Demo Discussion
Forum Config Examples Contributions Vulnerabilities
  Discussion forum about ELOG, Page 1 of 727  Not logged in ELOG logo
New entries since:Thu Jan 1 01:00:00 1970
ID Date Icon Author Author Email Category OS ELOG Version Subject
  69228   Sun Sep 27 16:40:16 2020 Reply Lahreche Abdelmadjidabdelmadjid.lahreche@yahoo.comBug reportWindows2006Re: Loose of Data

The solution is in the reindex 

Lahreche Abdelmadjid wrote:

Oh! I can view all data but only from the PC where ELOG is Installed !

From the other PC data missed.

Lahreche Abdelmadjid wrote:

Hi,

Since few days I Notice that I've some data who disappear from ELOG (software).

I find them on ELog/Logbooks, but can't view them in the application ELOG !

Is there a solution ?

Thanks.

 

 

  69227   Sun Sep 27 16:10:06 2020 Reply Lahreche Abdelmadjidabdelmadjid.lahreche@yahoo.comBug reportWindows2006Re: Loose of Data

Oh! I can view all data but only from the PC where ELOG is Installed !

From the other PC data missed.

Lahreche Abdelmadjid wrote:

Hi,

Since few days I Notice that I've some data who disappear from ELOG (software).

I find them on ELog/Logbooks, but can't view them in the application ELOG !

Is there a solution ?

Thanks.

 

  69226   Sun Sep 27 16:03:48 2020 Warning Lahreche Abdelmadjidabdelmadjid.lahreche@yahoo.comBug reportWindows2006Loose of Data

Hi,

Since few days I Notice that I've some data who disappear from ELOG (software).

I find them on ELog/Logbooks, but can't view them in the application ELOG !

Is there a solution ?

Thanks.

  69225   Wed Sep 23 11:51:57 2020 Reply Andreykowaraj4stuff@gmail.comBug reportLinuxELOG V3.1.4-493SOLVED

Hi again. We have solved our problem! 

It was caused by a non-defined mod_auth_openidc configuration parameter:

# Interval in seconds after which the session will be invalidated when no interaction has occurred.

# When not defined, the default is 300 seconds.

#OIDCSessionInactivityTimeout <seconds>

 

As a guess... This somehow makes elogd to forget a user who is editing an entry. And then, clicking "Submit" button makes elogd to start a new session? 

 

Andrey wrote:

Hi. 

I am an IT guy of the AMS collaboration at CERN. We have been using your wonderful elog software for about 10 years now. Thanks! It served us so well that I guess we never got in touch with you. 

Recently we have upgraded it (probably for the first time in years) up to the version ELOG V3.1.4-4936b76.

Since then, we have a particular problem. And finally, I managed to reproduce it.

So, when I edit a record and click the "Submit" button it goes back to the summary view (as usual, as before) but it does not really save the entry. And it shows that the record is still being edited. I can actually click "back" in the browser and not to lose the modifications (otherwise, if I try to edit and steal the lock, it's lost). 

I will try to figure out where the problem is coming from. The most verbose mode of the elog server I've found is just GET-POST lines, not helpful. Is there a debug mode? 

Also, we ran httpd configured with the elogd as a virtual host (proxy).

Any help is very appreciated. 

Cheers, 

Andrey

 

 

  69224   Tue Sep 22 18:54:04 2020 Question Andreykowaraj4stuff@gmail.comBug reportLinuxELOG V3.1.4-493Bug report. "Submit" button misbehave

Hi. 

I am an IT guy of the AMS collaboration at CERN. We have been using your wonderful elog software for about 10 years now. Thanks! It served us so well that I guess we never got in touch with you. 

Recently we have upgraded it (probably for the first time in years) up to the version ELOG V3.1.4-4936b76.

Since then, we have a particular problem. And finally, I managed to reproduce it.

So, when I edit a record and click the "Submit" button it goes back to the summary view (as usual, as before) but it does not really save the entry. And it shows that the record is still being edited. I can actually click "back" in the browser and not to lose the modifications (otherwise, if I try to edit and steal the lock, it's lost). 

I will try to figure out where the problem is coming from. The most verbose mode of the elog server I've found is just GET-POST lines, not helpful. Is there a debug mode? 

Also, we ran httpd configured with the elogd as a virtual host (proxy).

Any help is very appreciated. 

Cheers, 

Andrey

 

  69223   Tue Sep 22 09:27:45 2020 Reply Florian Feldbauerflorian@ep1.ruhr-uni-bochum.deQuestionLinux3.1.3Re: Query to get values for Attributes

Thanks for the tipp. I managed to use XPATH to get the values for my Type and Category attributes!

The API, I'm developing for Phoebus is quiet simple. It currently just supports Author, Subject, Type and Category as attributes and the latter two are just lists of values.

Andreas Luedeke wrote:

That would be a nice feature...

If you are good in parsing HTML you can achieve this feature: when you create a new entry "<elog-URL>?cmd=new", you'll get HTML source code that provides you with all possible attribute choices.

Disclaimer: this only works if you don't use Conditional attributes.

Florian Feldbauer wrote:

Hey,

I'm trying to integrate the Elog into our SlowControl System (Phoebus/EPICS). As a first step I translated the python library to Java. So writing new Entries and viewing them works.
But for Phoebus, you need a list of the possible values for the attributes. Currently this is done via the config file from Phoebus.

Is there a way to get the values also via a query directly from the Elog?

Cheers,
Florian

 

 

  69222   Mon Sep 21 20:03:49 2020 Idea Andreas Luedekeandreas.luedeke@psi.chQuestionLinux3.1.3Re: Query to get values for Attributes

That would be a nice feature...

If you are good in parsing HTML you can achieve this feature: when you create a new entry "<elog-URL>?cmd=new", you'll get HTML source code that provides you with all possible attribute choices.

Disclaimer: this only works if you don't use Conditional attributes.

Florian Feldbauer wrote:

Hey,

I'm trying to integrate the Elog into our SlowControl System (Phoebus/EPICS). As a first step I translated the python library to Java. So writing new Entries and viewing them works.
But for Phoebus, you need a list of the possible values for the attributes. Currently this is done via the config file from Phoebus.

Is there a way to get the values also via a query directly from the Elog?

Cheers,
Florian

 

  69221   Mon Sep 21 09:17:52 2020 Question Florian Feldbauerflorian@ep1.ruhr-uni-bochum.deQuestionLinux3.1.3Query to get values for Attributes

Hey,

I'm trying to integrate the Elog into our SlowControl System (Phoebus/EPICS). As a first step I translated the python library to Java. So writing new Entries and viewing them works.
But for Phoebus, you need a list of the possible values for the attributes. Currently this is done via the config file from Phoebus.

Is there a way to get the values also via a query directly from the Elog?

Cheers,
Florian

ELOG V3.1.4-80633ba