Latest compile effort on Fedora 28 using the bitbucket source downloaded at 21:12 PDT:
make
gcc -O3 -funroll-loops -fomit-frame-pointer -W -Wall -Wno-deprecated-declarations -Imxml -DHAVE_SSL -c -o mxml.o mxml/mxml.c
mxml/mxml.c: In function ‘mxml_write_attribute.part.1’:
mxml/mxml.c:515:25: warning: ‘%s’ directive writing up to 4095 bytes into a region of size between 4094 and 8189 [-Wformat-overflow=]
sprintf(line, " %s=\"%s\"", name_enc, val_enc);
^~ ~~~~~~~
mxml/mxml.c:515:4: note: ‘sprintf’ output between 5 and 8195 bytes into a destination of size 8192
sprintf(line, " %s=\"%s\"", name_enc, val_enc);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
mxml/mxml.c: In function ‘mxml_parse_entity’:
mxml/mxml.c:1932:38: warning: ‘sprintf’ may write a terminating nul past the end of the destination [-Wformat-overflow=]
sprintf(filename, "%s%c%s", directoryname, DIR_SEPARATOR, entity_reference_name[i]);
^
mxml/mxml.c:1932:13: note: ‘sprintf’ output 2 or more bytes (assuming 4097) into a destination of size 4096
sprintf(filename, "%s%c%s", directoryname, DIR_SEPARATOR, entity_reference_name[i]);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
gcc -O3 -funroll-loops -fomit-frame-pointer -W -Wall -Wno-deprecated-declarations -Imxml -DHAVE_SSL -w -c -o crypt.o src/crypt.c
gcc -O3 -funroll-loops -fomit-frame-pointer -W -Wall -Wno-deprecated-declarations -Imxml -DHAVE_SSL -w -c -o regex.o src/regex.c
gcc -O3 -funroll-loops -fomit-frame-pointer -W -Wall -Wno-deprecated-declarations -Imxml -DHAVE_SSL -c -o strlcpy.o mxml/strlcpy.c
gcc -O3 -funroll-loops -fomit-frame-pointer -W -Wall -Wno-deprecated-declarations -Imxml -DHAVE_SSL -o elog src/elog.c mxml.o crypt.o regex.o strlcpy.o -lssl
src/elog.c: In function ‘retrieve_elog’:
src/elog.c:524:13: warning: ‘strncpy’ specified bound 256 equals destination size [-Wstringop-truncation]
strncpy(str, strstr(response, "Location:") + 10, sizeof(str));
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
src/elog.c: In function ‘submit_elog’:
src/elog.c:982:10: warning: ‘strncpy’ specified bound 80 equals destination size [-Wstringop-truncation]
strncpy(str, strstr(response, "Error: Attribute") + 20, sizeof(str));
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
src/elog.c:977:10: warning: ‘strncpy’ specified bound 80 equals destination size [-Wstringop-truncation]
strncpy(str, strstr(response, "Error: Attribute") + 27, sizeof(str));
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
src/elog.c:956:13: warning: ‘strncpy’ specified bound 80 equals destination size [-Wstringop-truncation]
strncpy(str, strstr(response, "Location:") + 10, sizeof(str));
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
gcc -O3 -funroll-loops -fomit-frame-pointer -W -Wall -Wno-deprecated-declarations -Imxml -DHAVE_SSL -w -c -o auth.o src/auth.c
gcc -O3 -funroll-loops -fomit-frame-pointer -W -Wall -Wno-deprecated-declarations -Imxml -DHAVE_SSL -o elogd src/elogd.c auth.o mxml.o crypt.o regex.o strlcpy.o -lssl
src/elogd.c: In function ‘cleanup’:
src/elogd.c:30641:48: warning: ‘%s’ directive writing up to 255 bytes into a region of size 233 [-Wformat-overflow=]
sprintf(str, "Cannot remove pidfile \"%s\"\n", pidfile);
^~ ~~~~~~~
src/elogd.c:30641:10: note: ‘sprintf’ output between 26 and 281 bytes into a destination of size 256
sprintf(str, "Cannot remove pidfile \"%s\"\n", pidfile);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
src/elogd.c: In function ‘split_url’:
src/elogd.c:2490:4: warning: ‘strncpy’ specified bound 256 equals destination size [-Wstringop-truncation]
strncpy(str, p, sizeof(str));
^~~~~~~~~~~~~~~~~~~~~~~~~~~~
src/elogd.c: In function ‘getcfg’:
src/elogd.c:3091:28: warning: ‘%s’ directive writing up to 255 bytes into a region of size 249 [-Wformat-overflow=]
src/elogd.c:2753:14:
return _topgroup;
~~~~~~~~~
src/elogd.c:3091:28:
sprintf(str, "global %s", getcfg_topgroup());
^~
src/elogd.c:3091:7: note: ‘sprintf’ output between 8 and 263 bytes into a destination of size 256
sprintf(str, "global %s", getcfg_topgroup());
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
src/elogd.c: In function ‘getcfg.constprop’:
src/elogd.c:3091:28: warning: ‘%s’ directive writing up to 255 bytes into a region of size 249 [-Wformat-overflow=]
src/elogd.c:2753:14:
return _topgroup;
~~~~~~~~~
src/elogd.c:3091:28:
sprintf(str, "global %s", getcfg_topgroup());
^~
src/elogd.c:3091:7: note: ‘sprintf’ output between 8 and 263 bytes into a destination of size 256
sprintf(str, "global %s", getcfg_topgroup());
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
src/elogd.c: In function ‘ss_file_find’:
src/elogd.c:3775:10: warning: ‘strncpy’ output truncated before terminating nul copying as many bytes from a string as its length [-Wstringop-truncation]
strncpy(*plist + (i * MAX_PATH_LENGTH), dp->d_name, strlen(dp->d_name));
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
src/elogd.c: In function ‘html_allowed’:
src/elogd.c:3091:28: warning: ‘%s’ directive writing up to 255 bytes into a region of size 249 [-Wformat-overflow=]
src/elogd.c:2753:14:
return _topgroup;
~~~~~~~~~
src/elogd.c:3091:28:
sprintf(str, "global %s", getcfg_topgroup());
^~
src/elogd.c:3091:7: note: ‘sprintf’ output between 8 and 263 bytes into a destination of size 256
sprintf(str, "global %s", getcfg_topgroup());
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
src/elogd.c: In function ‘create_thumbnail.part.38’:
src/elogd.c:24226:41: warning: ‘%s’ directive writing up to 511 bytes into a region of size 243 [-Wformat-overflow=]
sprintf(thumb_size, " -thumbnail '%s'", str);
^~ ~~~
src/elogd.c:24226:7: note: ‘sprintf’ output between 15 and 526 bytes into a destination of size 256
sprintf(thumb_size, " -thumbnail '%s'", str);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
src/elogd.c:24253:40: warning: ‘ '’ directive output may be truncated writing 2 bytes into a region of size between 1 and 511 [-Wformat-truncation=]
snprintf(cmd, sizeof(cmd), "%s %s '%s[0-7]'%s '%s'", _convert_cmd, thumb_options, file_name, thumb_size, str);
^~
src/elogd.c:24253:7: note: ‘snprintf’ output 13 or more bytes (assuming 1289) into a destination of size 512
snprintf(cmd, sizeof(cmd), "%s %s '%s[0-7]'%s '%s'", _convert_cmd, thumb_options, file_name, thumb_size, str);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
src/elogd.c:24255:40: warning: ‘ '’ directive output may be truncated writing 2 bytes into a region of size between 1 and 511 [-Wformat-truncation=]
snprintf(cmd, sizeof(cmd), "%s %s '%s'%s '%s'", _convert_cmd, thumb_options, file_name, thumb_size, str);
^~
src/elogd.c:24255:7: note: ‘snprintf’ output 8 or more bytes (assuming 1284) into a destination of size 512
snprintf(cmd, sizeof(cmd), "%s %s '%s'%s '%s'", _convert_cmd, thumb_options, file_name, thumb_size, str);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
src/elogd.c:24263:40: warning: ‘%s’ directive output may be truncated writing up to 511 bytes into a region of size 505 [-Wformat-truncation=]
