Demo Discussion
Forum Config Examples Contributions Vulnerabilities
  Discussion forum about ELOG  Not logged in ELOG logo
 Back  |  Find  |  Login  |  Help 
icon5.gif   Quick Filter does not work, posted by Michael Dannmeyer on Mon Jan 17 17:24:35 2011 
    icon2.gif   Re: Quick Filter does not work, posted by Stefan Ritt on Wed Jan 19 08:44:28 2011 Capture001.png
       icon2.gif   Re: Quick Filter does not work, posted by Michael Dannmeyer on Wed Jan 19 09:19:53 2011 
Message ID: 66987     Entry time: Wed Jan 19 09:19:53 2011     In reply to: 66986
Icon: Reply  Author: Michael Dannmeyer  Author Email: michael.dannmeyer@solvias.com 
Category: Question  OS: Windows  ELOG Version: 2.7.8-2280 
Subject: Re: Quick Filter does not work 

Stefan Ritt wrote:

Michael Dannmeyer wrote:

Hello,

i have a logbook with the following parameters for the Attribute "Typ":

[TEST1]
Options Typ = SDB{2}, Qualifizierung B.12.S227{4}, Qualifizierung PRO/REP{3}, Dokument zur Qualifizierung{2}, Prüf- und Wartungsvorschrift{2}, SOP ohne Change Request{2}, SOP mit Change Request{1}, Validierung PRO/REP{3}, Dokument zur Verifizierung{2}, Überprüfung und Verlängerung{2}, Spec.Sheet{2}, CoA (sofern nicht LIMS){2}, Änderungen Tg4.B07{5}, OOS (Plan/Bericht){3}, Transfer PRO/REP{3}, Studie PRO/REP{3}, Studie ohne Plan{2}, Anderes{2}
Quick filter = Date, Typ

If i choose an Entry from the "Typ" Quick Filter it shows me that there are no entries in the logbook but I'm shure that there are entries. 

Can you please help? I cannot see what's wrong.

Best Regards

Michael

 

I tried your configuration and it worked fine:

Capture001.png 

So can you try version 2.8.1 if that makes any difference. If not, can you send me your complete elogd.cfg, so that I can reproduce your problem.

- Stefan

 I installed 2.81 (Elog-latest) but this Version did not work. I got Error 193: %1 is not a valid Win32 Application as I tried to start the service. So i will sent you the complete elogd.cfg via Mail.

Best regards

Michael 

ELOG V3.1.5-3fb85fa6