I have been trying to build and run elog under Mac OS X 10.2.6, without sucess. I
understand that this is not one of the 'supported' platforms, but I hope that there is someone
here who might know the work-around to my problem.
I've tried building elog 2.2.5, 2.3.6, 2.3.7, and 2.3.8. I've tried using the compiler that comes
in the Mac OS X 10.2 box, as well as the gcc-based compiler supplied in Apple's Dec 2002
developer update (gcc 3.1), and the June '03 update as well (gcc 3.3).
elog builds without error in all cases I tried.
When I run it, it will correctly serve the demo notebook. However, when the user clicks on the
test message to display it in full, there is a seg fault.
I suspect that the trouble might be with something defined in time.h.
I've run it in gdb, and the result is appended to this message. This is for gcc 3.3 and elog
2.3.8.
I would greatly appreciate any hints or suggestions.
Cheers, Joe
---
[satsuma:~/Documents/elog_build/elog-2.3.8] jgiaime% gdb ./elogd
GNU gdb 5.3-20030128 (Apple version gdb-282) (Fri Jun 13 03:33:07 GMT 2003)
Copyright 2003 Free Software Foundation, Inc.
GDB is free software, covered by the GNU General Public License, and you are
welcome to change it and/or distribute copies of it under certain conditions.
Type "show copying" to see the conditions.
There is absolutely no warranty for GDB. Type "show warranty" for details.
This GDB was configured as "powerpc-apple-darwin".
Reading symbols for shared libraries .. done
(gdb) run
Starting program: /Users/jgiaime/Documents/elog_build/elog-2.3.8/elogd
Reading symbols for shared libraries . done
Indexing logbook "demo" ... ok
Server listening on port 8080...
Program received signal EXC_BAD_ACCESS, Could not access memory.
0x00005870 in el_retrieve (lbs=0x1, message_id=50, date=0xbfff2500 "demo",
attr_list=0x0, attrib=0x365620, n_attr=1, text=0xbfff2280 "1", textsize=0x1,
in_reply_to=0x0, reply_to=0x0, attachment=0x0, encoding=0x0, locked_by=0x0) at src/
elogd.c:2775
2775 {
(gdb) up
#1 0x0001d9b4 in interprete (lbook=0x1 <Address 0x1 out of bounds>, path=0xbfff2280
"1") at src/elogd.c:12279
12279 show_elog_message(lbs, dec_path, command);
(gdb) up
#2 0x0001db10 in decode_get (logbook=0xbffff340 "demo", string=0x3a300a "1") at src/
elogd.c:12325
12325 interprete(logbook, path);
(gdb) up
#3 0x00020080 in server_loop (tcp_port=836736, daemon=-1073732640) at src/
elogd.c:13398
13398 decode_get(logbook, p);
(gdb) up
#4 0x00021134 in main (argc=1, argv=0xbffff850) at src/elogd.c:13832
13832 server_loop(tcp_port, daemon);
(gdb) up
Initial frame selected; you cannot go up.
(gdb) |