> Noee. Here it works immediately.
>
> Can you try with a fresh server from the distribution, with the example
> elogd.cfg, to see if there is any difference?
>
> The killing is handled in the funciton ctrlc_handler(), which sets _abort =
> TRUE. This is checked in line 16195, just after the select(), and the main
> loop is exited. The select finishes after one second, although I believe
> that the kill signal also terminates the select prematurely. The kill
> command and a Ctrl-C keystroke should work the same way, they both generate
> a SIGTERM or SIGINT signal.
elogd does not exit if there is an 'unprocessed' HUP. So when you do
kill -HUP <pid>
kill <pid>
elogd will only exit after it was accessed. |