Demo Discussion
Forum Config Examples Contributions Vulnerabilities
  Discussion forum about ELOG  Not logged in ELOG logo
icon5.gif   upgrading, posted by tony summerfelt on Wed Nov 20 17:55:07 2002 
    icon2.gif   Re: upgrading, posted by Stefan Ritt on Wed Nov 20 20:07:58 2002 
       icon2.gif   Re: upgrading, posted by tony summerfelt on Thu Nov 21 18:22:58 2002 
          icon2.gif   Re: upgrading, posted by Stefan Ritt on Fri Nov 22 09:11:27 2002 
             icon4.gif   Re: upgrading, posted by Stefan Ritt on Mon Nov 25 09:05:06 2002 
                icon6.gif   Re: upgrading, posted by tony summerfelt on Wed Nov 27 07:22:07 2002 
Message ID: 162     Entry time: Wed Nov 20 20:07:58 2002     In reply to: 161     Reply to this: 163
Icon: Reply  Author: Stefan Ritt  Author Email: stefan.ritt@psi.ch 
Category:   OS:   ELOG Version:  
Subject: Re: upgrading 
> this is happened before, and it just happened upgrading from 2.2.2 to 2.2.3
> 
> the link at the bottom of the page shows a previously installed version.
> 
> i don't install to the elog directory, i install to a ram disk and copy 
over the new executables, the source, readme and help html.
> 
> the link showed 2.1.2 until i upgraded to 2.2.2 (i didn't do anything 
different than the above. now i'm at 2.2.3 and the link is showing 
2.2.2...not that it's a big deal, i'm just wondering what i did wrong

Of course you have to stop the old elogd program and start the new one. Have 
you done that?
ELOG V3.1.5-fe60aaf