|
|
|
Demo
Discussion
|
|
Forum
Config Examples
Contributions
Vulnerabilities
|
| Discussion forum about ELOG |
Not logged in |
 |
|
|
|
|
|
Message ID: 1983
Entry time: Wed Oct 11 19:37:10 2006
In reply to: 1980
Reply to this: 1987
|
|
| Category: |
Bug report |
OS: |
Windows |
ELOG Version: |
2.6.2-1722 |
|
| Subject: |
Re: Elog v2.6.2-1722 appears to have broken "Suppress default [0|1|2|3]" option on Windows XP box |
|
|
| Stefan Ritt wrote: |
| Gregory M. Caughey wrote: | | 2.) However, email notifications will be sent under all circumstances regardless of which parameter selected. |
Thanks for reporting that problem. I just implemented Suppress email on edit and this could have had some side effect. I tried however to reproduce your problem and was not able to. Trying the "minimal" configuration file, the email notifications were suppressed if the check box was checked, or if Suppress default = 3. Can you check if it works with a minimal config file, and if yes, what option in your "full" config file causes this effect? |
OK, you're absolutely correct. When I run Elog-2.6.2-1722 with a minimal 'elogd.cfg' the "Suppress default [0|1|2|3]" flag does appear to behave as expected. Taking your advice I went through my local 'elogd.cfg' evaluating items to see where the problem starts and I found a problem. In my local config file I use conditional attributes to modify the "category" and "type" fields (in the posting form) and here is what I'm finding wrong. For this example I have set "Suppress default = 3" and the following actions take place:
1.) Select "New" to begin a post and the form displays correctly with NO "[] Suppress Email notification" checkbox showing.
2.) When selecting "Category" an choosing an appropriate menu item the form is then redrawn and now there is a problem, the "[] Suppress Email notification" checkbox is displaying. The checkbox does work correctly but the behavior I'm expecting is for no checkbox to display during the composition of this posting. Am I misunderstanding the behavior of the "Suppress default = 3" flag?
3.) Each of the other flag parameters appear to work as expected as used in the above example.
I have attached screenshots that demonstrate this behavior as well as a snippet of the 'elogd.cfg' file.
Hope this helps a little...
Thanks, Greg |
|
|
|
|
|
|