Re: Announcement of RSS feeds, posted by Stefan Ritt on Mon Nov 15 12:51:44 2004
, posted by on Mon Nov 15 12:51:44 2004
Re: Announcement of RSS feeds, posted by Marc Neiger on Mon Nov 15 09:54:45 2004
, posted by on Mon Nov 15 09:54:45 2004
Re: Announcement of RSS feeds, posted by Stefan Ritt on Mon Nov 15 09:38:39 2004
Re: Announcement of RSS feeds, posted by Steve Allen on Mon Nov 15 01:02:29 2004
Re: Announcement of RSS feeds, posted by Marc Neiger on Thu Nov 11 01:04:01 2004
Re: $message id gives wrong value - Gernman traslalation of Back, posted by Ulrich Trüssel on Sun Nov 7 09:49:13 2004
Re: $message id gives wrong value - Gernman traslalation of Back, posted by Stefan Ritt on Sat Nov 6 11:29:52 2004
Re: $message id gives wrong value - Gernman traslalation of Back, posted by Ulrich Trüssel on Fri Nov 5 21:37:56 2004
Re: $message id gives wrong value - Gernman traslalation of Back, posted by Stefan Ritt on Fri Nov 5 17:45:47 2004
$message id gives wrong value - Gernman traslalation of Back, posted by Ulrich Trüssel on Fri Nov 5 16:59:30 2004
Re: Can the elog client submit an entry with a html body?, posted by Kristinn B. Gylfason on Tue Nov 2 18:15:09 2004
Re: Can the elog client submit an entry with a html body?, posted by Stefan Ritt on Tue Nov 2 17:47:43 2004
Can the elog client submit an entry with a html body?, posted by Kristinn B. Gylfason on Tue Nov 2 02:51:09 2004
|
Re: Announcement of RSS feeds, posted by Stefan Ritt on Mon Nov 15 12:51:44 2004
The problems came from the French accents and the German umlauts. I changed the XML
charset, so this should be fine now. New version is under CVS.
Remonter
|
|
, posted by on Mon Nov 15 12:51:44 2004
The
Remonter
|
|
Re: Announcement of RSS feeds, posted by Marc Neiger on Mon Nov 15 09:54:45 2004
IE 6 chokes on the XML, below is what I get for
http://midas.psi.ch/elogs/Forum/elog.rdf
(sorry this is in french).
So I assume all rss reader parsing the file with the MS XML parser shall also
have a problem, this is the case with Avant Browser integrated RSS reader.
Cheer,
Marc
------------------------------------------------------
La page XML ne peut pas être affichée
Impossible d'afficher l'entrée XML en utilisant la feuille de style XSL.
Corrigez l'erreur, puis cliquez sur le bouton Actualiser ou réessayez
ultérieurement.
--------------------------------------------------------------------------------
Un caractère incorrect a été trouvé dans un contenu de texte. Erreur de
traitement de la ressource http://midas.psi.ch/elog...
Re: $message id gives wrong value - Gernman traslalation of Back, posted
by Ulrich Tr
Remonter
|
|
, posted by on Mon Nov 15 09:54:45 2004
IE 6 chokes on the XML, below is what I get for
http://midas.psi.ch/elogs/Forum/elog.rdf
(sorry this is in french).
So I assume all rss reader parsing the file with the MS XML parser shall also
have a problem, this is the case with Avant Browser integrated RSS reader.
Cheer,
Marc
------------------------------------------------------
La page XML ne peut pas être affichée
Impossible d'afficher l'entrée XML en utilisant la feuille de style XSL.
Corrigez l'erreur, puis cliquez sur le bouton Actualiser ou réessayez
ultérieurement.
--------------------------------------------------------------------------------
Un caractère incorrect a été trouvé dans un contenu de texte. Erreur de
traitement de la ressource http://midas.psi.ch/elog...
Re: $message id gives wrong value - Gernman traslalation of Back, posted
by Ulrich Tr
Remonter
|
|
Re: Announcement of RSS feeds, posted by Stefan Ritt on Mon Nov 15 09:38:39 2004
> I didn't see the RSS button in Firefox, however the URL:
>
> http://midas.psi.ch/elogs/Forum/elog.rdf
> works fine in with Bloglines (http://www.bloglines.com/myblogs
You need Firefox 1.0 Preview or later.
