reproduced on the latest newly compiled Elogd, posted by Andrey on Tue May 10 10:58:12 2022
|
I have just setup a new ELOG server on another machine. I took the latest source code from here: http://elog.psi.ch/elog/download/tar/elog-latest.tar.gz. Compiled it and ran.
Still the same problem with Safari. |
repository of elog configuration files, posted by Anand Sengupta on Mon Feb 7 09:58:25 2005
|
Hi
Is there a repository of elog configuration files for newbies to lookup and
learn ? I have seen the 'contributions' elog - useful as it is ... it is not
much. I would appreciate if someone can point out such a site where people
have contributed their elog configuration files.
Thanks,
AnandO. |
|
reply option in elog client not working, posted by Gerald Ebberink on Tue Aug 22 11:31:11 2006
|
When I try to make a reply with the following command
elog -v -h hostname -p 80 -l 'logbook wannabe' -u 'guess' 'what' -a 'Phase=During Measuring' -a Author='Gerald Ebberink' -a 'Subject=Octave measurements' -n 1 -f '22-Aug-2006 boxplot hole sizes of panel2SqTop.jpg' -f '22-Aug-2006 boxplot hole area of panel2SqTop.jpg' -f '22-Aug-2006 boxplot POA of panel2SqTop.jpg' -f '22-Aug-2006 boxplot hole sizes of panel2RTop.jpg' -f '22-Aug-2006 boxplot hole area of panel2RTop.jpg' -f '22-Aug-2006 boxplot POA of panel2RTop.jpg' -f '22-Aug-2006 boxplot hole sizes of panel6SqTop.jpg' -f '22-Aug-2006 boxplot hole area of panel6SqTop.jpg' -f '22-Aug-2006 boxplot POA of panel6SqTop.jpg' -f '22-Aug-2006 boxplot comparison of POA.jpg' -r 65 'Automated addition of measurment results (png)'
In verbose mode I found that the main difference is that
with the -r option it wants to go to the following url
Location: http://host/logbook/
and without it goes to
Location http://host/logbook+wannabe/66
my best guess would be that it should also point to logbook+wannabe |
rename menu commands , posted by Francois Cloutier on Tue Apr 11 17:24:48 2017
|
Hi !
I do have an setup were I would like to rename the menu command but keeping their fonction. Namely, I would like to rename the "copy to" button to "Duplicate" since thats the option I would like to put in place ( Copy to = Same logbook only).
I tried to do so with css but it is not possible since the button doesn't have a specific id... Would you have another solution ?
Thanks for your help ! |
|
remove elog from EPEL and Fedora., posted by Konstantin Olchanski on Mon Dec 5 04:15:17 2022
|
> elogd binary from EPEL
thank you for bringing this up to our attention. we recently went through this with debian and ubuntu. the elog package was severely out of date and
did not include the security patches that went it right before covid started in the Winter of 2020.
the elogd package in EPEL7 is insecure and should not be used. (I see it is removed from EPEL8, EPEL9 and current Fedora).
I will have to contact EPEL maintainers to have it removed from EPEL7 (or at least to have it marked as "insecure, do not use").
https://dl.fedoraproject.org/pub/epel/7/SRPMS/Packages/e/elog-3.1.4-1.20190113git283534d97d5a.el7.src.rpm
https://packages.fedoraproject.org/pkgs/elog/elog/
https://packages.fedoraproject.org/pkgs/elog/elog/fedora-35.html
https://packages.fedoraproject.org/pkgs/elog/elog/epel-7.html
note in the changelog "Update to post-release snapshot of 3.1.4. - Fix several security issues."
K.O. |
|
remove elog from EPEL and Fedora., posted by Germano Massullo on Tue Dec 20 17:37:42 2022
|
> > elogd binary from EPEL
>
> thank you for bringing this up to our attention. we recently went through this with debian and ubuntu. the elog package was severely out of date and
> did not include the security patches that went it right before covid started in the Winter of 2020.
>
> the elogd package in EPEL7 is insecure and should not be used. (I see it is removed from EPEL8, EPEL9 and current Fedora).
>
> I will have to contact EPEL maintainers to have it removed from EPEL7 (or at least to have it marked as "insecure, do not use").
>
> https://dl.fedoraproject.org/pub/epel/7/SRPMS/Packages/e/elog-3.1.4-1.20190113git283534d97d5a.el7.src.rpm
>
> https://packages.fedoraproject.org/pkgs/elog/elog/
> https://packages.fedoraproject.org/pkgs/elog/elog/fedora-35.html
> https://packages.fedoraproject.org/pkgs/elog/elog/epel-7.html
>
> note in the changelog "Update to post-release snapshot of 3.1.4. - Fix several security issues."
>
> K.O.
Good day, elog has never been retired in EPEL 7. It is still there
https://src.fedoraproject.org/rpms/elog/tree/epel7
I am pretty sure because I am a Fedora/RHEL package maintainer and a retired package should contain in its Git branch only a file named "dead.package" |
|
redirect permission, posted by Adam on Mon Feb 13 13:38:19 2012
|
Hi All,
Perhaps a trivial question but some issues have arisen accessing my long-running elog with SSL enabled. I suspect firewalls and browser updates are involved and I do not have the time or experience to diagnose and debug such a potential black-hole of difficulties. Instead I am looking for a quick fix, and the first step - switching off sll - seems to work. Now I would like to use redirect so that the elog is running under apache, however this is where I have stumbled; I have passwords so the plan is to eventually secure using apache. Apache works fine and is running pages on ports 80 and 443, although I seem unable to redirect the elog (port 8080). Following the instructions on the administrators guide I get:
Forbidden
You don't have permission to access /elog/ on this server.
The page is found at least so my redirect is doing something, and I suspect the solution is trivial, though I'm not too sure where to start.
-------------------
Also, what is the best practice for updating one's elog version. I originally installed using a tarball.
|
|
redirect errors via apache2, posted by djek on Mon Jan 23 10:30:51 2006
|
Since elog 2.6.0 we cannot redirect our elog via apache2.
in apache2.conf we have (had for a long time):
Redirect permanent /elog http://elog.oursite.com/elog/
ProxyPass /elog/ http://elog.oursite.com:8080/
When visiting the url, this results in:
The proxy server received an invalid response from an upstream server.
The proxy server could not handle the request GET /elog/myelog/.
After testing we found that ELOG V2.6.0-beta2 works just fine.
2.6.0 stable crashes after visiting a redirected url.
Running on debian sarge |