snprintf(str, sizeof(str), "SHELL \"%s\"", cmd);
^~ ~~~
src/elogd.c:24263:4: note: ‘snprintf’ output between 9 and 520 bytes into a destination of size 512
snprintf(str, sizeof(str), "SHELL \"%s\"", cmd);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
src/elogd.c: In function ‘rsputs_elcode’:
src/elogd.c:6618:71: warning: ‘%s’ directive output may be truncated writing up to 999 bytes into a region of size 993 [-Wformat-truncation=]
snprintf(hattrib, sizeof(hattrib), "http://%s", attrib);
^~ ~~~~~~
src/elogd.c:6618:28: note: ‘snprintf’ output between 8 and 1007 bytes into a destination of size 1000
snprintf(hattrib, sizeof(hattrib), "http://%s", attrib);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
src/elogd.c:6616:72: warning: ‘%s’ directive output may be truncated writing up to 999 bytes into a region of size 992 [-Wformat-truncation=]
snprintf(hattrib, sizeof(hattrib), "https://%s", attrib);
^~ ~~~~~~
src/elogd.c:6616:28: note: ‘snprintf’ output between 9 and 1008 bytes into a destination of size 1000
snprintf(hattrib, sizeof(hattrib), "https://%s", attrib);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
src/elogd.c:6568:53: warning: ‘%s’ directive writing up to 999 bytes into a region of size 993 [-Wformat-overflow=]
sprintf(hattrib, "http://%s", attrib);
^~ ~~~~~~
src/elogd.c:6568:28: note: ‘sprintf’ output between 8 and 1007 bytes into a destination of size 1000
sprintf(hattrib, "http://%s", attrib);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
src/elogd.c:6566:54: warning: ‘%s’ directive writing up to 999 bytes into a region of size 992 [-Wformat-overflow=]
sprintf(hattrib, "https://%s", attrib);
^~ ~~~~~~
src/elogd.c:6566:28: note: ‘sprintf’ output between 9 and 1008 bytes into a destination of size 1000
sprintf(hattrib, "https://%s", attrib);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
src/elogd.c: In function ‘el_submit_attachment’:
src/elogd.c:4696:55: warning: ‘%s’ directive writing up to 255 bytes into a region of size 226 [-Wformat-overflow=]
sprintf(str, "Cannot write attachment file \"%s\"", file_name);
^~ ~~~~~~~~~
src/elogd.c:4696:10: note: ‘sprintf’ output between 32 and 287 bytes into a destination of size 256
sprintf(str, "Cannot write attachment file \"%s\"", file_name);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
src/elogd.c: In function ‘attrib_from_param’:
src/elogd.c:9364:30: warning: ‘%d’ directive writing between 1 and 3 bytes into a region of size between 0 and 1499 [-Wformat-overflow=]
sprintf(str, "%s_%d", ua, j);
^~
src/elogd.c:9364:26: note: directive argument in the range [0, 100]
sprintf(str, "%s_%d", ua, j);
^~~~~~~
src/elogd.c:9364:13: note: ‘sprintf’ output between 3 and 1504 bytes into a destination of size 1500
sprintf(str, "%s_%d", ua, j);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~
src/elogd.c: In function ‘el_retrieve’:
src/elogd.c:4503:46: warning: ‘%s’ directive output may be truncated writing up to 255 bytes into a region of size between 1 and 256 [-Wformat-truncation=]
snprintf(file_name, sizeof(file_name), "%s%s%s", lbs->data_dir, lbs->el_index[index].subdir, lbs->el_index[index].file_name);
^~
src/elogd.c:4503:4: note: ‘snprintf’ output between 1 and 542 bytes into a destination of size 256
snprintf(file_name, sizeof(file_name), "%s%s%s", lbs->data_dir, lbs->el_index[index].subdir, lbs->el_index[index].file_name);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
src/elogd.c: In function ‘el_retrieve_attachment.part.32’:
src/elogd.c:4764:46: warning: ‘%s’ directive output may be truncated writing up to 255 bytes into a region of size between 1 and 256 [-Wformat-truncation=]
snprintf(file_name, sizeof(file_name), "%s%s%s", lbs->data_dir, lbs->el_index[index].subdir, lbs->el_index[index].file_name);
^~
src/elogd.c:4764:4: note: ‘snprintf’ output between 1 and 542 bytes into a destination of size 256
snprintf(file_name, sizeof(file_name), "%s%s%s", lbs->data_dir, lbs->el_index[index].subdir, lbs->el_index[index].file_name);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
src/elogd.c: In function ‘el_submit’:
src/elogd.c:4894:49: warning: ‘%s’ directive output may be truncated writing up to 255 bytes into a region of size between 1 and 256 [-Wformat-truncation=]
snprintf(file_name, sizeof(file_name), "%s%s%s", lbs->data_dir, lbs->el_index[index].subdir, lbs->el_index[index].file_name);
^~
src/elogd.c:4894:7: note: ‘snprintf’ output between 1 and 542 bytes into a destination of size 256
snprintf(file_name, sizeof(file_name), "%s%s%s", lbs->data_dir, lbs->el_index[index].subdir, lbs->el_index[index].file_name);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
src/elogd.c: In function ‘el_retrieve.constprop’:
src/elogd.c:4503:46: warning: ‘%s’ directive output may be truncated writing up to 255 bytes into a region of size between 1 and 256 [-Wformat-truncation=]
snprintf(file_name, sizeof(file_name), "%s%s%s", lbs->data_dir, lbs->el_index[index].subdir, lbs->el_index[index].file_name);
^~
src/elogd.c:4503:4: note: ‘snprintf’ output between 1 and 542 bytes into a destination of size 256
snprintf(file_name, sizeof(file_name), "%s%s%s", lbs->data_dir, lbs->el_index[index].subdir, lbs->el_index[index].file_name);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
src/elogd.c: In function ‘el_retrieve.constprop’:
src/elogd.c:4503:46: warning: ‘%s’ directive output may be truncated writing up to 255 bytes into a region of size between 1 and 256 [-Wformat-truncation=]
snprintf(file_name, sizeof(file_name), "%s%s%s", lbs->data_dir, lbs->el_index[index].subdir, lbs->el_index[index].file_name);
^~
src/elogd.c:4503:4: note: ‘snprintf’ output between 1 and 542 bytes into a destination of size 256
snprintf(file_name, sizeof(file_name), "%s%s%s", lbs->data_dir, lbs->el_index[index].subdir, lbs->el_index[index].file_name);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
src/elogd.c: In function ‘show_download_page’:
src/elogd.c:14786:52: warning: ‘%s’ directive output may be truncated writing up to 255 bytes into a region of size between 1 and 256 [-Wformat-truncation=]
snprintf(file_name, sizeof(file_name), "%s%s%s", lbs->data_dir, lbs->el_index[index].subdir, lbs->el_index[index].file_name);
^~
src/elogd.c:14786:10: note: ‘snprintf’ output between 1 and 542 bytes into a destination of size 256
snprintf(file_name, sizeof(file_name), "%s%s%s", lbs->data_dir, lbs->el_index[index].subdir, lbs->el_index[index].file_name);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
src/elogd.c: In function ‘show_page_filters’:
src/elogd.c:19317:45: warning: ‘$’ directive writing 1 byte into a region of size between 0 and 1499 [-Wformat-overflow=]
sprintf(option_whole, "^%s$", option);
^
src/elogd.c:19317:19: note: ‘sprintf’ output between 3 and 1502 bytes into a destination of size 1500
sprintf(option_whole, "^%s$", option);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
src/elogd.c: In function ‘is_inline_attachment’:
