Extendable list of numeric items, posted by Nick Sauerwein on Mon Apr 8 15:46:49 2024
|
Hey eloggers,
I am setting up an ELOG to log the cleanroom fabrication in our startup (Luxtelligence SA).
The fabrication is structured in different process steps that are performed by several wafers at the same time (each wafer as an ID). |
Re: Extendable list of numeric items, posted by John Kelly on Mon Apr 8 17:08:11 2024
|
Hi Nick,
If I understand your question correctly maybe this might help:
https://elog.psi.ch/elog/userguide.html
Search for 'attribute' and you will find this:
"some attributes |
|
Re: Extendable list of numeric items, posted by Nick Sauerwein on Mon Apr 8 17:23:00 2024
|
Hi John,
thanks for the info =). Do you known whether there is an example of how to use the list-boxes attributes?
Best, |
|
Re: Extendable list of numeric items, posted by Konstantin Olchanski on Tue Apr 9 04:46:36 2024
|
I think what you want already exists, for example, when I reply to this message, there is this "Category" selection box with predefined answers
"Info", "Bug report", etc. For your case, replace "Category" with "Wafer type ID", replace "Info" with "1", "Bug report" with "2", etc. You numeric
values will be strings containing numbers "1", "2", etc. That works for you? K.O. |
|
Re: Extendable list of numeric items, posted by Nick Sauerwein on Tue Apr 9 09:25:01 2024
|
Hey,
thanks for your answer. I completely get your point. However, I think my question as not precise enough.
|
|
Re: Extendable list of numeric items, posted by Nick Sauerwein on Fri Apr 19 12:30:52 2024
|
Hey eloggers,
does anyone have an answer to this question?
|
Suggestion to update Mac OS X instructions in ELOG Administrator's Guide, posted by Andreas Warburton on Sat Mar 9 17:17:02 2024
|
The section of the ELOG Administrator's Guide https://elog.psi.ch/elog/adminguide.html describing
how to build and install ELOG on a Mac OS X system has worked well for me for several years, even though there have been warnings that the "load"
and "unload" subcommands of the "launchctl" command have been deprecated for some time. After trying my luck again on a new Mac |
|
Re: Suggestion to update Mac OS X instructions in ELOG Administrator's Guide, posted by Andreas Warburton on Sun Mar 10 04:25:43 2024
|
Here's a more complete/correct set of the updated commands:
sudo launchctl enable system/ch.psi.elogd
sudo launchctl bootstrap system /Library/LaunchDaemons/ch.psi.elogd.plist |
|
Re: Suggestion to update Mac OS X instructions in ELOG Administrator's Guide, posted by Stefan Ritt on Mon Apr 15 18:05:27 2024
|
Thanks for the info, I updated the adminguide.
Stefan
Andreas |
|
Re: Suggestion to update Mac OS X instructions in ELOG Administrator's Guide, posted by Andreas Warburton on Tue Apr 16 13:20:01 2024
|
Hi Stefan, Thanks a lot for implementing the updated commands. I noted that there are a few typos that could cause people confusion if not fixed:
In one case, "launchctl" is misspelled.
Confusingly, I think the two lines containing the 'enable' and 'disable' commands use the contiguous text string "system/ch.psi.elogd" |
|
Re: Suggestion to update Mac OS X instructions in ELOG Administrator's Guide, posted by Stefan Ritt on Tue Apr 16 13:31:02 2024
|
Thanks, fixed.
Stefan
Andreas |
Draft saved after ~15 minutes, then anything entered a few hours later is ignored, posted by Celeste Torkzaban on Tue Mar 12 09:12:32 2024
|
Hello,
I've noticed that many times, I start an elog and continue editing adding to a few hours later, then I submit and it deletes everything I
entered after the last time a draft was saved. I paid more attention and saw that it saves a draft after about a few minutes, and if I wait too long before |
|
Re: Draft saved after ~15 minutes, then anything entered a few hours later is ignored, posted by Stefan Ritt on Mon Apr 15 17:53:23 2024
|
That's strange. If you edit a message, indeed a draft is saved every ten seconds or so when you keep typing. In our installations we keep an elog
entry typically open for eight hours, then save it at the end of the shift, and everything works fine. Have you tried playing aournd with your config file,
like "Restrict edit time" or so? Please also make sure you have the current elog version. I sse you have 3.1.3 which is quit old. |
|
Record date isn't set to current date when replying to elogs, posted by Celeste Torkzaban on Tue Mar 12 09:20:14 2024
|
Hello,
I started using the record date feature in one logbook, since we plan to copy over old entries Joplin/Onenote. When starting a new entry, I see
that the record date is automatically set to the current date, but when I reply to an elog, the record date is automatically set to the record date of |
|
Re: Record date isn't set to current date when replying to elogs, posted by Stefan Ritt on Mon Apr 15 17:50:20 2024
|
Have you tried the config option "Preset on reply <attribute> = $date". On a reply, the <attribute> will be preset with the current
date.
Stefan |
today date in template, posted by Stefano Lacaprara on Mon Apr 8 10:49:10 2024
|
Hello,
I am using template for some elogbook entries.
|
|
Re: today date in template, posted by Stefan Ritt on Mon Apr 8 11:27:09 2024
|
This is a nice idea, but currently no text substations in templates are implemented. It only works in attributes right now.
Stefan
|
|
Re: today date in template, posted by Konstantin Olchanski on Tue Apr 9 04:50:28 2024
|
> This is a nice idea, but currently no text substations in templates are implemented. It only works in attributes right now.
but can it be done by javascript injection? load a custom .js or .html file, in this file run javascript code to root down the DOM tree until you
|
|
Re: today date in template, posted by David Pilgram on Tue Apr 9 13:49:51 2024
|
This was given to me by Andreas Luedeke of this parish.
