DRS4 Forum
  DRS4 Discussion Forum, Page 40 of 45  Not logged in ELOG logo
New entries since:Thu Jan 1 01:00:00 1970
Entry  Tue May 21 12:39:00 2013, Enrico Conti, mac osx 10.6 
Hi,

I would like to use the DRS4 with my macbook pro running osx 10.6.8.
    Reply  Tue May 21 13:25:41 2013, Stefan Ritt, mac osx 10.6 
> Hi,

> I would like to use the DRS4 with my macbook pro running osx 10.6.8.
    Reply  Tue May 21 13:32:13 2013, Martin Petriska, mac osx 10.6 
> Hi,

> I would like to use the DRS4 with my macbook pro running osx 10.6.8.
    Reply  Tue May 21 17:45:05 2013, Enrico Conti, mac osx 10.6 

> Can it be that you have a old PowerPC MAC? I have no experience with that, but probably you have to adjust the Makefile
> ans set some flags correctly for PPC instead of Intel.
    Reply  Tue May 21 17:48:45 2013, Enrico Conti, mac osx 10.6 

> it looks like 64bit vs 32bit problem, you have to compile all libraries for the same architecture. Maybe, make clean to 
> remove all precompiled object files .o and recompile it again. Try to compile first that simple example without wxWidgets.
    Reply  Tue May 21 17:51:09 2013, Stefan Ritt, mac osx 10.6 
> > 
> > it looks like 64bit vs 32bit problem, you have to compile all libraries for the same architecture. Maybe, make clean to 
> > remove all precompiled object files .o and recompile it again. Try to compile first that simple example without wxWidgets.
    Reply  Tue May 21 18:30:11 2013, Enrico Conti, mac osx 10.6 
> > > 
> > > it looks like 64bit vs 32bit problem, you have to compile all libraries for the same architecture. Maybe, make clean to 
> > > remove all precompiled object files .o and recompile it again. Try to compile first that simple example without wxWidgets.
    Reply  Fri May 24 17:58:07 2013, Enrico Conti, mac osx 10.6 
> > > 
> > > it looks like 64bit vs 32bit problem, you have to compile all libraries for the same architecture. Maybe, make clean to 
> > > remove all precompiled object files .o and recompile it again. Try to compile first that simple example without wxWidgets.
    Reply  Fri May 24 18:20:14 2013, Stefan Ritt, mac osx 10.6 
> I made some progress. Understood what was wrong in the make phase. You have only to add the option -arch i386 in the CFLAGS line of the makefile.
> Then the make is ok, it produces the 3 executables. drs_exam and drscl seem to work correctly. 
> DRSOsc.app does not work as app, in the sense that if you click it, an error message comes saying "You can't use this version of the application DRSOsc.app
    Reply  Sat May 25 12:45:46 2013, Enrico Conti, mac osx 10.6 
> > I made some progress. Understood what was wrong in the make phase. You have only to add the option -arch i386 in the CFLAGS line of the makefile.
> > Then the make is ok, it produces the 3 executables. drs_exam and drscl seem to work correctly. 
> > DRSOsc.app does not work as app, in the sense that if you click it, an error message comes saying "You can't use this version of the application DRSOsc.app
Entry  Tue Dec 10 14:48:42 2013, ismail okan atakisi, measurement range 
I m trying to measure lifetime in our lab and I intend to take 
measurement with DRS4 at that point I have a little bit confused  about 
DRS4 time range.In My system I opened 10 us gate but after triggering 
    Reply  Tue Dec 10 14:54:46 2013, Stefan Ritt, measurement range 


    
        
            ismail okan atakisi wrote:
        
        
            
            I m trying to measure lifetime in our lab and I intend to take 
Entry  Wed Feb 20 08:03:04 2019, Lev Pavlov, meg? 
Hey. Strange problem. Why does the compiler refer there at all? Library installed drsosc works

 

LINK : fatal error LNK1104: cannot open file "C:\meg\online\drivers\drs\libusb-1.0\libusb-1.0.lib"
    Reply  Wed Feb 20 08:08:42 2019, Stefan Ritt, meg? 
You have to change the path to libusb-1.0.lib to the one where you installed it.

Stefan




Lev
    Reply  Wed Feb 20 12:13:44 2019, Lev Pavlov, meg? 
Great, drs_exam compiles without problems. Now when you run the compiled file drs_exam writes board not found, but drsosc and drscl work without problems.
What could possibly be the matter?

thanks for your patience
    Reply  Wed Feb 20 12:56:56 2019, Stefan Ritt, meg? 
No idea. Maye some access problem. Have you tried to start your program under an admin account?

Stefan




Lev
Entry  Fri Apr 12 09:39:30 2019, Lev Pavlov, multi-board 


Good afternoon, I use 5 boards in multi-mode, everything is connected according to the instructions. Can I measure the phase difference between
the two signals on channel 1 and channel 20? with each board the phase shift is added +16 ns I can not figure out how to compensate for this. give thanks
    Reply  Fri Apr 12 09:55:50 2019, Stefan Ritt, multi-board 
Subtract 16 ns from your measured value ;-)

Stefan




Lev
    Reply  Fri Apr 12 09:59:15 2019, Lev Pavlov, multi-board 
 

I understand this, thanks. But my Chief does not understand this, he wants to see the phase difference without “crutches”. And what
is meant in the manual 50 ps resolution? Maybe I just do not understand something? And if you submit a reference signal not in the mode of a garland, but
    Reply  Fri Apr 12 12:50:18 2019, Stefan Ritt, multi-board 
If you have two signal going through two cables, the cable have never the same length (on a scale of picoseconds), and you have to calibrate that anyway.
So a proper timing calibration is not a crutch.

What do you mean by "manual 50ps"? The manual does not mention any resolution. In my experience, you can achieve about 10ps between
ELOG V3.1.5-fe60aaf