Demo Discussion
Forum Config Examples Contributions Vulnerabilities
  Discussion forum about ELOG  Not logged in ELOG logo
icon1.gif   Execute new|edit doesn't seem to work, posted by Juergen Diefenbach on Fri Feb 26 17:35:54 2016 
    icon2.gif   Re: Execute new|edit doesn't seem to work, posted by Andreas Luedeke on Sun Feb 28 18:24:58 2016 
       icon2.gif   Re: Execute new|edit doesn't seem to work, posted by Juergen Diefenbach on Mon Mar 7 13:03:13 2016 
          icon2.gif   Re: Execute new|edit doesn't seem to work, posted by Andreas Luedeke on Tue Mar 8 14:12:26 2016 
Message ID: 68277     Entry time: Tue Mar 8 14:12:26 2016     In reply to: 68276
Icon: Reply  Author: Andreas Luedeke  Author Email: andreas.luedeke@psi.ch 
Category: Bug report  OS: Linux  ELOG Version: 3.1.1 
Subject: Re: Execute new|edit doesn't seem to work 

Juergen Diefenbach wrote:

Andreas Luedeke wrote:
I'm just guessing, but you could try to disable the "save drafts" feature and see if the behaviour changes:
Save drafts = 0

If that is the case then Stefan will know where to look Wink

Cheers
Andreas


Alright, I tried "Save drafts = 0" in the config file and now it seems to work all the time as expected!
Thank you, Andreas!

In principle I could live with this as I don't think I need to have drafts enabled.

Cheers,
Jürgen


I would speculate that "Execute new" is not executed, when a draft is saved (as one would expect, since it's only a draft), but is neither executed when a draft is submitted (not as one would expect).
Good that you're fine for the moment.
If you could add a minimal configuration to reproduce the problem, then Stefan would have it easier to debug it.
ELOG V3.1.5-fe60aaf