link and change your password = Log venligst på ved at trykke på følgende link og ændr dit kodeord
Attachments = Vedhæftninger
Error: Content length (%d) larger than maximum content length (%d) = Fejl: Længde af indhold (%d) er større end maksimalt tilladt (%d)
ELOG error = ELOG fejl
Only user <b>%s</b> can edit this entry = Kun brugeren <b>%s</b> kan rette i dette indlæg
Export to = Eksporter til
Do not ignore first line = Ignorer ikke første linje
Last %d hours = Sidste %d timer
Invalid URL = Ugyldig URL
Attribute "%s" is not allowed in config file = Attributten ''%s'' er ikke tilladt i konfigurationsfilen
Only user <b>%s</b> can delete this entry = Kun bruger <b>%s</b> kan slette dette indlæg
File system full, ELOG cannot continue to work = Filsystemet er løbet fuld, ELOG kan ikke fortsætte
 

  3   Fri Jun 6 18:32:14 2003 Tomas Rudolftomas@mba.be ELOG Syntax highlighting in UltraEdit  
Maybe some of you use UltraEdit code editor (http://www.ultraedit.com/) to 
create/modify your ELOGD.CFG files.

Well, in that case we hope you find useful the attached syntax highlighting 
configuration file.

To intstall this file into UltraEdit :
MENU --> ADVANCED --> CONFIGURATION --> SYNTAX HIGHLIGHTING tab --> OPEN 
WORDLIST

You can also download the latest version from our website :
http://public.mba.be/demo/elog/u-edit-elog-syntax.txt
Attachment 1: u-edit-elog-syntax.txt
/L7"Elog" Line Comment = ; Block Comment On = /* Block Comment Off = */ String Chars = "' File Extensions = cfg
/Delimiters = ~!@%^&*()-+=|\/{}[]:;"'<> ,	.?
/C1"Elog Global functions"
** Logbook tabs
** SMTP host =
** Admin Password
** Admin user =
** Selection page
** Self register
** URL=
** Welcome Title
/C2"Elog Syntax"
** Attributes
** Back
** Bottom text
** Comment
** Config
** Copy to
** CSS
** Data dir
** Date format
** Delete
** Display Email recipients
** Display mode
** Download
** Edit
** edit
** Email
** Email All
** Email message body
** Email notification
** Entries per page
** Filtered browsing
** Find
** Find Menu commands
** Fixed Attributes Edit
** Fixed Attributes Reply
** full
** Group
** Guest find menu commands
** Guest menu commands
** Help
** Help URL
** IOptions
** Icon comment
** Language
** Last day
** Locked Attributes
** Logbook dir
** Logbook Tabs
** Logbook tabs
** Logfile
** Login
** Logout
** Main tab
** Menu commands
** Message Height
** Message Width
** MOptions
** Move to
** New
** Number Attachments
** on 
** Options
** Page Title
** Password file =
** port
** Preset
** Quick filter
** Remove on reply
** Reply
** Required Attributes
** Resource dir
** Restrict edit
** Reverse sort
** ROptions
** Search all logbooks
** Self register
** SMTP host
** Search all logbooks
** Subdir
** Submit Page
** Subst
** Subst on reply subject
** Suppress default
** Suppress Email on edit
** Suppress Email to users
** Tab cellpadding
** Theme
** Thread display
** Thread Icon
** threaded
** Use Email From
** Use Email Subject
/C3"Elog MBA reserved attributes"
** %a %d %m %y
** %%Action
** %%BookName
** %%MessageID
** %%User
AsTo 
Author
By
Categorie
Category
Contract
DateUp
DosL
DosR
Dossier
** Email AdressesEmail
** Email AsTo
** Email Partner
Email1
FollowUp
Forms
Inotifie
Inotifie
Notify
Notify
Origin
Partner
Priorite
Priority
Qualify
ShellLogFile
ShellOnSubmit0
ShellOnSubmit1
ShellParam0
ShellParam1
ShellParamVerboseType
Status
Type
  44   Tue Jul 8 15:43:21 2014 TimStimpie_s@yahoo.comScriptRe: Custom input forms implementationStableTue Mar 19 13:18:33 2013 by Stefan Ritt


Stefan Ritt wrote:

Dear ELOG users,

starting with SVN revision 2328, custom input forms are implemented. This allows application specific formats for check lists etc. In our specific case we had to implement a shift check list, which was quite long. Furthermore the check list should be optimized for an iPad, which we take in the field and record various checks and readings (in our case some gas pressure gauges at the PSI particle accelerator). Since the standard ELOG interface was too inflexible, a completely hand-written form was needed. The form can be activated by the new configuration options Custom New Form, Custom Edit Form and Custom Display Form, one for a new entry, an entry to edit and and entry to display. In our case we used the same form for all three cases. This is how the shift check list looks under the Safari Browser on a PC:

Capture.png 

And here is how it looks on the iPad:

IMAG0036.jpg

Each section can be collapsed and expanded (blue arrows at the left), and various internal checks are made before the check list can be submitted.

Implementing such forms is however more something for the advanced user, since you have to hand-write HTML with CSS and JavaScript code. It can then however be a powerful method for check lists. Please find in the attachments the elogd.cfg configuration for that logbook and the shiftcheck.html source code file. It is a bit complicated since the page is a static page, elogd just serves it from the file. This requires all the dynamic functions to be implemented inside the HTML file with JavaScript. To display an entry for example, the JavaScript loads the raw data with the "?cmd=Download" command and the populates the form fields. The collapsing and expanding is done by using CSS properties. The integrated style sheet was optimized for the rendering on an iPad. Rather large fonts were chosen so that the items can be checked easily with your finger tips. Various parameters are sent between the browser and the elogd program via hidden fields and cookies. So only something for experts! But if you go through the effort and hand-write the form, it can be very handy. Note that you have to upgrade to SVN revision 2328 for the three new options.

