Demo Discussion

Forum Config Examples Contributions Vulnerabilities

Discussion forum about ELOG  Not logged in

Back  |  Find  |  Login  |  Help

Don't see login page - Self register = 1, posted by Christoph Kukulies on Wed Nov 24 10:40:41 2010        Re: Don't see login page - Self register = 1, posted by Stefan Ritt on Wed Nov 24 11:58:00 2010           Re: Don't see login page - Self register = 1, posted by Christoph Kukulies on Wed Nov 24 16:36:21 2010              Re: Don't see login page - Self register = 1, posted by Yoshio Imai on Thu Nov 25 14:15:31 2010                 Re: Don't see login page - Self register = 1, posted by Christoph Kukulies on Thu Nov 25 17:34:28 2010                    Re: Don't see login page - Self register = 1, posted by Stefan Ritt on Fri Nov 26 09:44:22 2010                    Re: Don't see login page - Self register = 1, posted by Yoshio Imai on Fri Nov 26 11:42:50 2010

Message ID: 66957     Entry time: Fri Nov 26 09:44:22 2010     In reply to: 66956 Icon:   Author: Stefan Ritt  Author Email: stefan.ritt@psi.ch  Category: Question  OS: Linux  ELOG Version: 2.8.0-2313  Subject: Re: Don't see login page - Self register = 1

Christoph Kukulies wrote: I only need to know how I get an admin passwd and user into the passwd file. elogd -a password -l logbook does not have the desired effect. It spoils the cfg-file again with Admin Password commands. I told you twice (once in this thread) that you should not mix "password file" with "admin password". These are two different authentication schemes and may not be combined. What you need is only "admin user = <name>" in your config file as written in the documentation.

ELOG V3.1.5-3fb85fa6