Hi,

I am doing an inline image that is about 2.2 MB.  When I do a submit, I got the following message:

Error sending Email via <i>"<email server>"</i>: Entry size too large for email notification.

May I know what is the limit of the entry size and how do I change it?  Thank you.

Jacky

Hi,

I updated an old elog entry and resubmit it as new by checking the box resubmit as new.   Does the subject line should said it is a "New ELOG entry" instead of "Updated ELOG entry"?  Thank you.

Also when some people submit a new elog, the subject line is "Updated ELOG entry".  This is a bit odd.  I can't reproduce that bug when I did my test. 

Jacky 

Hi,

I compiled the 3.1.0-2 source rpm from the download area.  Unless there is a minor release, I think the problem is still there.  Thank you.

Jacky

Hi,

We have a user who posted a lot of inline jpg.  The elog system converted those to png and thus cause the size of the elog to expand about ~4x of the original size.  It is caused the problem of entry size too large for email notifications.  Is there a way to turn off the conversion to png picture file?  May I know also know why it converts to png to store on the server?  Thank you very much.

Jacky

Hi,

I have an elogd server serves many logbooks.  May I know what is a good way to export or achive one its logbooks?  Thank you.

Jacky

Hi,

I have logbook A and logbook B.  Is it possible to move one type of entries in logbook A to logbook B?  If yes, may I know how you do it?  Thank you.

Ze

Dear Andreas and Stefan,

First of all thank you for the template for a checklist. I have created my own version of it and the HTML looks fine. For comparison, I temporarily also included the shiftcheck template provided by Stefan to my ELOG.

However, I have the same problem as JD. After submitting the data in shiftcheck, I receive the error "Cannot open file passwords.pwd: No such file or directory" and the URL is http://localhost:8085/ShiftCheck/?cmd=Submit&suppress=1&unm=&upwd=&Author=Marcel+Zauner-Wieczorek&edit_id=&D=1&M=4&Shift=Morning&a4=&h2=&a5=&a6=&c1=&c2=&c3=&c4=&c5=&bb1=&cr1=&cr9=&cr18=&cr20=&cr21=&cr23=&cr24="

I have tried to include the path of the password file in the cfg file (using "", <>, <"">, and only the path name), but then the elogd.exe won't start at all unless I change it back to the simple "Password file = passwords.pwd".

Here is an excerpt of my config file:

****

[global]
port = 8085
 

Password file = passwords.pwd
Login expiration = 1
Admin user = Marcel
Login user = Marcel

Self register = 1

Group General = ShiftCheck
Group Gas phase instruments = Checklist_MARGA

Restrict edit time = 1
Admin restrict edit time = 0
Autosave = 60

[ShiftCheck]
Comment = Shift Check List

Attributes = Author, D, M, Y, Shift, a1, a2, a3, a4, a5, h1, h2, h3, h4, h5, c1, c2, c3, c4, c5, c6, c7, bb1, cr1, cr2, cr3, cr4, cr5, cr6, cr7, cr8, cr9, cr10, cr11, cr12, cr13, cr14, cr15, cr16, cr17, cr18, cr19, cr20, cr21, cr22, cr23, cr24, cr25, cr26, sw1, sw2, sw3, sw4, sw5
Quick filter = Shift, Author
Options Shift = Morning, Evening, Night

Enable attachments = 0
Show text = 0
Custom new form = shiftcheck.html
Custom edit form = shiftcheck.html
Custom display form = shiftcheck.html
List after submit = 1

 

[Checklist_MARGA]
Comment = Check List for MARGA

Date Format = %d.%m.%Y
Time Format = %d.%m.%Y %H:%M:%S

Reverse sort = 1

Attributes = Author, D, M, Y, On, DP2h, T_SJAC, T_heat, EC_An, EC_Cat, IonBal, IS_Cat_Ae, IS_An_Ae, IS_Cat_Ga, IS_An_Ga, P1, P2, Err, Com

Quick filter = Author

Enable attachments = 0
Show text = 0
Custom new form = checklist_MARGA.html
Custom edit form = checklist_MARGA.html
Custom display form = checklist_MARGA.html
List after submit = 1
***

I am actually confused about the passwords.pwd file. I have successfully created several users with passwords and I can use their credentials to log into the different labbooks. However, none of these users (let along their (encrypted) passwords) turn up in the passwords.pwd file. I don't know where ELOG saves these information, but it's apparently not the passwords.pwd file that is defined in the cfg file and that I have access to.

