Hi Stefan,
yes, I know that a plain text " elog:1" works in the HTML editor, too. But if you put " elog:1" in the URL field of the link dialog, then ELOG screws up: you get the text and the link points to link type "URL", protocol "<other>", URL "1".
Or more precisely, the HTML source looks like the following:
<a href="1">elog.1</a>"><a href="1">elog.1</a>
(I've replaced ":" by "." here in the source, to avoid another iteration of links by ELOG).
That is not what I would have expected:
either it should have been remained unchanged, or it should point to the right URL of the entry elog:1 (the latter case preferred :-).
Cheers, Andreas
| Stefan Ritt wrote: |
|
Right, spaces won't work. But others work. Andreas, if you just put elog:1 without any link etc. just as plain text, it will be converted automatically into a link.
A workaround is to explicitly specify a link to an elog entry. Press the link button from the editor toolbar, enter a name and copy the full URL from the browser address bar, like here: https://midas.psi.ch/elogs/Forum/68129. If you switch to "Source" (Top left editor toolbar, you can changed the link name manually, like here.
| Andreas Luedeke wrote: |
|
I can confirm this bug.
But I don't think this has to work as you've described it, when using the HTML editor: if you use HTML, you can use the link feature of the editor.
But that link feature does currently not work at all with internal elog references, not even a simple elog:1"> elog:1 (as you can see here). I suppose there is some more work to do for Stefan on that ;-)
Cheers, Andreas
| Edmund Hertle wrote: |
|
Hey,
the syntax for creating links to other elog entries has a small issue in the HTML editor. The link will not be created properly if there are whitespaces in the name of the logbook. Using ELCode (or in a simple attribute field) the whitespaces can be replaced by "+", but this does not work in the HTML editor. The work-around would be to use ELCode mark-up instead of HTML.
Example 1 (this should work): elog:Contributions/47
Example 2 (this will not work): elog:Config+Examples/11
Example 3 (will also not work): elog:Config%20Examples/11
|
|
|
|