ELOG Forum

Demo Discussion

Forum Config Examples Contributions Vulnerabilities

Discussion forum about ELOG, Page 140 of 806

Not logged in

Find | Login | Help

Full | Summary | Threaded | Hide attachments

6444 Entries

Goto page Previous 1, 2, 3 ... 139, 140, 141 ... 804, 805, 806 Next

Mon Jan 15 16:27:19 2018

Safety is getting more and more an issue these days. Normal browsers don't accept self-signed certificates any more. One possibility is to get a certificate from https://letsencrypt.org/

Stefan

Tim Schelfhout wrote:

Hello there,

Can anyone point out to me how I can avoid the unsafe browsing when accessing our local ELOG?
Browsing with chrome and always getting the unsafe browsing page. One has to go through the advanced
button to continue ...

I once had my setup with SSL certificate (local signed, not through the CA) but I somehow cannot get it
to work anymore. Just create a local certificate and copy the certificates to all browsers that access the ELOG site, no?

Anyway, a small guide would be great.

68715

Mon Jan 15 15:56:07 2018

Tim Schelfhout

timpieworks@gmail.com

Hello there,

Anyway, a small guide would be great.

68714

Fri Jan 12 09:54:41 2018

Hi all,

Some elog users of our site(CSNS) mentioned some advice about attachment:

1.Can imagemagick create thumbnail for .bmp file now?

2.Can re-sort the attachments after attachments uploaded by dragging or clicking up/down arrow or anything except deleting and re-upload attachment again?

3.Can add some description under the thumbnail of uploaded attachment? I've suggested them adding the description to the name of attchment or writing the detail in the text area. They are seem not very satisfied with this solution.

Any advice and suggestion will be appreciated.

Cheers

68713

Mon Dec 11 13:20:49 2017

Tooltips on 'ROptions' work since 2007, but your version 2.9.2 is pre-2007, so you should consider to upgrade.

Stefan

Grant Jeffcote wrote:

Stefan, I know this request was a long time ago on an older version of E-Log (which we are still using) but can you tell me if Tooltips on Radio Buttons was ever implemented, it's not working on our version (2.92.2)?
Working as it should on MOptions?

Stefan Ritt wrote:

Grant Jeffcote wrote:

I can't seem to get the Tooltips to show up using the 'ROptions' (radio buttons) though? Could you check if it is available for this please?

Did I tell that it also works with 'ROptions' ??? It does not! I implemented this just now in revision 1788. The fix will be contained in the next release.

68712

Mon Dec 11 13:16:32 2017

Have you set

Resolve host names = 1

in the config file? If it still does not work, run "elogd -v" from the terminal and watch the output. You should see someting like:

Remote host "mpc1865.psi.ch" matches "ALL" in "Hosts deny". Access denied.
Remote host "mpc1865.psi.ch" matches ".lbl.gov" in "Hosts allow". Access granted.

Regards,
Stefan

Andreas Luedeke wrote:

Hi Susan,

the documentation states that you should start elogd with the -v option from the command line and look at the output. Did you try this?

You might post the output here to get further help.

Cheers

Andreas

Susan James wrote:

Hi All,

We're still having trouble with hosts.allow and hosts.deny.

We're trying to allow all of our domain lbl.gov to the access list

for our logbooks. But the combination below is not working.

==========================

[ below denies ALL ]

Hosts allow = .lbl.gov
Hosts deny = ALL

[ below denies ALL ]

Hosts deny = ALL

Hosts allow = .lbl.gov

========================
Can someone help?

Susan James wrote:

thanks for your quick reply.

the configuration is still not working. See my entry below which denies everyone.

I've tried many different combinations of 'hosts allow and hosts deny'

we want to restrict all our logbooks to only domain lbl.gov

[ below denies ALL ]

Hosts allow = .lbl.gov
Hosts deny = ALL

[ below denies ALL ]

Hosts deny = ALL

Hosts allow = .lbl.gov

Can you help?

Andreas Luedeke wrote:

Hi Susan,

according to the documentation you need to add "Hosts deny = All" in addition to the "Hosts allow" command.

Here is the relevant excerpt from the documentation (https://midas.psi.ch/elog/config.html#access).

Cheers

Andreas

Hosts allow = <list>
Hosts deny = <list>

These two settings can be used to restrict the access to the logbook to certain computers. It is similar to the UNIX hosts.allow and hosts.deny files. The list can consist of individual host names or IP numbers, subnet masks like 123.213. (note the trailing '.') or .mit.edu, or the word All. The following rules are applied:

Access will be granted when a host matches a pattern in "hosts allow".
Otherwise, access will be denied when a host matches a pattern in "hosts deny".
Otherwise, access will be granted.

These rules are applied before any password is checked. To debug problems, start elogd with the "-v" flag, in which case the rule checking is printed on the screen.

