When I run a mirror server and both logbooks using SSL/KRB5 then the cron job causes a segmentation fault.
I haven't tried to check it with a simple configuration yet.
My set-up: two elogd on same server, one running "german" on port 444, the other "english" on port 445.
Both are behind an apache webserver configured reverse proxy, to hide the ports for external access.
I'll try to reproduce the fault with a "minimal configuration" soon and report again.
Debug output from GDB:
run -x -c /usr/local/elog/elogd_en.cfg
Starting program: /opt/elog-2.9.0/elog/elogd -x -c /usr/local/elog/elogd_en.cfg
elogd 2.9.0 built May 30 2011, 11:14:32 revision 2414
File "/var/run/elogd.pid" exists, using "/var/run/elogd.pid.445" instead.
Falling back to default group "elog"
Falling back to default user "elog"
User "elog" not found
Falling back to default user "nobody"
FCKedit detected
Falling back to default group "elog"
Falling back to default user "elog"
User "elog" not found
Falling back to default user "nobody"
ImageMagick detected
Indexing logbooks ... done
SSLServer listening on port 445 ...
Program received signal SIGSEGV, Segmentation fault.
0x0030b7b5 in SSL_write () from /lib/libssl.so.6 |