src/elogd.c:24205:31: warning: ‘%s’ directive writing up to 255 bytes into a region of size between 237 and 247 [-Wformat-overflow=]
sprintf(str, "cid:att%d@%s", i, domain);
^~ ~~~~~~
src/elogd.c:24205:7: note: ‘sprintf’ output between 10 and 275 bytes into a destination of size 256
sprintf(str, "cid:att%d@%s", i, domain);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
src/elogd.c: In function ‘load_password_file’:
src/elogd.c:25739:58: warning: ‘%s’ directive writing up to 255 bytes into a region of size 226 [-Wformat-overflow=]
sprintf(str, "Cannot convert password file \"%s\"", file_name);
^~ ~~~~~~~~~
src/elogd.c:25739:13: note: ‘sprintf’ output between 32 and 287 bytes into a destination of size 256
sprintf(str, "Cannot convert password file \"%s\"", file_name);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
src/elogd.c:25728:70: warning: ‘%s’ directive writing up to 255 bytes into a region of size 211 [-Wformat-overflow=]
sprintf(str, "Cannot access write protected password file \"%s\"", file_name);
^~ ~~~~~~~~~
src/elogd.c:25728:10: note: ‘sprintf’ output between 47 and 302 bytes into a destination of size 256
sprintf(str, "Cannot access write protected password file \"%s\"", file_name);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
src/elogd.c:25719:54: warning: ‘%s’ directive writing up to 255 bytes into a region of size 227 [-Wformat-overflow=]
sprintf(str, "Cannot access password file \"%s\"", file_name);
^~ ~~~~~~~~~
src/elogd.c:25719:10: note: ‘sprintf’ output between 31 and 286 bytes into a destination of size 256
sprintf(str, "Cannot access password file \"%s\"", file_name);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
src/elogd.c:25699:43: warning: ‘%s’ directive writing up to 255 bytes into a region of size 238 [-Wformat-overflow=]
sprintf(str, "Cannot open file \"%s\"", file_name);
^~ ~~~~~~~~~
src/elogd.c:25699:10: note: ‘sprintf’ output between 20 and 275 bytes into a destination of size 256
sprintf(str, "Cannot open file \"%s\"", file_name);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
src/elogd.c: In function ‘rename_logbook’:
src/elogd.c:13118:27: warning: ‘%s’ directive writing up to 255 bytes into a region of size between 1 and 256 [-Wformat-overflow=]
sprintf(old_dir, "%s%s", lb_dir, lbs->name);
^~
src/elogd.c:13118:7: note: ‘sprintf’ output between 1 and 511 bytes into a destination of size 256
sprintf(old_dir, "%s%s", lb_dir, lbs->name);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
src/elogd.c: In function ‘execute_shell.part.42’:
src/elogd.c:22772:26: warning: ‘%s’ directive writing up to 9999 bytes into a region of size 1493 [-Wformat-overflow=]
sprintf(str, "SHELL \"%s\"", shell_cmd);
^~ ~~~~~~~~~
src/elogd.c:22772:4: note: ‘sprintf’ output between 9 and 10008 bytes into a destination of size 1500
sprintf(str, "SHELL \"%s\"", shell_cmd);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
src/elogd.c: In function ‘el_delete_message’:
src/elogd.c:5242:46: warning: ‘%s’ directive output may be truncated writing up to 255 bytes into a region of size between 1 and 256 [-Wformat-truncation=]
snprintf(file_name, sizeof(file_name), "%s%s%s", lbs->data_dir, lbs->el_index[index].subdir, lbs->el_index[index].file_name);
^~
src/elogd.c:5242:4: note: ‘snprintf’ output between 1 and 542 bytes into a destination of size 256
snprintf(file_name, sizeof(file_name), "%s%s%s", lbs->data_dir, lbs->el_index[index].subdir, lbs->el_index[index].file_name);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
src/elogd.c: In function ‘copy_to’:
src/elogd.c:24081:28: warning: ‘%s’ directive writing up to 255 bytes into a region of size 252 [-Wformat-overflow=]
sprintf(str, "?lb=%s\"", lbs->name_enc);
^~
src/elogd.c:24081:10: note: ‘sprintf’ output between 6 and 261 bytes into a destination of size 256
sprintf(str, "?lb=%s\"", lbs->name_enc);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
src/elogd.c:24085:28: warning: ‘%s’ directive writing up to 255 bytes into a region of size 252 [-Wformat-overflow=]
sprintf(str, "?lb=%s&", lbs->name_enc);
^~
src/elogd.c:24085:10: note: ‘sprintf’ output between 6 and 261 bytes into a destination of size 256
sprintf(str, "?lb=%s&", lbs->name_enc);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
src/elogd.c:24085:28: warning: ‘%s’ directive writing up to 255 bytes into a region of size 252 [-Wformat-overflow=]
sprintf(str, "?lb=%s&", lbs->name_enc);
^~
src/elogd.c:24085:10: note: ‘sprintf’ output between 6 and 261 bytes into a destination of size 256
sprintf(str, "?lb=%s&", lbs->name_enc);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
src/elogd.c: In function ‘show_logbook_new’:
src/elogd.c:14689:24: warning: ‘%s’ directive writing up to 255 bytes into a region of size 253 [-Wformat-overflow=]
sprintf(str, "../%s/?cmd=Config", lbn);
^~ ~~~
src/elogd.c:14689:7: note: ‘sprintf’ output between 16 and 271 bytes into a destination of size 256
sprintf(str, "../%s/?cmd=Config", lbn);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
src/elogd.c: In function ‘display_line’:
src/elogd.c:17743:37: warning: ‘%s’ directive writing up to 1499 bytes into a region of size between 1412 and 1491 [-Wformat-overflow=]
sprintf(str, "%s\" style=\"%s", rowstyle, display);
^~ ~~~~~~~
src/elogd.c:17743:10: note: ‘sprintf’ output between 10 and 1588 bytes into a destination of size 1500
sprintf(str, "%s\" style=\"%s", rowstyle, display);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
src/elogd.c:17841:33: warning: ‘%s’ directive writing up to 255 bytes into a region of size 253 [-Wformat-overflow=]
sprintf(ref, "../%s/%s/%s", lbs->name, str, attachment[i] + 14);
^~
src/elogd.c:17841:16: note: ‘sprintf’ output 6 or more bytes (assuming 1760) into a destination of size 256
sprintf(ref, "../%s/%s/%s", lbs->name, str, attachment[i] + 14);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
src/elogd.c:17976:46: warning: ‘%s’ directive writing up to 1499 bytes into a region of size between 1412 and 1491 [-Wformat-overflow=]
sprintf(str, "%s\" style=\"%s", rowstyle, display);
^~ ~~~~~~~
src/elogd.c:17976:19: note: ‘sprintf’ output between 10 and 1588 bytes into a destination of size 1500
sprintf(str, "%s\" style=\"%s", rowstyle, display);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
src/elogd.c:18201:36: warning: ‘%s’ directive writing up to 255 bytes into a region of size 253 [-Wformat-overflow=]
sprintf(ref, "../%s/%s/%s", lbs->name, str, attachment[i] + 14);
^~
src/elogd.c:18201:19: note: ‘sprintf’ output 6 or more bytes (assuming 1760) into a destination of size 256
sprintf(ref, "../%s/%s/%s", lbs->name, str, attachment[i] + 14);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
src/elogd.c:18323:33: warning: ‘%s’ directive writing up to 255 bytes into a region of size 253 [-Wformat-overflow=]
sprintf(ref, "../%s/%s/%s", lbs->name, str, attachment[i] + 14);
^~
src/elogd.c:18323:16: note: ‘sprintf’ output 6 or more bytes (assuming 1760) into a destination of size 256
