Logout, authentication failure causes "redir", posted by Niklas on Wed Apr 28 10:38:51 2010
|
When someone logout from my Elog, or the person does not have access to a logbook (due to "Login user =") the person gets a blank webpage
with "redir" typed in the upper left corner.
I guess it should redir to some webpage? How can I get it to actually do that? Am I missing something in elogd.cfg? |
Re: Logout, authentication failure causes "redir", posted by Stefan Ritt on Wed Apr 28 11:09:47 2010
|
Niklas wrote:
When someone logout from my Elog, or the person does not have access to a logbook (due to "Login user =") the person gets |
|
Re: Logout, authentication failure causes "redir", posted by Niklas on Wed Apr 28 16:34:17 2010
|
Stefan Ritt wrote:
|
|
Recursively open a new attribute of the same type, posted by Diogo Alves on Thu Apr 22 09:51:07 2010
|
Hi,
I have a logbook which, among other things, contains these attributes:
Options Ingredient = Egg, Oil |
|
Re: Recursively open a new attribute of the same type, posted by Stefan Ritt on Thu Apr 22 12:29:05 2010
|
Diogo Alves wrote:
Hi, |
|
Re: Recursively open a new attribute of the same type, posted by Diogo Alves on Fri Apr 23 08:32:10 2010
|
Stefan Ritt wrote:
|
|
Re: Recursively open a new attribute of the same type, posted by Stefan Ritt on Fri Apr 23 08:33:53 2010
|
Diogo Alves wrote:
I guess my next question is whether it is possible to have, for example, 2 attributes: |
|
How to control table width in listing , posted by Rex Tayloe on Thu Apr 22 20:02:46 2010
|
Greetings,
In table list mode, I would like to control how much width is given to "subject" column (my attribute). Can't find any method
to control in config file. Problem is that the subject is often quite long and jammed into a small width, when the text is often empty and has more |
Can other pages hide behind elog user authentication?, posted by Jason St. John on Sat Apr 17 01:06:58 2010
|
Hello,
The elog security suits me just fine: the content is not available unless users have logged in, and as administrator I have complete control over
who that is and what their privileges are. I can easily share somewhat sensitive notes, plots, and findings without making them completely open to the |
|
Re: Can other pages hide behind elog user authentication?, posted by Stefan Ritt on Mon Apr 19 08:55:19 2010
|
Jason St. John wrote:
Hello, |
Active Directory authentication, posted by Alan Grant on Mon Mar 29 06:05:08 2010
|
Found a thread from 2004 ("External authentication") asking about the possibility of tying that in with ELog and answer was "Not yet".
With time past, any chance this is now possible? I didn't see any more info on that since.
I'd like to explore using AD to set up/manage groups for ELog authentication. Alternatively, is there currently another way with ELog to manage groups? |
|
Re: Active Directory authentication, posted by Stefan Ritt on Thu Apr 15 13:16:25 2010
|
Alan Grant wrote:
Found a thread from 2004 ("External authentication") asking about the possibility of tying |
|
"No SMTP host defined in [global] section of configuration file" error, posted by Pedro Gil de Araújo Gordo on Wed Apr 14 12:55:38 2010
|
Hi
When I upload a message with a attachment (and also without an attachment) I get this message:
"No SMTP host defined in [global] section |
|
Re: "No SMTP host defined in [global] section of configuration file" error, posted by Stefan Ritt on Wed Apr 14 13:03:37 2010
|
Pedro Gil de Araújo Gordo wrote:
Hi |
Submit Buton, posted by Gary Wilcox on Thu Apr 8 18:06:25 2010
|
When entering data for a new log entry some folks always type in an attribute and then the "Enter" key which automatically
submits the entry. Is there a way to prevent this so the only way a new entry is submitted is with the Submit button. Also
is there a way to setup the main text box as a required attribute? |
|
Re: Submit Buton, posted by Stefan Ritt on Tue Apr 13 13:18:15 2010
|
Gary Wilcox wrote:
When entering data for a new log entry some folks always type in an attribute and then the "Enter" |
Attach multiple (many!) files at one time, posted by Eric Feng on Sun Mar 21 19:03:52 2010
|
Hi,
Is it possible to attach multiple files at one time? Right now I have to attach each individually, click submit, then confirm, then re-select
the next file... |
|
Re: Attach multiple (many!) files at one time, posted by Stefan Ritt on Mon Mar 22 08:58:47 2010
|
Eric Feng wrote:
Hi, |
|
Re: Attach multiple (many!) files at one time, posted by Eric Feng on Tue Apr 6 00:45:10 2010
|
Stefan Ritt wrote:
|