ah yes, that was a helpful clue. Our elogd.cfg file led me to a .js file which redefines the ID to the elog:SequencerEvents/XXXXX format and it indeed had a silly hard coded length of that string.
Since I am pretty sure this is our code, I think it is safe to say that this is not a bug in the elog
| Andreas Luedeke wrote: |
|
Well, in my example the ID link worked just fine.
There could be a string length limitation, but it could be as well the way you are creating the ID that is the source of the problem: I would need the part of your elogd.cfg that defines how you format your ID in order to try to reproduce your problem.
Cheers, Andreas
| Chris Rasmussen wrote: |
|
Hi Andreas, I'm working on the same experiment as Joseph who submitted the bug report.
You are right, IDs greater than 10^5 are created no problem. The issue is with the internal elog link, in this case of the form elog:SequencerEvents/XXXXX The link generated uses only the first 5 digits of the message ID, and therefore links to the wrong message. In the two attachments you can see our sequencer event number 100098, first displaying the message where all of the ID is displayed and secondly in "full" view of the elog front page. Here, the "ID" column contains a link with the string: elog:SequencerEvents/10009. Our problem is that we often use this string to paste into other elogs and generate a link to the sequencer event message. However, since the string uses too few digits, we end up with a link to the wrong message
| Andreas Luedeke wrote: |
|
I am not sure I understand your bug report.
I can easily create IDs greater than 100'000 (see attached picture), but that is not your problem, or is it?
Cheers, Andreas
| Joseph McKenna wrote: |
|
We have a possible bug with elog that the ID for an elog entry at over 99,999 entires reads as 10,000...
68792/1 Illistrates the problem, we use this ID often to cross reference from out datalog...
Is this a know bug we can find a fix for? We are using: elogd 2.9.2 built Jul 14 2015, 18:58:06 revision
|
|
|
|
|