sprintf(ref, "../%s/%s/%s", lbs->name, str, attachment[i] + 14);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
src/elogd.c:18381:30: warning: ‘%s’ directive writing up to 255 bytes into a region of size 253 [-Wformat-overflow=]
sprintf(ref, "../%s/%s/%s", lbs->name, str, attachment[index] + 14);
^~
src/elogd.c:18381:13: note: ‘sprintf’ output 6 or more bytes (assuming 1760) into a destination of size 256
sprintf(ref, "../%s/%s/%s", lbs->name, str, attachment[index] + 14);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
src/elogd.c: In function ‘show_rss_feed’:
src/elogd.c:19817:31: warning: ‘%s’ directive writing up to 255 bytes into a region of size 249 [-Wformat-overflow=]
sprintf(url, "http://%s", host_name);
^~ ~~~~~~~~~
src/elogd.c:19817:10: note: ‘sprintf’ output between 8 and 263 bytes into a destination of size 256
sprintf(url, "http://%s", host_name);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
src/elogd.c:19815:32: warning: ‘%s’ directive writing up to 255 bytes into a region of size 248 [-Wformat-overflow=]
sprintf(url, "https://%s", host_name);
^~ ~~~~~~~~~
src/elogd.c:19815:10: note: ‘sprintf’ output between 9 and 264 bytes into a destination of size 256
sprintf(url, "https://%s", host_name);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
src/elogd.c:19902:41: warning: ‘%s’ directive output may be truncated writing up to 255 bytes into a region of size 79 [-Wformat-truncation=]
snprintf(date, sizeof(date) - 1, "%s %+03d%02d", str, (int) (offset / 3600), (int) ((abs((int) offset)
^~ ~~~
src/elogd.c:19902:40: note: directive argument in the range [-596523, 596523]
snprintf(date, sizeof(date) - 1, "%s %+03d%02d", str, (int) (offset / 3600), (int) ((abs((int) offset)
^~~~~~~~~~~~~~
src/elogd.c:19902:40: note: directive argument in the range [0, 59]
src/elogd.c:19902:7: note: ‘snprintf’ output between 7 and 266 bytes into a destination of size 79
snprintf(date, sizeof(date) - 1, "%s %+03d%02d", str, (int) (offset / 3600), (int) ((abs((int) offset)
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
/ 60) % 60));
~~~~~~~~~~~~
src/elogd.c: In function ‘show_find_form’:
src/elogd.c:12538:40: warning: ‘$’ directive writing 1 byte into a region of size between 0 and 1499 [-Wformat-overflow=]
sprintf(whole_attr, "^%s$", str);
^
src/elogd.c:12538:16: note: ‘sprintf’ output between 3 and 1502 bytes into a destination of size 1500
sprintf(whole_attr, "^%s$", str);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
src/elogd.c:12496:43: warning: ‘%s’ directive writing up to 1499 bytes into a region of size 1487 [-Wformat-overflow=]
sprintf(str, "Icon comment %s", option);
^~ ~~~~~~
src/elogd.c:12496:16: note: ‘sprintf’ output between 14 and 1513 bytes into a destination of size 1500
sprintf(str, "Icon comment %s", option);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
src/elogd.c: In function ‘submit_message’:
src/elogd.c:16089:7: warning: ‘strncpy’ specified bound 256 equals destination size [-Wstringop-truncation]
strncpy(str, strstr(response, "Error: Attribute") + 20, sizeof(str));
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
src/elogd.c: In function ‘submit_config’:
src/elogd.c:16368:7: warning: ‘strncpy’ specified bound 256 equals destination size [-Wstringop-truncation]
strncpy(str, strstr(response, "Error: Attribute") + 20, sizeof(str));
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
src/elogd.c: In function ‘synchronize_logbook’:
src/elogd.c:16859:45: warning: ‘%s’ directive writing up to 255 bytes into a region of size 244 [-Wformat-overflow=]
sprintf(loc_ref, "<a href=\".\">%s</a>", lbs->name);
^~
src/elogd.c:16859:13: note: ‘sprintf’ output between 17 and 272 bytes into a destination of size 256
sprintf(loc_ref, "<a href=\".\">%s</a>", lbs->name);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
src/elogd.c:16857:41: warning: ‘%s’ directive writing up to 255 bytes into a region of size 247 [-Wformat-overflow=]
sprintf(loc_ref, "<a href=\"%s/\">%s</a>", lbs->name_enc, lbs->name);
^~
src/elogd.c:16857:13: note: ‘sprintf’ output between 17 and 527 bytes into a destination of size 256
sprintf(loc_ref, "<a href=\"%s/\">%s</a>", lbs->name_enc, lbs->name);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
src/elogd.c:16855:44: warning: ‘%s’ directive writing up to 255 bytes into a region of size 244 [-Wformat-overflow=]
sprintf(loc_ref, "<a href=\"../%s/\">%s</a>", lbs->name_enc, lbs->name);
^~
src/elogd.c:16855:13: note: ‘sprintf’ output between 20 and 530 bytes into a destination of size 256
sprintf(loc_ref, "<a href=\"../%s/\">%s</a>", lbs->name_enc, lbs->name);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
src/elogd.c:17181:50: warning: ‘%s’ directive writing up to 255 bytes into a region of size 247 [-Wformat-overflow=]
sprintf(loc_ref, "<a href=\"%s/%d\">%s</a>", lbs->name_enc, message_id, loc("local"));
^~
src/elogd.c:17181:22: note: ‘sprintf’ output 18 or more bytes (assuming 273) into a destination of size 256
sprintf(loc_ref, "<a href=\"%s/%d\">%s</a>", lbs->name_enc, message_id, loc("local"));
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
src/elogd.c:17179:53: warning: ‘%s’ directive writing up to 255 bytes into a region of size 244 [-Wformat-overflow=]
sprintf(loc_ref, "<a href=\"../%s/%d\">%s</a>", lbs->name_enc, message_id, loc("local"));
^~
src/elogd.c:17179:22: note: ‘sprintf’ output 21 or more bytes (assuming 276) into a destination of size 256
sprintf(loc_ref, "<a href=\"../%s/%d\">%s</a>", lbs->name_enc, message_id, loc("local"));
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
src/elogd.c:17185:54: warning: ‘%s’ directive writing up to 1999 bytes into a region of size 240 [-Wformat-overflow=]
sprintf(rem_ref, "<a href=\"http://%s%d\">%s</a>", str, message_id, loc("remote"));
^~ ~~~
src/elogd.c:17185:19: note: ‘sprintf’ output 24 or more bytes (assuming 2023) into a destination of size 256
sprintf(rem_ref, "<a href=\"http://%s%d\">%s</a>", str, message_id, loc("remote"));
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
src/elogd.c:17256:50: warning: ‘%s’ directive writing up to 255 bytes into a region of size 247 [-Wformat-overflow=]
sprintf(loc_ref, "<a href=\"%s/%d\">%s</a>", lbs->name_enc, message_id,
^~
src/elogd.c:17256:22: note: ‘sprintf’ output 18 or more bytes (assuming 273) into a destination of size 256
sprintf(loc_ref, "<a href=\"%s/%d\">%s</a>", lbs->name_enc, message_id,
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
loc("Local entry"));
~~~~~~~~~~~~~~~~~~~
src/elogd.c:17254:53: warning: ‘%s’ directive writing up to 255 bytes into a region of size 244 [-Wformat-overflow=]
sprintf(loc_ref, "<a href=\"../%s/%d\">%s</a>", lbs->name_enc, message_id, loc("local"));
^~
src/elogd.c:17254:22: note: ‘sprintf’ output 21 or more bytes (assuming 276) into a destination of size 256
sprintf(loc_ref, "<a href=\"../%s/%d\">%s</a>", lbs->name_enc, message_id, loc("local"));
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
src/elogd.c:16825:33: warning: ‘%s’ directive writing up to 1999 bytes into a region of size 992 [-Wformat-overflow=]
