Demo Discussion
Forum Config Examples Contributions Vulnerabilities
  Discussion forum about ELOG  Not logged in ELOG logo
 Back  |  Find  |  Login  |  Help 
icon5.gif   Problems with Autorization, posted by Michael Dannmeyer on Wed Jun 27 10:42:20 2012 
    icon2.gif   Re: Problems with Autorization, posted by Andreas Luedeke on Wed Jul 4 14:04:10 2012 
       icon2.gif   Re: Problems with Autorization, posted by Michael Dannmeyer on Thu Jul 5 11:18:40 2012 
          icon2.gif   Re: Problems with Autorization, posted by Stefan Ritt on Fri Jul 13 09:03:02 2012 
             icon14.gif   Re: Problems with Autorization, posted by Michael Dannmeyer on Fri Jul 13 15:12:07 2012 
Message ID: 67299     Entry time: Thu Jul 5 11:18:40 2012     In reply to: 67297     Reply to this: 67300
Icon: Reply  Author: Michael Dannmeyer  Author Email: michael.dannmeyer@solvias.com 
Category: Question  OS: Windows  ELOG Version: 2.9.0-2396 
Subject: Re: Problems with Autorization 

Andreas Luedeke wrote:

Michael Dannmeyer wrote:

Hello,

we used Admin and write passwords. Now this is no longer supported in ELOG 2.9.0 and I tried to change to File or Kerberos Autentication. But nothing worked. I tried the following lines in elog.cfg

[Serverlogbuch]
Authentication = File
Password file = C:\Program Files\ELOG\logbooks\Serverlogbuch\pwd.txt
Self Authentication = 1

So the self Autentication site opens and I can put in all informations. But if I click on save he tries to save the information in the password file and after a time he stops and Internet Explorer says that the page cannot be reached.

The file is not saved. If I remove the 3 lines the logbook opens without any problems.

I tried also kerberos but it didn't work. But there I think some entries in the krb5.ini are wrong.

Would you please help solving the File password problem?

[...]

Just two hints:

  • The file mentioned as "Password file" should be writeable for the "elogd" process. It is needed for both, Kerberos and File authentication. Better not specify the full path, it should assume the file in the logbook directory.
  • The command "Self Authentication = 1" does not exist. Maybe you mean "Self register = 1"?

Thank you for the answer, but it didn't solve the problem.

  • I used Self Register instead of Self Authentication. I deleted the complete path and only used the Filename.

  • The Account which is used to start the Elogd process is local system. System has full right at the logbook directory

 Should I use an Admin Account for the elogd process? The error message is always the same (page not reachable) The File is also not created in the logbook dir.

 

ELOG V3.1.5-3fb85fa6