|
I believe Yanick means the SMTP port, not the port under which elogd is listening. The SMPT port is hard wired to 25, because port 587 was not yet defiend when I wrote that code. I can make this a variable, but only if it works. So Yanick can you test if port 587 accepts normal SMTP commands? We don't have such a new server at our lab and I cannot test it. Under Windows you can open a command prompt and telnet to the mail server:
telnet <server> 587
HELO test
MAIL FROM: test
your server should then reply with "220 ..." and "250 ..." messages. Once this works, I will implement the variable SMTP port.
Stefan
| Andreas Luedeke wrote: |
|
This is nicely explained in the documentation: https://elog.psi.ch/elog/config.html#global
The following options are specific to the [global] section:
Port = <port>
Specifies the TCP port under which the server is listening. Default is 80. Can be superseeded via the '-p' command line flag.
| Yanick Vachon wrote: |
|
Hi,
We've made changes in our network and now we have to use port 587 instead of port 25, how can i edit that parameter?
Thanks
|
|
|