sprintf(line, "MIRROR: %s", str);
^~
src/elogd.c:17044:31:
mprint(lbs, mode, str);
~~~
src/elogd.c:16825:10: note: ‘sprintf’ output between 9 and 2008 bytes into a destination of size 1000
sprintf(line, "MIRROR: %s", str);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
src/elogd.c:17501:60: warning: ‘%s’ directive writing up to 1999 bytes into a region of size 240 [-Wformat-overflow=]
sprintf(rem_ref, "<a href=\"http://%s%d\">%s</a>", str, message_id,
^~ ~~~
src/elogd.c:17501:25: note: ‘sprintf’ output 24 or more bytes (assuming 2023) into a destination of size 256
sprintf(rem_ref, "<a href=\"http://%s%d\">%s</a>", str, message_id,
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
loc("Remote entry"));
~~~~~~~~~~~~~~~~~~~~
src/elogd.c: In function ‘retrieve_email_from’:
src/elogd.c:3539:44: warning: ‘%s’ directive writing up to 255 bytes into a region of size 245 [-Wformat-overflow=]
sprintf(email_from_name, "ELog <ELog@%s>", host_name);
^~ ~~~~~~~~~
src/elogd.c:3539:7: note: ‘sprintf’ output between 13 and 268 bytes into a destination of size 256
sprintf(email_from_name, "ELog <ELog@%s>", host_name);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
src/elogd.c:3540:34: warning: ‘%s’ directive writing up to 255 bytes into a region of size 250 [-Wformat-overflow=]
sprintf(email_from, "<ELog@%s>", host_name);
^~ ~~~~~~~~~
src/elogd.c:3540:7: note: ‘sprintf’ output between 8 and 263 bytes into a destination of size 256
sprintf(email_from, "<ELog@%s>", host_name);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
src/elogd.c:25877:41: warning: ‘%s’ directive writing up to 255 bytes into a region of size 239 [-Wformat-overflow=]
src/elogd.c:3560:53:
get_user_line(lbs, login_name, NULL, NULL, email_from, NULL, NULL, NULL);
~~~~~~~~~~
src/elogd.c:25877:41:
sprintf(str, "/list/user[email=%s]", email);
^~
src/elogd.c:25877:10: note: ‘sprintf’ output between 19 and 274 bytes into a destination of size 256
sprintf(str, "/list/user[email=%s]", email);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
src/elogd.c:25873:40: warning: ‘%s’ directive writing up to 255 bytes into a region of size 240 [-Wformat-overflow=]
src/elogd.c:3560:29:
get_user_line(lbs, login_name, NULL, NULL, email_from, NULL, NULL, NULL);
~~~~~~~~~~
src/elogd.c:25873:40:
sprintf(str, "/list/user[name=%s]", user);
^~
src/elogd.c:25873:10: note: ‘sprintf’ output between 18 and 273 bytes into a destination of size 256
sprintf(str, "/list/user[name=%s]", user);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
src/elogd.c:3561:38: warning: ‘ <’ directive writing 2 bytes into a region of size between 1 and 256 [-Wformat-overflow=]
sprintf(email_from_name, "%s <%s>", login_name, email_from);
^~
src/elogd.c:3561:10: note: ‘sprintf’ output between 4 and 514 bytes into a destination of size 256
sprintf(email_from_name, "%s <%s>", login_name, email_from);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
src/elogd.c: In function ‘save_user_config’:
src/elogd.c:13400:29: warning: ‘%s’ directive writing up to 255 bytes into a region of size 254 [-Wformat-overflow=]
sprintf(str, "%s \"%s\" %s", loc("Login name"), user_enc, loc("exists already"));
^~ ~~~~~~~~
src/elogd.c:13400:10: note: ‘sprintf’ output 5 or more bytes (assuming 260) into a destination of size 256
sprintf(str, "%s \"%s\" %s", loc("Login name"), user_enc, loc("exists already"));
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
src/elogd.c:13425:34: warning: ‘%s’ directive writing up to 255 bytes into a region of size 240 [-Wformat-overflow=]
sprintf(str, "/list/user[name=%s]", user_enc);
^~ ~~~~~~~~
src/elogd.c:13425:4: note: ‘sprintf’ output between 18 and 273 bytes into a destination of size 256
sprintf(str, "/list/user[name=%s]", user_enc);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
src/elogd.c:13519:40: warning: ‘%s’ directive writing up to 255 bytes into a region of size 249 [-Wformat-overflow=]
sprintf(url, "http://%s:%d/", http_host, elog_tcp_port);
^~ ~~~~~~~~~
src/elogd.c:13519:19: note: ‘sprintf’ output between 11 and 276 bytes into a destination of size 256
sprintf(url, "http://%s:%d/", http_host, elog_tcp_port);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
src/elogd.c:13517:41: warning: ‘%s’ directive writing up to 255 bytes into a region of size 248 [-Wformat-overflow=]
sprintf(url, "https://%s:%d/", http_host, elog_tcp_port);
^~ ~~~~~~~~~
src/elogd.c:13517:19: note: ‘sprintf’ output between 12 and 277 bytes into a destination of size 256
sprintf(url, "https://%s:%d/", http_host, elog_tcp_port);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
src/elogd.c:13514:40: warning: ‘%s’ directive writing up to 255 bytes into a region of size 249 [-Wformat-overflow=]
sprintf(url, "http://%s/", http_host);
^~ ~~~~~~~~~
src/elogd.c:13514:19: note: ‘sprintf’ output between 9 and 264 bytes into a destination of size 256
sprintf(url, "http://%s/", http_host);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
src/elogd.c:13512:41: warning: ‘%s’ directive writing up to 255 bytes into a region of size 248 [-Wformat-overflow=]
sprintf(url, "https://%s/", http_host);
^~ ~~~~~~~~~
src/elogd.c:13512:19: note: ‘sprintf’ output between 10 and 265 bytes into a destination of size 256
sprintf(url, "https://%s/", http_host);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
src/elogd.c:13705:30: warning: ‘%s’ directive writing up to 255 bytes into a region of size 253 [-Wformat-overflow=]
sprintf(str, "../%s/", lbs->name_enc);
^~
src/elogd.c:13705:13: note: ‘sprintf’ output between 5 and 260 bytes into a destination of size 256
sprintf(str, "../%s/", lbs->name_enc);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
src/elogd.c: In function ‘activate_user’:
src/elogd.c:25877:41: warning: ‘%s’ directive writing up to 255 bytes into a region of size 239 [-Wformat-overflow=]
src/elogd.c:14075:46:
get_user_line(lbs, user_name, NULL, NULL, user_email, NULL, NULL, &inactive);
~~~~~~~~~~
src/elogd.c:25877:41:
sprintf(str, "/list/user[email=%s]", email);
^~
src/elogd.c:25877:10: note: ‘sprintf’ output between 19 and 274 bytes into a destination of size 256
sprintf(str, "/list/user[email=%s]", email);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
src/elogd.c:14111:40: warning: ‘%s’ directive writing up to 255 bytes into a region of size 249 [-Wformat-overflow=]
sprintf(url, "http://%s:%d/", http_host, elog_tcp_port);
^~ ~~~~~~~~~
src/elogd.c:14111:19: note: ‘sprintf’ output between 11 and 276 bytes into a destination of size 256
sprintf(url, "http://%s:%d/", http_host, elog_tcp_port);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
src/elogd.c:14109:41: warning: ‘%s’ directive writing up to 255 bytes into a region of size 248 [-Wformat-overflow=]
sprintf(url, "https://%s:%d/", http_host, elog_tcp_port);
^~ ~~~~~~~~~
src/elogd.c:14109:19: note: ‘sprintf’ output between 12 and 277 bytes into a destination of size 256
sprintf(url, "https://%s:%d/", http_host, elog_tcp_port);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