 

 

That's awesome!! Didn't know ELOG was still being developed!!  I was looking for this ...been trying this version now with
supplied example but there's files missing which are being referenced from the html file.

Anyway it would be nice to know a little more on how to use this and how it incorporates into ELOG.

Is some more work being done on this version ?

Thankx heaps for this great enhancement although now it's still needs a lot of figuring out on how to do this.
 

  37   Tue Aug 23 19:45:16 2011 Stuart Wilkinsswilkins@bnl.govScriptELOG Mail ParserAlpha 

 Hi!

I have attached a small script which can process an e-mail and submit this e-mail as a log entry. This is alpha at the moment but if you have suggestions or find bugs please let me know. 

The easiest way to process this is to use the ".forward" file in unix. If this file contains the line:

| "/usr/bin/python /home/tardis/elogmail/process.py --log /home/tardis/elogmail/mail.log -r -u http://localhost:8080/TARDIS -a Category=email -a Type=Log"

This will pipe the incoming mail to the e-log running on the localhost with the experiment TARDIS. Attributes can be set using the "-a" switch like in the elog command line utility. To get help with all the options please run the script with the command:

python process.py -h

which will give help.

Any questions, please don't hesitate to contact me, and I will do my best to help.

Thanks again to Stefan for a great application.

Best wishes,

Stuart

 

Attachment 1: process.py.gz
Attachment 2: forward.gz
  28   Fri Mar 28 10:23:50 2008 svrmartysvrmarty@gmx.netOtherELOG V2.7.3-2080 debian amd64 packageStableFri Mar 28 10:23:55 2008 by svrmarty
Attachment 1: elog_2.7.3+r2080-1_amd64.deb
  9   Wed Jul 7 18:19:10 2004 Steve Jonessteve.jones@freescale.comScriptGeneric Unix elogd init scriptStableWed Jul 7 18:19:38 2004 by Steve Jones
The elogd.init script that ships in the elog distribution is Linux centric.
 This script is written to work in a generic Unix environment under 'sh' -
no frills!
Attachment 1: elogd.init
#!/bin/sh

# description: Start elog
# elog can have multiple instances run on the same server, pointing to different logbook areas.  This start
# script should be run from the root of each different elog area.

ELOGD="/_TOOLS_/dist/gnu-elog-2.5.3/sparc-sun-solaris2.8/bin/elogd"
ELOGDIR="/proj/sysadmin/ess/www/elog"
HOSTNAME=`hostname`

# Check for the config file
if [ ! -f $ELOGDIR/elogd.cfg ]; then
    exit 0
fi


# See how we were called.
case "$1" in
  start)
        if [ -f $ELOGDIR/elogd-$HOSTNAME.pid ] ; then
	   pid=`cat ./elogd-$HOSTNAME.pid`
	   if [ -d /proc/$pid ] ; then
	     echo "elogd already running"
	     exit 1
	   fi
	fi
####################################
# The full path *must* be specified
	echo "Starting elogd: "
	$ELOGD -f $ELOGDIR/elogd-$HOSTNAME.pid -c $ELOGDIR/elogd.cfg -D  > /dev/null 2>&1 &
	RETVAL=$?
        if [ $RETVAL -eq 0  ] ; then 
          echo "elog started" 
        else
          echo "Failed to start elog"
        fi
	echo
	;;
  stop)
     echo ""
      if [ -f $ELOGDIR/elogd-$HOSTNAME.pid ] ; then
        echo "Stopping elogd: "
        kill `cat $ELOGDIR/elogd-$HOSTNAME.pid`
	rm -f $ELOGDIR/elogd-$HOSTNAME.pid
        echo "elog stopped"
        echo
     else
        echo "No elogd running?"
	echo "Failed to start elog"
	echo
     fi
     
	;;
  restart|reload)
	$0 stop
	$0 start
	;;
  *)
	echo "Usage: $0 {start|stop|restart}"
	exit 1
esac

exit 0

  23   Fri Jul 13 12:36:45 2007 Stefan Rittstefan.ritt@psi.chOtherRe: Compiling elogd.c on HP-UX 64 bitBetaThu Jul 12 09:38:47 2007 by Peter Rienstra
I applied most of your patches to the elog source code, SVN revision 1885. The only missing piece has to do with seteuid/setuid. I definitively need seteuid for linux, because elogd might be started under root, then it falls back to an optional elog user. But when it stops, it has to restore the original root user in order to delete the PID file (/var/run/elogd.pid) which was created under root. If seteuid does not exist under HP-UX, you should add something like
#ifdef HP-UX
  setuid(...)
#else
  seteuid(...)
#endif

Probably the HP-UX has to be something else, but I cannot test this since I don't have such an OS here. Once you get this working I can put it into the standard distribution.
  25   Mon Jul 16 15:57:47 2007 Stefan Rittstefan.ritt@psi.chOtherRe: Compiling elogd.c on HP-UX 64 bitBetaThu Jul 12 09:38:47 2007 by Peter Rienstra

Peter Rienstra wrote:
HP-UX doesn't have the "seteuid" and "setegid" functions. But there are "setuid+setgid", "setreuid+setregid" and "setresuid+setresgid" functions available.


I had a look and found that setreuid/setregid is also available under Linux, so I use those functions instead, which should also work on HP-UX. Can you check revision 1888 (http://savannah.psi.ch/viewcvs/trunk/src/elogd.c?root=elog&rev=1888), compile it and see if you can run it at least under your non-root account.
Goto page 1, 2, 3, 4, 5, 6   Next  All
ELOG V3.1.5-fe60aaf