Demo Discussion
Forum Config Examples Contributions Vulnerabilities
  Discussion forum about ELOG  Not logged in ELOG logo
 Back  |  Find  |  Login  |  Help 
Entry   Problem with a draft message, posted by David Pilgram on Tue Jun 9 17:17:11 2015 
    icon2.gif   Re: Problem with a draft message, posted by David Pilgram on Tue Jun 9 17:21:25 2015 
       icon2.gif   Re: Problem with a draft message, posted by David Pilgram on Tue Jun 9 17:23:27 2015 
          icon2.gif   Re: Problem with a draft message, posted by Stefan Ritt on Tue Jun 9 19:35:28 2015 
             icon2.gif   Re: Problem with a draft message, posted by David Pilgram on Tue Jun 9 20:26:00 2015 
Message ID: 67989     Entry time: Tue Jun 9 20:26:00 2015     In reply to: 67988
Icon: Reply  Author: David Pilgram  Author Email: David.Pilgram@epost.org.uk 
Category: Bug report  OS: Linux  ELOG Version: V3.1.1-22022e6 
Subject: Re: Problem with a draft message 

I missed or don't remember that post.  My vote is replace "Back" with "Delete" - or "Abort"

Stefan Ritt wrote:

Just read what I wrote at elog:67983

David Pilgram wrote:

Just to comment that the expected emails that one would have expected with the last two entries have either
been held up or simply have not been generated and sent - both the preceeding entries were submitted by using the "Back" button, this time I'll use the "Submit" button, which should generate a email.

David Pilgram wrote:

Just to comment that I submitted the entry below by pressing the "Back" button!

David Pilgram wrote:

Hi Stefan,

I had started to write a completely different bug report, but then realised I had not checked a detail.  I had written about one sentence.  So I decided to abort the message, and hit the "back" button.  Only I found that this had created a new entry in the elog listings.  I immediately went in and deleted it, but I had expected the "Back" button to have aborted the entry (as it does in 2.9.x) not to submit the entry!

It doesn't seem to have created an email, though.  And for the sake of all your users, I'd not want to experiment here on the matter too much!

 

 

 

 

ELOG V3.1.5-fe60aaf