DRS4 Forum
  DRS4 Discussion Forum, Page 13 of 45  Not logged in ELOG logo
ID Date Author Subject Text Attachments
  661   Tue Feb 27 18:04:18 2018 Steven BlockDRS4 Dead timesThat is extremely helpful! Many thanks.
One more question; If I were to take inputs
from 2 channels at once, would that scale
  
  660   Tue Feb 27 17:04:12 2018 Stefan RittDRS4 Dead timesXML is very slow to write, and you are
probably limited by that. Switch to binary
mode, which is much faster. You will see
  
  659   Tue Feb 27 16:34:26 2018 Steven BlockDRS4 Dead timesHello All,

I am currently trying to figure
out how to properly characterize the dead
 6x 
  658   Tue Feb 27 13:29:47 2018 Stefan RittWIndows Connection problem with drs507 SOLVEDDear Steven, many thanks for this information,
this is very useful. I know of people having
problems on Windows 10, maybe this will also
  
  657   Tue Feb 27 13:17:00 2018 Steven BlockWIndows Connection problem with drs507 SOLVEDHello All,

I too have been struggling with
trying to get the drs4 (507) to work on my
  
  656   Thu Jan 25 08:07:32 2018 chen wenjunproblem with the drscl(drs507)I have tried about 4 computers,only one
worked fine.I truly want to know how others
get this fixed,can you get in touch with
  
  655   Thu Jan 25 08:00:16 2018 Stefan Rittproblem with the drscl(drs507)This problem has been reported by several
people, like elog:551

So far I could not solve it. On
  
  654   Thu Jan 25 06:10:52 2018 chen wenjundrscl doesn't find eval board but drsosc does (Windows 7)Hi! Jim:

  It seems that I meet the
same question with you ,and I am confused
  
  653   Thu Jan 25 05:24:05 2018 chen wenjunproblem with the drscl(drs507)Hi! Stefan:

  when I change a new computer(win7,64bit),I
meet a problem that the drscl app cannot
  
  652   Wed Jan 17 10:09:09 2018 Stefan RittThe input signals recorded are different with the signal showed in oscilloscope First thing is to do another voltage calibration.
Disconnect input, "Config", "Execute
Voltage Calibration". If this does not
  
  651   Wed Jan 17 09:51:16 2018 Tran Cong ThienThe input signals recorded are different with the signal showed in oscilloscope Dear Stefan,

I am using an DRS4 board to record
the signals from an plastic scintillator
  
  650   Wed Dec 20 22:14:35 2017 Stefan Rittcascading -- DRS4 Osci.cpp & DRS.cpphttps://bitbucket.org/ritt/drs4eb

 
  
  649   Wed Dec 20 16:30:45 2017 Yoni Shercascading -- DRS4 Osci.cpp & DRS.cppHi, 

The board is modified (and checks
out with the DRSScope program). Could you
  
  648   Wed Dec 20 16:21:42 2017 Stefan Rittcascading -- DRS4 Osci.cpp & DRS.cppFirst you need a board which is modified
in hardware to support channel cascading.
Basically there are internal resistors which
  
  647   Wed Dec 20 15:30:38 2017 Yoni Shercascading -- DRS4 Osci.cpp & DRS.cppHi, 

I'm trying to do the same thing
(get 1 channel with 8192 bins), but I'm
  
  646   Tue Dec 12 13:58:06 2017 Stefan RittExternal trigger using Raspberry PiIndeed the code does not work for the current
evaluation board, it has been written for
a previous version and never been updated.
  
  645   Tue Dec 12 00:25:50 2017 Diego YankelevichExternal trigger using Raspberry PiDear Steffan:


We have been able to use the
DRS4 using a Raspberry Pi but we have not
  
  644   Wed Nov 22 14:52:31 2017 Stefan RittAveraging capabilities This feature is not yet implemented. The
(disabled) software swtich is more like a
kind of a reminder to myself to work on that
  
  643   Wed Nov 22 09:19:11 2017 chen wenjun using of the DRS Command Line InterfaceThank you very much !! All my fault for
I thought it too comlicated. Thank you sincerely!

  
  642   Wed Nov 22 09:14:18 2017 Stefan Rittusing of the DRS Command Line InterfaceRemove the check mark from the "Lock"
box and enter a different value in the sampling
speed box and hit return.
  
ELOG V3.1.5-fe60aaf