src/elogd.c:14106:40: warning: ‘%s’ directive writing up to 255 bytes into a region of size 249 [-Wformat-overflow=]
sprintf(url, "http://%s/", http_host);
^~ ~~~~~~~~~
src/elogd.c:14106:19: note: ‘sprintf’ output between 9 and 264 bytes into a destination of size 256
sprintf(url, "http://%s/", http_host);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
src/elogd.c:14104:41: warning: ‘%s’ directive writing up to 255 bytes into a region of size 248 [-Wformat-overflow=]
sprintf(url, "https://%s/", http_host);
^~ ~~~~~~~~~
src/elogd.c:14104:19: note: ‘sprintf’ output between 10 and 265 bytes into a destination of size 256
sprintf(url, "https://%s/", http_host);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
src/elogd.c: In function ‘show_forgot_pwd_page’:
src/elogd.c:25877:41: warning: ‘%s’ directive writing up to 255 bytes into a region of size 239 [-Wformat-overflow=]
src/elogd.c:14173:58:
get_user_line(lbs, login_name, NULL, full_name, user_email, NULL, NULL, NULL);
~~~~~~~~~~
src/elogd.c:25877:41:
sprintf(str, "/list/user[email=%s]", email);
^~
src/elogd.c:25877:10: note: ‘sprintf’ output between 19 and 274 bytes into a destination of size 256
sprintf(str, "/list/user[email=%s]", email);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
src/elogd.c:25873:40: warning: ‘%s’ directive writing up to 255 bytes into a region of size 240 [-Wformat-overflow=]
src/elogd.c:14173:29:
get_user_line(lbs, login_name, NULL, full_name, user_email, NULL, NULL, NULL);
~~~~~~~~~~
src/elogd.c:25873:40:
sprintf(str, "/list/user[name=%s]", user);
^~
src/elogd.c:25873:10: note: ‘sprintf’ output between 18 and 273 bytes into a destination of size 256
sprintf(str, "/list/user[name=%s]", user);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
src/elogd.c:14221:44: warning: ‘%s’ directive writing up to 255 bytes into a region of size 243 [-Wformat-overflow=]
sprintf(redir, "?cmd=%s&oldpwd=%s", loc("Change password"), pwd);
^~ ~~~
src/elogd.c:14221:13: note: ‘sprintf’ output 14 or more bytes (assuming 269) into a destination of size 256
sprintf(redir, "?cmd=%s&oldpwd=%s", loc("Change password"), pwd);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
src/elogd.c:14225:34: warning: ‘%s’ directive writing up to 999 bytes into a region of size 993 [-Wformat-overflow=]
sprintf(str, "?redir=%s&uname=%s&upassword=%s", str2, login_name, pwd);
^~ ~~~~
src/elogd.c:14225:13: note: ‘sprintf’ output between 26 and 1535 bytes into a destination of size 1000
sprintf(str, "?redir=%s&uname=%s&upassword=%s", str2, login_name, pwd);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
src/elogd.c: In function ‘show_change_pwd_page’:
src/elogd.c:9011:53: warning: ‘%s’ directive writing up to 255 bytes into a region of size 237 [-Wformat-overflow=]
sprintf(str, "?cmd=%s&config=%s&fail=%s", loc("Change password"), getparam("unm"), error_str);
^~ ~~~~~~~~~
src/elogd.c:9011:16: note: ‘sprintf’ output 20 or more bytes (assuming 275) into a destination of size 256
sprintf(str, "?cmd=%s&config=%s&fail=%s", loc("Change password"), getparam("unm"), error_str);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
src/elogd.c:9001:47: warning: ‘%s’ directive writing up to 255 bytes into a region of size 241 [-Wformat-overflow=]
sprintf(str, "?cmd=%s&cfg_user=%s", loc("Config"), config);
^~ ~~~~~~
src/elogd.c:9001:16: note: ‘sprintf’ output 16 or more bytes (assuming 271) into a destination of size 256
sprintf(str, "?cmd=%s&cfg_user=%s", loc("Config"), config);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
src/elogd.c: In function ‘show_edit_form’:
src/elogd.c:10047:33: warning: ‘%s’ directive writing up to 255 bytes into a region of size 251 [-Wformat-overflow=]
sprintf(page_title, "ELOG %s", lbs->name);
^~
src/elogd.c:10047:7: note: ‘sprintf’ output between 6 and 261 bytes into a destination of size 256
sprintf(page_title, "ELOG %s", lbs->name);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
src/elogd.c:10721:35: warning: ‘%s’ directive writing up to 9999 bytes into a region of size 248 [-Wformat-overflow=]
sprintf(title, " title=\"%s\"", comment);
^~ ~~~~~~~
src/elogd.c:10721:10: note: ‘sprintf’ output between 10 and 10009 bytes into a destination of size 256
sprintf(title, " title=\"%s\"", comment);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
src/elogd.c:11189:52: warning: ‘%s’ directive writing up to 9999 bytes into a region of size 9992 [-Wformat-overflow=]
sprintf(tooltip, " title=\"%s\"", comment);
^~ ~~~~~~~
src/elogd.c:11189:25: note: ‘sprintf’ output between 10 and 10009 bytes into a destination of size 10000
sprintf(tooltip, " title=\"%s\"", comment);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
src/elogd.c:11138:52: warning: ‘%s’ directive writing up to 9999 bytes into a region of size 9992 [-Wformat-overflow=]
sprintf(tooltip, " title=\"%s\"", comment);
^~ ~~~~~~~
src/elogd.c:11138:25: note: ‘sprintf’ output between 10 and 10009 bytes into a destination of size 10000
sprintf(tooltip, " title=\"%s\"", comment);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
src/elogd.c:11143:52: warning: ‘%s’ directive writing up to 9999 bytes into a region of size 9992 [-Wformat-overflow=]
sprintf(tooltip, " title=\"%s\"", comment);
^~ ~~~~~~~
src/elogd.c:11143:25: note: ‘sprintf’ output between 10 and 10009 bytes into a destination of size 10000
sprintf(tooltip, " title=\"%s\"", comment);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
src/elogd.c:11958:41: warning: ‘ -format '’ directive writing 10 bytes into a region of size between 1 and 256 [-Wformat-overflow=]
sprintf(cmd, "%s -format '%%wx%%h' '%s'", _identify_cmd, file_name);
^~~~~~~~~~
src/elogd.c:11958:25: note: ‘sprintf’ output between 20 and 530 bytes into a destination of size 256
sprintf(cmd, "%s -format '%%wx%%h' '%s'", _identify_cmd, file_name);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
src/elogd.c:11956:41: warning: ‘ -format '’ directive writing 10 bytes into a region of size between 1 and 256 [-Wformat-overflow=]
sprintf(cmd, "%s -format '%%wx%%h' '%s[0]'", _identify_cmd, file_name);
^~~~~~~~~~
src/elogd.c:11956:25: note: ‘sprintf’ output between 23 and 533 bytes into a destination of size 256
sprintf(cmd, "%s -format '%%wx%%h' '%s[0]'", _identify_cmd, file_name);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
src/elogd.c:12022:42: warning: ‘%s’ directive writing up to 2999 bytes into a region of size 256 [-Wformat-overflow=]
sprintf(ref, "%s/%s", str, file_enc);
^~ ~~~
src/elogd.c:12022:28: note: ‘sprintf’ output between 2 and 3256 bytes into a destination of size 256
sprintf(ref, "%s/%s", str, file_enc);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
src/elogd.c:12008:48: warning: ‘%s’ directive writing up to 2999 bytes into a region of size 256 [-Wformat-overflow=]
sprintf(ref, "%s/%s?thumb=1", str, file_enc);
^~ ~~~
src/elogd.c:12008:34: note: ‘sprintf’ output between 10 and 3264 bytes into a destination of size 256