In my elog.cfg file, I have the following:
|
|
Installation with amp on Rocky Linux, posted by Nina Bondarenko on Thu Mar 21 15:23:52 2024
|
Hello all,
I am installing elog on an Rocky Linux instance. Have dependensy problem.
rpm -Uvh elog-latest.el7.x86_64.rpm |
|
Re: Installation with amp on Rocky Linux, posted by Laurent Jean-Rigaud on Thu Mar 21 19:30:49 2024
|
Hi Nina,
The RPM is built with Kerberos (libber*), LDAP (libldap*) and SSL (libssl*) options. These libs are missing on your system, and rpm command does
not take care of dependencies. |
|
Re: Installation with amp on Rocky Linux, posted by Stefan Ritt on Fri Mar 22 07:41:56 2024
|
Is there a way to install all dependencies automatically? Like if I install a package like "emacs" I get a list of dependencies with are automatically
installed:
Dependencies Resolved |
|
Re: Installation with amp on Rocky Linux, posted by Laurent Jean-Rigaud on Sat Mar 23 23:51:37 2024
|
Normally it should work. Requirements are set in SPEC file.
$ rpm -qpi --requires elog-3.1.5-20240226.el7.x86_64.rpm
/bin/sh |
|
Re: Installation with amp on Rocky Linux, posted by scott on Mon Mar 25 10:18:55 2024
|
Is there an RPM available for Rocky 8 or Rocky 9?
And checking over https://elog.psi.ch/elog/download/RPMS/ , only el7 is found. Is that the right place to look for EL8 or EL9 based RPM? |
|
Re: Installation with amp on Rocky Linux, posted by Laurent Jean-Rigaud on Mon Mar 25 10:55:43 2024
|
Hi,
The ELOG website provides new link to RPM packages :
Linux binaries are distributed as RPMs. |
|
Re: Installation with amp on Rocky Linux, posted by scott on Mon Mar 25 16:19:02 2024
|
Hi,
Thanks for the links to EL8/EL9. |
|
Re: Installation with amp on Rocky Linux, posted by Laurent Jean-Rigaud on Mon Mar 25 16:44:03 2024
|
Yes, same build options are used.
But i can not'confirm that they are working as well as on EL7. The tests done by build script on CI/CD are quite simple and limited to
rpm installation, service start and access from cmdline to elog server. |
|
Problem in logging with LDAP and passwd, posted by Stefano Lacaprara on Mon Feb 22 12:29:16 2021
|
Dear experts,
I have a logbook which has authentication as follow
|
|
Re: Problem in logging with LDAP and passwd, posted by Sebastian Schenk on Tue Mar 2 16:03:48 2021
|
Dear Stefano,
the support for the LDAP is limited. As stated in the documentation "on an as-is basis".
|
|
Re: Problem in logging with LDAP and passwd, posted by Laurent Jean-Rigaud on Fri Mar 5 01:43:20 2021
|
Hi,
It seems that ELOG does not support LDAPS but only simple LDAP connection.
|
|
Re: Problem in logging with LDAP and passwd, posted by Sebastian Schenk on Fri Mar 5 13:54:13 2021
|
Hi,
we use the LDAPS connection in our setup and it works without issues.
You have to specify "LDAP server = ldaps://server.tld:port" and normally it uses a different port (636) than insecure LDAP (389). |
|
Re: Problem in logging with LDAP and passwd, posted by Laurent Jean-Rigaud on Sun Mar 14 17:02:49 2021
|
Hi Sebastian,
Nice to hear ! |
|
Re: Problem in logging with LDAP and passwd, posted by scott on Tue Mar 19 16:58:52 2024
|
Hi Stefano,
I also tried to set up LDAP authentication and password file-based authentication using the same settings as yours, which is not working as expected. It |
|
Runaway bogus attachment counts in Summary view attachment column, posted by Andreas Warburton on Thu Mar 7 08:55:49 2024
|
On a new MacBook Pro (Silicon M3), I installed version 3.1.5 build 23df00d9. The application appears to work normally, except that, after a short
while, the indicated attachment count (paperclips in the attachment column of the Summary view) starts to increment fairly rapidly with each time
that I visit the page. Attachment counts appear even for records that don't have any attachments. When I access records individually, either |
|
Re: Runaway bogus attachment counts in Summary view attachment column, posted by Andreas Warburton on Sat Mar 9 17:04:13 2024
|
A quick follow-up concerning the secondary matter I mentioned in my last post, namely the issues I had with the deprecated "sudo launchctl
load ..." and "sudo launchctl unload ..." subcommands currently provided in the ELOG installation instructions for MacOS. I found
a solution to this -- will post it in a separate thread. |
|
Re: Runaway bogus attachment counts in Summary view attachment column, posted by Stefan Ritt on Sat Mar 9 17:14:09 2024
|
I'm traveling right now and will only next week be able to look into that, so please be patient for a few more days.
Stefan |
|
Re: Runaway bogus attachment counts in Summary view attachment column, posted by Stefan Ritt on Thu Mar 14 21:21:33 2024
|
The problem with the attachment paperclips has been fixed in the current version.
Stefan
Andreas |
Re: Runaway bogus attachment counts in Summary view attachment column, posted by Andreas Warburton on Fri Mar 15 05:13:42 2024
|
Thanks a lot Stefan, for fixing this so quickly! I'm now running 3.1.5 fe60aaf0, with the phantom-attachment-count issue in the Summary view now
resolved. Cheers, Andreas W.
Stefan |