Demo Discussion

Forum Config Examples Contributions Vulnerabilities

Discussion forum about ELOG  Not logged in

Back  |  Find  |  Login  |  Help

changing the default to plain text rather than elcode, posted by John Habermann on Sun Jul 3 03:48:12 2005        Re: changing the default to plain text rather than elcode, posted by Stefan Ritt on Tue Jul 5 23:06:12 2005           Re: changing the default to plain text rather than elcode, posted by Tim Fowler on Thu Jul 7 02:41:40 2005              Re: changing the default to plain text rather than elcode, posted by Stefan Ritt on Thu Jul 7 08:38:11 2005                 Re: changing the default to plain text rather than elcode, posted by Tim Fowler on Thu Jul 7 22:31:40 2005              Re: changing the default to plain text rather than elcode, posted by Noah P on Thu Sep 8 03:37:44 2005

Message ID: 1412     Entry time: Thu Sep 8 03:37:44 2005     In reply to: 1230 Icon:   Author: Noah P  Author Email: na  Category: Question  OS: Linux  ELOG Version: 2.5.9+r167  Subject: Re: changing the default to plain text rather than elcode

I, too, found that this elcode.js file was missing. However, it seems to be present on this demo site! so, I downloaded it from this very demo site, and saved it to my system (in the root of your resources folder). This (so far) seems to have made the "ELCode" formatting mode work properly. This is the URL I used. It seems that this file was ommitted from the latest distribution: http://midas.psi.ch/elogs/elcode.js Hope that helps!

ELOG V3.1.5-3fb85fa6