sprintf(ref, "%s/%s?thumb=1", str, file_enc);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
src/elogd.c:11991:42: warning: ‘%s’ directive writing up to 2999 bytes into a region of size 256 [-Wformat-overflow=]
sprintf(ref, "%s/%s?thumb=1", str, file_enc);
^~ ~~~
src/elogd.c:11991:28: note: ‘sprintf’ output between 10 and 3264 bytes into a destination of size 256
sprintf(ref, "%s/%s?thumb=1", str, file_enc);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
src/elogd.c: In function ‘show_elog_list’:
src/elogd.c:20242:39: warning: ‘%s’ directive writing up to 79 bytes into a region of size 73 [-Wformat-overflow=]
sprintf(mode_cookie, "elmode=%s", mode);
^~ ~~~~
src/elogd.c:20242:10: note: ‘sprintf’ output between 8 and 87 bytes into a destination of size 80
sprintf(mode_cookie, "elmode=%s", mode);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
src/elogd.c:21574:43: warning: ‘%s’ directive writing up to 1499 bytes into a region of size 249 [-Wformat-overflow=]
sprintf(ref, "?rsort=%s", str);
^~ ~~~
src/elogd.c:21574:22: note: ‘sprintf’ output between 8 and 1507 bytes into a destination of size 256
sprintf(ref, "?rsort=%s", str);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
src/elogd.c:21576:42: warning: ‘%s’ directive writing up to 1499 bytes into a region of size 250 [-Wformat-overflow=]
sprintf(ref, "?sort=%s", str);
^~ ~~~
src/elogd.c:21576:22: note: ‘sprintf’ output between 7 and 1506 bytes into a destination of size 256
sprintf(ref, "?sort=%s", str);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~
src/elogd.c:21592:38: warning: ‘%s’ directive writing up to 1499 bytes into a region of size 1493 [-Wformat-overflow=]
sprintf(str, "title=\"%s\"", comment);
^~ ~~~~~~~
src/elogd.c:21592:16: note: ‘sprintf’ output between 9 and 1508 bytes into a destination of size 1500
sprintf(str, "title=\"%s\"", comment);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
src/elogd.c:20066:31: warning: ‘3D’ directive writing 2 bytes into a region of size between 0 and 1499 [-Wformat-overflow=]
sprintf(str, "%s%%3D", param);
^~
src/elogd.c:20066:13: note: ‘sprintf’ output between 4 and 1503 bytes into a destination of size 1500
sprintf(str, "%s%%3D", param);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~
src/elogd.c:20089:31: warning: ‘3D’ directive writing 2 bytes into a region of size between 0 and 1499 [-Wformat-overflow=]
sprintf(str, "%s%%3D", param);
^~
src/elogd.c:20089:13: note: ‘sprintf’ output between 4 and 1503 bytes into a destination of size 1500
sprintf(str, "%s%%3D", param);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~
src/elogd.c: In function ‘show_elog_entry’:
src/elogd.c:25284:33: warning: ‘%s’ directive writing up to 2999 bytes into a region of size 256 [-Wformat-overflow=]
sprintf(ref, "%s/%s", str, file_enc);
^~ ~~~
src/elogd.c:25284:19: note: ‘sprintf’ output between 2 and 3256 bytes into a destination of size 256
sprintf(ref, "%s/%s", str, file_enc);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
src/elogd.c:25278:43: warning: ‘%s’ directive writing up to 255 bytes into a region of size between 246 and 247 [-Wformat-overflow=]
sprintf(ref, "cid:att%d@%s", index, domain);
^~ ~~~~~~
src/elogd.c:25278:19: note: ‘sprintf’ output between 10 and 266 bytes into a destination of size 256
sprintf(ref, "cid:att%d@%s", index, domain);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
src/elogd.c: In function ‘compose_email’:
src/elogd.c:22630:18: warning: ‘%s’ directive writing up to 1599 bytes into a region of size 256 [-Wformat-overflow=]
sprintf(url, "%s%d", str, message_id);
^~ ~~~
src/elogd.c:22630:4: note: ‘sprintf’ output between 2 and 1611 bytes into a destination of size 256
sprintf(url, "%s%d", str, message_id);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
src/elogd.c: In function ‘submit_elog’:
src/elogd.c:23108:33: warning: ‘%d’ directive writing between 1 and 3 bytes into a region of size between 0 and 1499 [-Wformat-overflow=]
sprintf(str, "%s_%d", ua, j);
^~
src/elogd.c:23108:29: note: directive argument in the range [0, 100]
sprintf(str, "%s_%d", ua, j);
^~~~~~~
src/elogd.c:23108:16: note: ‘sprintf’ output between 3 and 1504 bytes into a destination of size 1500
sprintf(str, "%s_%d", ua, j);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~
src/elogd.c:23269:33: warning: ‘%d’ directive writing between 1 and 3 bytes into a region of size between 0 and 1499 [-Wformat-overflow=]
sprintf(str, "%s_%d", ua, j);
^~
src/elogd.c:23269:29: note: directive argument in the range [0, 100]
sprintf(str, "%s_%d", ua, j);
^~~~~~~
src/elogd.c:23269:16: note: ‘sprintf’ output between 3 and 1504 bytes into a destination of size 1500
sprintf(str, "%s_%d", ua, j);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~
src/elogd.c:23647:34: warning: ‘%d’ directive writing between 1 and 10 bytes into a region of size between 0 and 1499 [-Wformat-overflow=]
sprintf(str2, "%s_%d", ua, mindex);
^~
src/elogd.c:23647:30: note: directive argument in the range [0, 2147483647]
sprintf(str2, "%s_%d", ua, mindex);
^~~~~~~
src/elogd.c:23647:16: note: ‘sprintf’ output between 3 and 1511 bytes into a destination of size 1500
sprintf(str2, "%s_%d", ua, mindex);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
src/elogd.c: In function ‘do_self_register’:
src/elogd.c:26908:27: warning: ‘%s’ directive writing up to 255 bytes into a region of size 253 [-Wformat-overflow=]
sprintf(str, "../%s/", lbs->name_enc);
^~
src/elogd.c:26908:10: note: ‘sprintf’ output between 5 and 260 bytes into a destination of size 256
sprintf(str, "../%s/", lbs->name_enc);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
src/elogd.c: In function ‘show_uploader_finished’:
src/elogd.c:27149:24: warning: ‘%s’ directive writing up to 255 bytes into a region of size between 0 and 255 [-Wformat-overflow=]
sprintf(ref, "%s/%s?lb=%s", str, file_enc, lbs->name_enc);
^~ ~~~~~~~~
src/elogd.c:27149:7: note: ‘sprintf’ output between 6 and 771 bytes into a destination of size 256
sprintf(ref, "%s/%s?lb=%s", str, file_enc, lbs->name_enc);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
src/elogd.c:27150:30: warning: ‘%s’ directive writing up to 255 bytes into a region of size between 0 and 255 [-Wformat-overflow=]
sprintf(ref_thumb, "%s/%s?lb=%s&thumb=1", str, file_enc, lbs->name_enc);
^~ ~~~~~~~~
src/elogd.c:27150:7: note: ‘sprintf’ output between 14 and 779 bytes into a destination of size 256
sprintf(ref_thumb, "%s/%s?lb=%s&thumb=1", str, file_enc, lbs->name_enc);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
src/elogd.c: In function ‘interprete’:
src/elogd.c:28378:27: warning: ‘%s’ directive writing up to 1499 bytes into a region of size 1495 [-Wformat-overflow=]
sprintf(str1, "?cmd=%s", str);
^~ ~~~
src/elogd.c:28378:7: note: ‘sprintf’ output between 6 and 1505 bytes into a destination of size 1500
sprintf(str1, "?cmd=%s", str);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~
src/elogd.c:28382:27: warning: ‘%s’ directive writing up to 1499 bytes into a region of size 1495 [-Wformat-overflow=]