> I've installed the lastest elog (v2.5.5)--how do I turn it on for a particular
> logbook?
It's on by default for all logbooks.
Remonter
|
|
Re: Announcement of RSS feeds, posted by Steve Allen on Mon Nov 15 01:02:29 2004
I didn't see the RSS button in Firefox, however the URL:
http://midas.psi.ch/elogs/Forum/elog.rdf
works fine in with Bloglines (http://www.bloglines.com/myblogs
I've installed the lastest elog (v2.5.5)--how do I turn it on for a particular
logbook?
Thanks,
Steve
> I implemented experimentally RSS feeds into Elog. Before releasing this new
> addition, I would like to collect some experience with it. This forum now
> supports RSS feeds, for which you can subscribe with a RSS feed reader like
> Mozilla Firefox. Please give it a try and send me any feedback.
>
> For an introduction to RSS feeds, please see
>
> http://www.webreference.com/authoring/languages/xml/rss/intro/
>
> To subscribe to a logbook, enter following URL into your RSS reader:
>
> http:////elog.rdf
>
> From the newest Mozilla Firefox browser, you can also click on the RSS box at
> the lower right corner of the browser (see attachment).
Remonter
|
|
Re: Announcement of RSS feeds, posted by Marc Neiger on Thu Nov 11 01:04:01 2004
Great, but what's the corresponding URL for the RSS feed itself
> I implemented experimentally RSS feeds into Elog. Before releasing this new
> addition, I would like to collect some experience with it. This forum now
> supports RSS feeds, for which you can subscribe with a RSS feed reader like
> Mozilla Firefox. Please give it a try and send me any feedback.
>
> For an introduction to RSS feeds, please see
>
> http://www.webreference.com/authoring/languages/xml/rss/intro/
Remonter
|
|
Re: $message id gives wrong value - Gernman traslalation of Back, posted by Ulrich Trüssel on Sun Nov 7 09:49:13 2004
installed elog 2.5.5 agin, same effekt with "back" / "zurück". checked the
language file eloglang.german witch seem ok for me and the translations are
well done. removed then in eloglang.germen the traslation for back and checked
this: still back was viewed. reinserted the translation "Zurück" (just this
word!)and checked again: everithing looks fine, no longer back, correctly
Zurück on the button.
absolutly no idea why and whats the difference was! bus it works...
thank's stefan! :-)
> > 2. the "back" link is clear and tranlated to "Liste". But I mean the back
> > button
> > in the entry and the edit mode (see picture)... ;-)
>
> Well, if you try with the demo logbook, the "Back" button is translated
> correctly, so I don't know whats wong in your case. Can you check that your
> eloglang.german file is intact?
Remonter
|
|
Re: $message id gives wrong value - Gernman traslalation of Back, posted by Stefan Ritt on Sat Nov 6 11:29:52 2004
> 2. the "bacl" link is clear and tranlated to "Liste". But I mean the back
> button
> in the entry and the edit mode (see picture)... ;-)
Well, if you try with the demo logbook, the "Back" button is translated
correctly, so I don't know whats wong in your case. Can you check that your
eloglang.german file is intact?
Remonter
|
|
Re: $message id gives wrong value - Gernman traslalation of Back, posted by Ulrich Trüssel on Fri Nov 5 21:37:56 2004
1. thats now clear with the £message id and the work-around is ok for my
needs
2. the "bacl" link is clear and tranlated to "Liste". But I mean the back
button
in the entry and the edit mode (see picture)... ;-)
> > the "$message id" will not be replaced by the msg id, the
string "$message
> > id" will be dispalyed and used. Other substitutions as $logbook etc.
are
> > working.
> >
> > Is this a bug or did i missunderstood the manual?
>
> Well, the manual does not state that "$message id" should work for "Subst
> " option (;-)
>
> The reason is that the message ID is available only *after* a new entry
has been
> written to the database, and the "Subst" command is evaluated *before*
an entry
> is submitted. "$message id" only works for "Thread display", "RSS
Title", "Subst
> on reply", "Subst on edit" and "Display". You should use
>
> Display KlientIn/KundIn = $Vorname $Name; P: $Telefon Privat; G: $Telefon
> Geschaft; N: $Telefon Mobil; $Landeskennung-$PLZ $Ortschaft [ href="http://localhost:8080/$logbook/$message id">$logbook:$message
id]
>
> Please note that you wrote "mesage id", correct is however "message id"
(two
> "s"), so there is also a typo.
