Re: < img > in Display Attribute, posted by Stefan Ritt on Sat Jul 16 12:30:33 2005
|
[quote="Emiliano Gabrielli"]IMHO the solution may be in allowing html code only in the cfg, not in the value of the field..
i.e., elog has to first allow html in the cfg attribute and then replace every $attribute with their values... this values as to be translated in html
entities in order to solve the problem
|
|
Re: Cannot stat() config file , posted by Stefan Ritt on Wed Jul 20 20:13:26 2005
|
[quote="Stefan Rudat"]Cannot stat() config file; No such file or directory.[/quote]
I do not know what exactly is going on. This error occurs during runtime when elog tries to check if the config file (usually elogd.cfg) has changed. It |
|
Re: Omitting some fields in e-mail, posted by Stefan Ritt on Wed Jul 20 20:54:01 2005
|
> E.g, if you have the following:
> Attributes = TA, Endret, UA, Pri, Status, Oppdragsgiver, EpostTil, EpostIKT, Tittel
>
|
|
Re: elog utility for submission used wrong 'Host:' in POST header, posted by Stefan Ritt on Wed Jul 20 21:03:29 2005
|
[quote="Emiliano Gabrielli"]This is not completally true IMHO .. better, it is, but it is not the only problem.
Elog seems to speak HTML/1.0, where "host:" is not implemented ... Since ELOG does [B]not[/B] support Vhosts I think the right beaviour is to [U]remove |
|
Re: [code] should be a sort of <CDATA >, posted by Stefan Ritt on Wed Jul 20 21:43:56 2005
|
[quote="Emiliano Gabrielli"]Using the \[code] elocode should be intended also to preserve the tagged text from beeing parsed as html or elcode itself ..
this is an example:
|
|
Re: Display Subject and HTML tags, regression, posted by Stefan Ritt on Wed Jul 20 22:28:14 2005
|
[quote="Emiliano Gabrielli"]rev 1.703 makes the following code not to work:
[CODE]Display Subject = <b>$subject</b>[/CODE]
|
|
Re: Display Subject and HTML tags, regression, posted by Stefan Ritt on Wed Jul 20 22:39:05 2005
|
[quote="Emiliano Gabrielli"][quote="Emiliano Gabrielli"]rev 1.703 makes the following code not to work:
[CODE]Display Subject = <b>$subject</b>[/CODE]
|
|
Re: hide attributes when view the logbook, posted by Stefan Ritt on Wed Jul 20 23:24:59 2005
|
[quote="Juliana Peng"]but it seems only effective when adding the new entry. All the attributes will show in logbook. Is there a way to hide some of the
attributes? It would be good to let each user to choose what to see what not to see, create their own view. Can you put it on your to-do list or wishlist?[/quote]
|