sprintf(str2, "?cmd=%s", str);
^~ ~~~
src/elogd.c:28382:7: note: ‘sprintf’ output between 6 and 1505 bytes into a destination of size 1500
sprintf(str2, "?cmd=%s", str);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~
src/elogd.c:28177:31: warning: ‘%s’ directive writing up to 1499 bytes into a region of size 1495 [-Wformat-overflow=]
sprintf(str, "%s: <b>%s</b>", loc("Invalid URL"), str2);
^~ ~~~~
src/elogd.c:28177:10: note: ‘sprintf’ output 10 or more bytes (assuming 1509) into a destination of size 1500
sprintf(str, "%s: <b>%s</b>", loc("Invalid URL"), str2);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
src/elogd.c:27649:28: warning: ‘%s’ directive writing up to 1499 bytes into a region of size 1495 [-Wformat-overflow=]
sprintf(str, "%s: <b>%s</b>", loc("Invalid URL"), str2);
^~ ~~~~
src/elogd.c:27649:7: note: ‘sprintf’ output 10 or more bytes (assuming 1509) into a destination of size 1500
sprintf(str, "%s: <b>%s</b>", loc("Invalid URL"), str2);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
src/elogd.c: In function ‘decode_post’:
src/elogd.c:28615:54: warning: ‘%s’ directive writing up to 1499 bytes into a region of size 1483 [-Wformat-overflow=]
sprintf(str, "Error: Filename \"%s\" contains invalid character", str2);
^~ ~~~~
src/elogd.c:28615:22: note: ‘sprintf’ output between 46 and 1545 bytes into a destination of size 1500
sprintf(str, "Error: Filename \"%s\" contains invalid character", str2);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
gcc -O3 -funroll-loops -fomit-frame-pointer -W -Wall -Wno-deprecated-declarations -Imxml -DHAVE_SSL -o elconv src/elconv.c -lssl
src/elconv.c: In function ‘ss_file_find’:
src/elconv.c:233:10: warning: ‘strncpy’ output truncated before terminating nul copying as many bytes from a string as its length [-Wstringop-truncation]
strncpy(*plist + (i * MAX_PATH_LENGTH), dp->d_name, strlen(dp->d_name));
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
src/elconv.c: In function ‘el_search_message’:
src/elconv.c:325:32: warning: ‘%02d’ directive writing between 2 and 3 bytes into a region of size between 1 and 256 [-Wformat-overflow=]
sprintf(file_name, "%s%02d%02d%02d.log", dir, tms->tm_year % 100, tms->tm_mon + 1, tms->tm_mday);
^~~~
src/elconv.c:325:29: note: directive argument in the range [-99, 99]
sprintf(file_name, "%s%02d%02d%02d.log", dir, tms->tm_year % 100, tms->tm_mon + 1, tms->tm_mday);
^~~~~~~~~~~~~~~~~~~~
src/elconv.c:325:29: note: directive argument in the range [-2147483647, 2147483647]
src/elconv.c:325:10: note: ‘sprintf’ output between 11 and 285 bytes into a destination of size 256
sprintf(file_name, "%s%02d%02d%02d.log", dir, tms->tm_year % 100, tms->tm_mon + 1, tms->tm_mday);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
src/elconv.c:419:32: warning: ‘%06d’ directive writing 6 bytes into a region of size between 1 and 256 [-Wformat-overflow=]
sprintf(file_name, "%s%06d.log", dir, max % 1000000);
^~~~
src/elconv.c:419:29: note: directive argument in the range [0, 999999]
sprintf(file_name, "%s%06d.log", dir, max % 1000000);
^~~~~~~~~~~~
src/elconv.c:419:10: note: ‘sprintf’ output between 11 and 266 bytes into a destination of size 256
sprintf(file_name, "%s%06d.log", dir, max % 1000000);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
src/elconv.c:388:32: warning: ‘%06d’ directive writing between 6 and 7 bytes into a region of size between 1 and 256 [-Wformat-overflow=]
sprintf(file_name, "%s%06d.log", dir, min % 1000000);
^~~~
src/elconv.c:388:29: note: directive argument in the range [-999999, 999999]
sprintf(file_name, "%s%06d.log", dir, min % 1000000);
^~~~~~~~~~~~
src/elconv.c:388:10: note: ‘sprintf’ output between 11 and 267 bytes into a destination of size 256
sprintf(file_name, "%s%06d.log", dir, min % 1000000);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
src/elconv.c: In function ‘el_submit’:
src/elconv.c:626:38: warning: ‘%02d’ directive writing between 2 and 3 bytes into a region of size between 1 and 256 [-Wformat-overflow=]
sprintf(file_name, "%s%02d%02d%02d_%02d%02d%02d_%s", dir,
^~~~
src/elconv.c:626:35: note: directive argument in the range [-99, 99]
sprintf(file_name, "%s%02d%02d%02d_%02d%02d%02d_%s", dir,
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
src/elconv.c:626:35: note: directive argument in the range [-2147483647, 2147483647]
src/elconv.c:626:16: note: ‘sprintf’ output between 15 and 571 bytes into a destination of size 256
sprintf(file_name, "%s%02d%02d%02d_%02d%02d%02d_%s", dir,
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
tms->tm_year % 100, tms->tm_mon + 1, tms->tm_mday, tms->tm_hour,
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
tms->tm_min, tms->tm_sec, str);
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
src/elconv.c:690:29: warning: ‘%02d’ directive writing between 2 and 3 bytes into a region of size between 1 and 256 [-Wformat-overflow=]
sprintf(file_name, "%s%02d%02d%02d.log", dir, tms->tm_year % 100, tms->tm_mon + 1, tms->tm_mday);
^~~~
src/elconv.c:690:26: note: directive argument in the range [-99, 99]
sprintf(file_name, "%s%02d%02d%02d.log", dir, tms->tm_year % 100, tms->tm_mon + 1, tms->tm_mday);
^~~~~~~~~~~~~~~~~~~~
src/elconv.c:690:26: note: directive argument in the range [-2147483647, 2147483647]
src/elconv.c:690:7: note: ‘sprintf’ output between 11 and 285 bytes into a destination of size 256
sprintf(file_name, "%s%02d%02d%02d.log", dir, tms->tm_year % 100, tms->tm_mon + 1, tms->tm_mday);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
src/elconv.c:656:29: warning: ‘%s’ directive writing up to 255 bytes into a region of size between 1 and 256 [-Wformat-overflow=]
sprintf(file_name, "%s%s.log", dir, str);
^~ ~~~
src/elconv.c:656:7: note: ‘sprintf’ output between 5 and 515 bytes into a destination of size 256
sprintf(file_name, "%s%s.log", dir, str);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
src/elconv.c: In function ‘scan_messages’:
src/elconv.c:981:29: warning: ‘%s’ directive writing up to 255 bytes into a region of size between 1 and 256 [-Wformat-overflow=]
sprintf(file_name, "%s%sa.log", data_dir, str);
^~ ~~~
src/elconv.c:981:7: note: ‘sprintf’ output between 6 and 516 bytes into a destination of size 256
sprintf(file_name, "%s%sa.log", data_dir, str);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
| Andreas Luedeke wrote: |
|
Stefan said "code is commited": that means you can download the latest version from https://bitbucket.org/ritt/elog, as described in https://elog.psi.ch/elog/download.html, and then compile it. Clear now?
| Stefan Ritt wrote: |
|
This warning is triggered by the use of the sprintf() funciton, which can write beyond the boundary of the destination string. I replaced it by snprintf(), which should make the compiler happy. Code is committed. Unfortuantely I have no FC27 here, so if there is still some waring with the current code, please post the full warning list here.
Stefan
|
|
|