Susan James wrote:

I'm trying to wrap our elog instance to our company domain which is lbl.gov

I add this entry below (without quotes) to elogd.cfg and it's not working. the world can see our logbooks

" Hosts Allow = *.lbl.gov ".

can someone help?

68711

Fri Dec 8 19:47:04 2017

Andreas Luedeke

andreas.luedeke@psi.ch

Hi Susan,

the documentation states that you should start elogd with the -v option from the command line and look at the output. Did you try this?

You might post the output here to get further help.

Cheers

Andreas

Susan James wrote:

Hi All,

We're still having trouble with hosts.allow and hosts.deny.

We're trying to allow all of our domain lbl.gov to the access list

for our logbooks. But the combination below is not working.

==========================

[ below denies ALL ]

Hosts allow = .lbl.gov
Hosts deny = ALL

[ below denies ALL ]

Hosts deny = ALL

Hosts allow = .lbl.gov

========================
Can someone help?

Susan James wrote:

thanks for your quick reply.

the configuration is still not working. See my entry below which denies everyone.

I've tried many different combinations of 'hosts allow and hosts deny'

we want to restrict all our logbooks to only domain lbl.gov

[ below denies ALL ]

Hosts allow = .lbl.gov
Hosts deny = ALL

[ below denies ALL ]

Hosts deny = ALL

Hosts allow = .lbl.gov

Can you help?

Andreas Luedeke wrote:

Hi Susan,

according to the documentation you need to add "Hosts deny = All" in addition to the "Hosts allow" command.

Here is the relevant excerpt from the documentation (https://midas.psi.ch/elog/config.html#access).

Cheers

Andreas

Hosts allow = <list>
Hosts deny = <list>

Access will be granted when a host matches a pattern in "hosts allow".
Otherwise, access will be denied when a host matches a pattern in "hosts deny".
Otherwise, access will be granted.

These rules are applied before any password is checked. To debug problems, start elogd with the "-v" flag, in which case the rule checking is printed on the screen.

Susan James wrote:

I'm trying to wrap our elog instance to our company domain which is lbl.gov

I add this entry below (without quotes) to elogd.cfg and it's not working. the world can see our logbooks

" Hosts Allow = *.lbl.gov ".

can someone help?

68710

Thu Dec 7 21:54:58 2017

Hi All,

We're still having trouble with hosts.allow and hosts.deny.

We're trying to allow all of our domain lbl.gov to the access list

for our logbooks. But the combination below is not working.

==========================

[ below denies ALL ]

Hosts allow = .lbl.gov
Hosts deny = ALL

[ below denies ALL ]

Hosts deny = ALL

Hosts allow = .lbl.gov

========================
Can someone help?

Susan James wrote:

thanks for your quick reply.

the configuration is still not working. See my entry below which denies everyone.

I've tried many different combinations of 'hosts allow and hosts deny'

we want to restrict all our logbooks to only domain lbl.gov

[ below denies ALL ]

Hosts allow = .lbl.gov
Hosts deny = ALL

[ below denies ALL ]

Hosts deny = ALL

Hosts allow = .lbl.gov

Can you help?

Andreas Luedeke wrote:

Hi Susan,

according to the documentation you need to add "Hosts deny = All" in addition to the "Hosts allow" command.

Here is the relevant excerpt from the documentation (https://midas.psi.ch/elog/config.html#access).

Cheers

Andreas

Hosts allow = <list>
Hosts deny = <list>

Access will be granted when a host matches a pattern in "hosts allow".
Otherwise, access will be denied when a host matches a pattern in "hosts deny".
Otherwise, access will be granted.

These rules are applied before any password is checked. To debug problems, start elogd with the "-v" flag, in which case the rule checking is printed on the screen.

Susan James wrote:

I'm trying to wrap our elog instance to our company domain which is lbl.gov

I add this entry below (without quotes) to elogd.cfg and it's not working. the world can see our logbooks

" Hosts Allow = *.lbl.gov ".

can someone help?

68709

Wed Dec 6 13:34:56 2017

Re: possible DOS vulnerability with negative Content-Length field

I have fixed this issue in the current develop branch of elog.

Stefan

Christian Herzog wrote:

Hi,

a routine scan revealed a possible DOS attack vector: sending an invalid POST HTTP request with a negative Content-Length field crashes our elog instance, leading to service unavailability.

thanks,

-Christian

-- 
Dr. Christian Herzog <herzog@phys.ethz.ch>  support: +41 44 633 26 68
IT Services Group, HPT H 8                    voice: +41 44 633 39 50
Department of Physics, ETH Zurich           
8093 Zurich, Switzerland                     http://nic.phys.ethz.ch/

Goto page Previous 1, 2, 3 ... 139, 140, 141 ... 804, 805, 806 Next

ELOG V3.1.5-3fb85fa6