Demo Discussion
Forum Config Examples Contributions Vulnerabilities
  Discussion forum about ELOG  Not logged in ELOG logo
 Back  |  Find  |  Login  |  Help 
icon5.gif   how to insert images inline, posted by Piotr Zolnierczuk on Tue Mar 6 16:59:29 2018 
    icon2.gif   Re: how to insert images inline, posted by Stefan Ritt on Tue Mar 6 17:28:46 2018 
       icon5.gif   Re: how to insert images inline, posted by Piotr Zolnierczuk on Tue Mar 6 17:49:49 2018 
          icon14.gif   Re: how to insert images inline, posted by Piotr Zolnierczuk on Tue Mar 6 18:01:30 2018 
Message ID: 68759     Entry time: Tue Mar 6 17:49:49 2018     In reply to: 68758     Reply to this: 68760
Icon: Question  Author: Piotr Zolnierczuk  Author Email: zolnie@yahoo.com 
Category: Question  OS: Linux  ELOG Version: 3.1.3 
Subject: Re: how to insert images inline 

I did just that. The image was properly send to the server (it appears in the attachement list). However clicking OK still produces "Image source URL is missing".

What is the URL that refers to an attachment? I've tried 68759/<1> and 68759/1 and even elog:1234/<1> (where 1234).

 

Stefan Ritt wrote:

Before you click OK on your point 4, click on "Send to Server".

Stefan

Piotr Zolnierczuk wrote:

Hi,

I recently upgraded elog from 2.7 to 3.1 and have a hard time to insert images inline. The attachements work just fine. I am certain it is something silly, but I cannot figure it out.

  1. In edit mode, I click the image icon
  2. A pop-up "Image Propertied" shows with two tabs "Image Info" and "Upload" (selected)
  3. Click on Browse button and select an image
  4. Now
    • if I click OK, I get an error "Image source URL is missing".
    • if I go to "Image Info" tab - what URL am I supposed to enter, 68757/<1> ?

I found an old thread elog:68410 (from 2016) but could not find a solution that would work for me. Where does "Preview attachments" option should be inserted? In the global section?

Hopefully there's a simple explanation for this

Piotr

 

 

ELOG V3.1.5-fe60aaf