>
> > Since Version 2.5.5: If ELOG is running under German, the "Zurück"
Bottom is
> > named "Back". Any Idee where I can change this back? ;-)
>
> The link "Back" has been replaced upon request by "List" which is more
> appropriate. So if you changed your menu with "Menu commands = ...",
please
> replace "Back" by "List" there.
Remonter
|
|
Re: $message id gives wrong value - Gernman traslalation of Back, posted by Stefan Ritt on Fri Nov 5 17:45:47 2004
> the "$message id" will not be replaced by the msg id, the string "$message
> id" will be dispalyed and used. Other substitutions as $logbook etc. are
> working.
>
> Is this a bug or did i missunderstood the manual?
Well, the manual does not state that "$message id" should work for "Subst
" option (;-)
The reason is that the message ID is available only *after* a new entry has been
written to the database, and the "Subst" command is evaluated *before* an entry
is submitted. "$message id" only works for "Thread display", "RSS Title", "Subst
on reply", "Subst on edit" and "Display". You should use
Display KlientIn/KundIn = $Vorname $Name; P: $Telefon Privat; G: $Telefon
Geschaft; N: $Telefon Mobil; $Landeskennung-$PLZ $Ortschaft [$logbook:$message id]
Please note that you wrote "mesage id", correct is however "message id" (two
"s"), so there is also a typo.
> Since Version 2.5.5: If ELOG is running under German, the "Zurück" Bottom is
> named "Back". Any Idee where I can change this back? ;-)
The link "Back" has been replaced upon request by "List" which is more
appropriate. So if you changed your menu with "Menu commands = ...", please
replace "Back" by "List" there.
Remonter
|
|
$message id gives wrong value - Gernman traslalation of Back, posted by Ulrich Trüssel on Fri Nov 5 16:59:30 2004
1.
I do not know if this is a problen of the 2.5.5 (11/03/04) version or of
other versions as well:
I'm using the $message id parameter in a substitution:
Subst KlientIn/KundIn = $Vorname $Name; P: $Telefon Privat; G: $Telefon
Geschäft; N: $Telefon Mobil; $Landeskennung-$PLZ $Ortschaft [$logbook:$mesage id]
the "$message id" will not be replaced by the msg id, the string "$message
id" will be dispalyed and used. Other substitutions as $logbook etc. are
working.
Is this a bug or did i missunderstood the manual?
2.
Since Version 2.5.5: If ELOG is running under German, the "Zurück" Bottom is
named "Back". Any Idee where I can change this back? ;-)
2.5.4-6 was corretly translated.
Remonter
|
|
Re: Can the elog client submit an entry with a html body?, posted by Kristinn B. Gylfason on Tue Nov 2 18:15:09 2004
> > Is it possible to submit an entry with a html body using the elog client?
>
> I added a "-H" flag for that. New version of elog.c under CVS and in the next
> release.
Great! Thanks.
Kristinn
Remonter
|
|
Re: Can the elog client submit an entry with a html body?, posted by Stefan Ritt on Tue Nov 2 17:47:43 2004
> Is it possible to submit an entry with a html body using the elog client?
I added a "-H" flag for that. New version of elog.c under CVS and in the next
release.
Remonter
|
|
Can the elog client submit an entry with a html body?, posted by Kristinn B. Gylfason on Tue Nov 2 02:51:09 2004
I'm running a Debian package of elog with verision number 2.5.4+r1480-1.
The revision of the elog client in this package is 1.21.
I'm using the elog client to send entries generated by a script to my
logbook. I want to format the body text of the entry using HTML, to include
links and images. When I submit the entry with the elog client it is
submited as text and not HTML.
The man page for the elog client does not mention any commandline options to
specify the formating of the entry and I have not found any info in this
forum on the issue.
Is it possible to submit an entry with a html body using the elog client?
Remonter
|
|
|
|