Demo Discussion
Forum Config Examples Contributions Vulnerabilities
  Discussion forum about ELOG  Not logged in ELOG logo
icon5.gif   Formatting parameters for attributes, posted by Ulrich Trüssel on Fri Jun 25 20:09:21 2004 
    icon2.gif   Re: Formatting parameters for attributes, posted by Stefan Ritt on Wed Jul 7 16:00:10 2004 
       icon3.gif   Re: Formatting parameters for attributes, posted by Ulrich Trüssel on Fri Jul 9 19:17:03 2004 
          icon2.gif   Re: Formatting parameters for attributes, posted by Stefan Ritt on Mon Jul 12 10:36:22 2004 
             icon14.gif   Re: Formatting parameters for attributes, posted by Ulrich Trüssel on Mon Jul 12 11:03:10 2004 
Message ID: 571     Entry time: Wed Jul 7 16:00:10 2004     In reply to: 564     Reply to this: 579
Icon: Reply  Author: Stefan Ritt  Author Email: stefan.ritt@psi.ch 
Category: Question  OS: All  ELOG Version: 2.5.3 
Subject: Re: Formatting parameters for attributes 
> I have some problems of understanding how the "Format <attribute>" parameter
> is working. It may be, that there was a similar question in the forum, but I
> didn't find it. I'm sorry if I come back with an old question.
> 
> I would like to have 2two attributes in the same line. As ex. PersonName,
> PersonCity.
> 
> If I understand the handbook correctly, it should be posslible with "Format
> <attribute> = 1". However, I'm not able to use the "Format <attribute>"
> correctly because I do not understand how to use it correctly in the cfg file.
> 
> Is there a possibilty of an example by Stafan or does anybody else already
> use this feature successfuly and is able to post a example here?

This forum uses that feature. As you can see, if you display a single entry, the
author, subject etc. are on a single line. This is achieved with

Format Author = 1
Format Author email = 1
Format Category = 1
Format OS = 1
Format ELOG Version = 1

Note that in the entry form, each attribute is on a separate line no matter what
the format specifiers are. The single line option only works for the display page.
ELOG V3.1.5-fe60aaf