I hope that someone can help me with this issue. Otherwise, I would omit the password function within ELOG and find an external solution for a password protection.

Cheers,

Marcel

Please excuse my double-posting. But my first entry was not displayed on the forum and I haven't received feedback yet. I think this is because I responded to an entry that was still in draft mode, whereas my entry was a "normal" entry. My initial entry has the Message ID: 69870 and was in reply to: 68348

***

Dear Andreas and Stefan,

First of all thank you for the template for a checklist. I have created my own version of it and the HTML looks fine. For comparison, I temporarily also included the shiftcheck template provided by Stefan to my ELOG.

However, I have the same problem as JD. After submitting the data in shiftcheck, I receive the error "Cannot open file passwords.pwd: No such file or directory" and the URL is http://localhost:8085/ShiftCheck/?cmd=Submit&suppress=1&unm=&upwd=&Author=Marcel+Zauner-Wieczorek&edit_id=&D=1&M=4&Shift=Morning&a4=&h2=&a5=&a6=&c1=&c2=&c3=&c4=&c5=&bb1=&cr1=&cr9=&cr18=&cr20=&cr21=&cr23=&cr24="

I have tried to include the path of the password file in the cfg file (using "", <>, <"">, and only the path name), but then the elogd.exe won't start at all unless I change it back to the simple "Password file = passwords.pwd".

Here is an excerpt of my config file:

    ****

    [global]
    port = 8085
     

    Password file = passwords.pwd
    Login expiration = 1
    Admin user = Marcel
    Login user = Marcel

    Self register = 1

    Group General = ShiftCheck
    Group Gas phase instruments = Checklist_MARGA

    Restrict edit time = 1
    Admin restrict edit time = 0
    Autosave = 60

    [ShiftCheck]
    Comment = Shift Check List

    Attributes = Author, D, M, Y, Shift, a1, a2, a3, a4, a5, h1, h2, h3, h4, h5, c1, c2, c3, c4, c5, c6, c7, bb1, cr1, cr2, cr3, cr4, cr5, cr6, cr7, cr8, cr9, cr10, cr11, cr12, cr13, cr14, cr15, cr16, cr17, cr18, cr19, cr20, cr21, cr22, cr23, cr24, cr25, cr26, sw1, sw2, sw3, sw4, sw5
    Quick filter = Shift, Author
    Options Shift = Morning, Evening, Night

    Enable attachments = 0
    Show text = 0
    Custom new form = shiftcheck.html
    Custom edit form = shiftcheck.html
    Custom display form = shiftcheck.html
    List after submit = 1

    [Checklist_MARGA]
    Comment = Check List for MARGA

    Date Format = %d.%m.%Y
    Time Format = %d.%m.%Y %H:%M:%S

    Reverse sort = 1

    Attributes = Author, D, M, Y, On, DP2h, T_SJAC, T_heat, EC_An, EC_Cat, IonBal, IS_Cat_Ae, IS_An_Ae, IS_Cat_Ga, IS_An_Ga, P1, P2, Err, Com

    Quick filter = Author

    Enable attachments = 0
    Show text = 0
    Custom new form = checklist_MARGA.html
    Custom edit form = checklist_MARGA.html
    Custom display form = checklist_MARGA.html
    List after submit = 1
    ***

I am actually confused about the passwords.pwd file. I have successfully created several users with passwords and I can use their credentials to log into the different labbooks. However, none of these users (let along their (encrypted) passwords) turn up in the passwords.pwd file. I don't know where ELOG saves these information, but it's apparently not the passwords.pwd file that is defined in the cfg file and that I have access to.

I hope that someone can help me with this issue. Otherwise, I would omit the password function within ELOG and find an external solution for a password protection.

Cheers,

Marcel