Hi Susan,
according to the documentation you need to add "Hosts deny = All" in addition to the "Hosts allow" command.
Here is the relevant excerpt from the documentation (https://midas.psi.ch/elog/config.html#access).
Cheers
Andreas
Hosts allow = <list>Hosts deny = <list>
These two settings can be used to restrict the access to the logbook to certain computers. It is similar to the UNIX hosts.allow and hosts.deny files. The list can consist of individual host names or IP numbers, subnet masks like 123.213. (note the trailing '.') or .mit.edu, or the word All. The following rules are applied:
- Access will be granted when a host matches a pattern in "hosts allow".
- Otherwise, access will be denied when a host matches a pattern in "hosts deny".
- Otherwise, access will be granted.
These rules are applied before any password is checked. To debug problems, start elogd with the "-v" flag, in which case the rule checking is printed on the screen.
| Susan James wrote: |
|
I'm trying to wrap our elog instance to our company domain which is lbl.gov
I add this entry below (without quotes) to elogd.cfg and it's not working. the world can see our logbooks
" Hosts Allow = *.lbl.gov ".
can someone help?
|
|