DRS4 Forum
  DRS4 Discussion Forum, Page 38 of 45  Not logged in ELOG logo
    Reply  Fri Jun 5 13:15:35 2015, Felix Bachmair, DRS4 firmware UCF constraints  
Hi Stefan,
No we only use one evaluation board. We use the evaluation board as a part of our beam test setup. It includes a telescope based on the current PSI46V2.1
CMS Pixel chip and a trigger logic board for triggering the telescope and the evaluation board. This includes a 
    Reply  Thu Jul 2 08:53:17 2015, Felix Bachmair, Issue with Trigger rates below ~100Hz 
Hi,

We did a further investigation of this problem:

We figured out that this issue seems to be related to the kernel.
Entry  Thu Jul 2 13:20:51 2015, Felix Bachmair, Creation of Object files 
HI,

We are using the DRS4 Board in the EUDAQ framework [1]. We wrote a a Producer based on the software of the evaluation board, which is using the
DRS class/header/src files.
    Reply  Mon Jul 6 11:30:56 2015, Felix Bachmair, Creation of Object files 
Hi Stefan,

That's fine for me. I thought it might be interesting for others as well..

Cheers
    Reply  Tue Jul 7 09:29:21 2015, Felix Bachmair, Creation of Object files Makefile
Yes of course no problem.

You can download via github https://github.com/veloxid/DRS4-v5-shared and I
also put it in the attachment.
    Reply  Fri Aug 7 20:32:15 2015, Felix Bachmair, DRS4 
Hi

Did you copy the udev rule 41-drs.rules into /etc/udev/rules.d/ ?

Which operating system are you using?
Entry  Sat Apr 2 11:21:10 2016, Felix Bachmair, Question about timimng calibration 
Hi,

I am trying to understand some details about the timing calibration.

We wrote our own code but we more or less use the ideas of the Oscilloscope class.
Entry  Thu Dec 13 12:03:29 2012, Evgeni, DRS-4 trigger 
How to configure DRS oscilloscope for the oscillations with an amplitude greater than the value of the exposed
in the trigger (internal). 
    Reply  Thu Dec 13 19:49:47 2012, Evgeni, DRS-4 trigger 
 

    
        
            Stefan Ritt wrote:
        
        
            
    Reply  Fri Dec 14 10:07:14 2012, Evgeni, DRS-4 trigger 
 

    
        
            Evgeni wrote:
        
        
            
    Reply  Fri Dec 14 10:07:54 2012, Evgeni, DRS-4 trigger 
 

    
        
            Stefan Ritt wrote:
        
        
            
Entry  Mon May 22 18:27:56 2017, Esperienza Giove, Invalid magic number 0000 
Hello everybody!

After some times i init my board, or if i stop the program during the acquisition, i get the error message "Invalid magic 0000". The
only way i can solve this problem is to physically disconnect and plug in again the USB cable.
    Reply  Thu May 25 20:17:41 2017, Esperienza Giove, Invalid magic number 0000 
Hello, thanks for your answer. Unluckily if i try to reset in this way it keeps hanging


musb_write: requested 10, wrote 0, errno -7 (Unknown error 18446744073709551609)
musb_read error 0
    Reply  Thu May 25 20:20:57 2017, Esperienza Giove, Invalid magic number 0000 
Hello, thanks for your answer. Unluckily if i try to reset in this way it keeps hanging


musb_write: requested 10, wrote 0, errno -7 (Unknown error 18446744073709551609)
musb_read error 0
Entry  Tue May 30 20:45:30 2017, Esperienza Giove, Setting input range 
Hello,

is it possible to set a completely negative input range like -1 to 0 or -0.95 to 0.05 ?
    Reply  Tue May 30 21:22:10 2017, Esperienza Giove, Setting input range 
Thank you




Stefan
Ritt wrote:



See elog:531
Entry  Thu Jul 6 15:10:48 2017, Esperienza Giove, Trigger setting (AND AND) OR (AND AND) 
Hello there,

is it possible to setup trigger in double AND configuration (a pair in and or other pair in and). 

eg (CH 1 AND CH 2 ) OR ( CH 3 AND CH4)
Entry  Tue May 21 12:39:00 2013, Enrico Conti, mac osx 10.6 
Hi,

I would like to use the DRS4 with my macbook pro running osx 10.6.8.
    Reply  Tue May 21 17:45:05 2013, Enrico Conti, mac osx 10.6 

> Can it be that you have a old PowerPC MAC? I have no experience with that, but probably you have to adjust the Makefile
> ans set some flags correctly for PPC instead of Intel.
    Reply  Tue May 21 17:48:45 2013, Enrico Conti, mac osx 10.6 

> it looks like 64bit vs 32bit problem, you have to compile all libraries for the same architecture. Maybe, make clean to 
> remove all precompiled object files .o and recompile it again. Try to compile first that simple example without wxWidgets.
ELOG V3.1.5-fe60aaf