Demo Discussion
Forum Config Examples Contributions Vulnerabilities
  Discussion forum about ELOG  Not logged in ELOG logo
icon3.gif   Attribute not updated, posted by Francois Cloutier on Wed May 13 14:58:46 2015 
    icon2.gif   Re: Attribute not updated, posted by Francois Cloutier on Wed May 13 15:19:55 2015 
    icon2.gif   Re: Attribute not updated, posted by Andreas Luedeke on Thu May 14 02:02:45 2015 
       icon2.gif   Re: Attribute not updated, posted by Francois Cloutier on Thu May 14 02:27:58 2015 
          icon6.gif   Re: Attribute not updated, posted by Andreas Luedeke on Thu May 14 04:59:03 2015 
             icon2.gif   Re: Attribute not updated, posted by Francois Cloutier on Thu May 14 05:08:06 2015 
                icon2.gif   Re: Attribute not updated, posted by Midas User on Tue Jun 9 15:28:53 2015 
Message ID: 67907     Entry time: Thu May 14 04:59:03 2015     In reply to: 67905     Reply to this: 67908
Icon: Cool  Author: Andreas Luedeke  Author Email: andreas.luedeke@psi.ch 
Category: Bug report  OS: Windows  ELOG Version: 3.1.0-3 
Subject: Re: Attribute not updated 
 
> Seriously, I really hope It could make it... Could you try it on your side ?

My personal opinion here is, that if you want others to investigate your problems, then the best way to do it is like that:
- attach a minimal configuration that reproduces your problem (never attach a 100 line configuration, unless you've tested that the problem disappears
regardless of which line you remove!);
- attach the entry data, if the behaviour depends on the data;
- use a specific, to the point subject line;
- explain what you did, what happened and what you would have expected to happen;
- ask kindly; and then
- wait and hope for the best ;-)

(This is actually a very general procedure; I think it is applicable to all newsgroups, forums, etc.)

BTW: This tip was absolutely free of charge ;-)
ELOG V3.1.5-fe60aaf