Stefan:

Thanks for the analysis and information.  Why am I not surprised that the "No error" came from Windows!? 

I tried some of your suggestions with the following results:

1.  Ping ==>= works as expected on the failing machine; that is, can successfully ping "max13"  I also can ping successfully in the reverse direction; that is, from "max13" to my "client" machine.

2.  NSLookUp ==>does not work on any of the 3 machines.

3.  Added the computer name "max13" to HOSTS file; ==> observed no change in behavior (i.e., still fails)

I did notice that on the 2 machines that function as desired that there is no anti-virus software installed, while on the non-funcational machine there is A-V SW installed.  I am able to bring up eLOG via the browser on the non-functional machine, so am unsure if the A-V SW is a factor; that is, why does ELOG via browser work as expected, but not via command line. 

QUESTION:  does command line ELOG connect differently than ELOG through the browser?

I ask this question for perhaps the A-V SW *is* blocking some port or whatever, and I will need to ask our IT department how to remove such a restriction.