Hi Xuan Wu,

I got error from stunel as below.

2016.11.17 14:07:01 LOG5[0]: Service [gmail-smtp] accepted connection from 127.0.0.1:52473
2016.11.17 14:07:03 LOG3[0]: s_connect: connect 74.125.130.109:465: Connection refused (WSAECONNREFUSED) (10061)
2016.11.17 14:07:04 LOG3[0]: s_connect: connect 74.125.130.108:465: Connection refused (WSAECONNREFUSED) (10061)
2016.11.17 14:07:04 LOG5[0]: Connection reset: 0 byte(s) sent to SSL, 0 byte(s) sent to socket
2016.11.17 14:09:02 LOG5[1]: Service [gmail-smtp] accepted connection from 127.0.0.1:52510
2016.11.17 14:09:03 LOG3[1]: s_connect: connect 74.125.130.108:465: Connection refused (WSAECONNREFUSED) (10061)
2016.11.17 14:09:04 LOG3[1]: s_connect: connect 74.125.130.109:465: Connection refused (WSAECONNREFUSED) (10061)
2016.11.17 14:09:04 LOG5[1]: Connection reset: 0 byte(s) sent to SSL, 0 byte(s) sent to socket
2016.11.17 14:18:04 LOG5[2]: Service [gmail-smtp] accepted connection from 127.0.0.1:52569
2016.11.17 14:18:05 LOG3[2]: s_connect: connect 74.125.130.109:465: Connection refused (WSAECONNREFUSED) (10061)
2016.11.17 14:18:06 LOG3[2]: s_connect: connect 74.125.130.108:465: Connection refused (WSAECONNREFUSED) (10061)
2016.11.17 14:18:06 LOG5[2]: Connection reset: 0 byte(s) sent to SSL, 0 byte(s) sent to socket
2016.11.17 14:18:25 LOG5[3]: Service [gmail-smtp] accepted connection from 127.0.0.1:52581
2016.11.17 14:18:26 LOG3[3]: s_connect: connect 74.125.130.108:465: Connection refused (WSAECONNREFUSED) (10061)
2016.11.17 14:18:27 LOG3[3]: s_connect: connect 74.125.130.109:465: Connection refused (WSAECONNREFUSED) (10061)
2016.11.17 14:18:27 LOG5[3]: Connection reset: 0 byte(s) sent to SSL, 0 byte(s) sent to socket

Do you know about these?

You can use command to test your email service and your username and password. 

telnet your.email.host  25

ehlo hostname

auth login

(input your username)   note that:the username and password should be generaterd by command perl -MMIME::Base64 -e 'print encode_base64 (“username”)’ 

(input your password)

Then you can test the server and username and password are right or not.

And you can set "Logging level = 3" elogd -v and see what is going on?

Hi Xuan Wu,

Nothing happen, I still got error. Do you have any more idea? I really confuse.

You can use command to test your email service and your username and password. 

telnet your.email.host  25

ehlo hostname

auth login

(input your username)   note that:the username and password should be generaterd by command perl -MMIME::Base64 -e 'print encode_base64 (“username”)’ 

(input your password)

Then you can test the server and username and password are right or not.

And you can set "Logging level = 3" elogd -v and see what is going on?

Hi Xuan Wu,

Nothing happen, I still got an error.

I can connect to server but cannot send

Do you have any more idea?

I use "SMTP username = <My_email_account>" without "@xxx" for my site. So you can try it like that. HTH

Hi All,

I have a problem with email configuration with gmail account. I use Elog V3.1.1 and Stuneel V5-32 with Windows 7 Profesional 64-bit

I follow the instruction in elog:68039 This is my configuration elogd.cfg and stunnel.conf

# My elogd.cfg

;Mail server configuration
smtp host = 127.0.0.1
SMTP username = <My_email_account>@gmail.com
SMTP Password = MjhNYXNrb2tpMjI=

Email encoding = 1
Logout to main = 1

# My Stunnel.conf

[gmail-pop3]
client = yes
accept = 127.0.0.1:110
connect = pop.gmail.com:995
verify = 2
CAfile = ca-certs.pem
checkHost = pop.gmail.com
OCSPaia = yes

[gmail-imap]
client = yes
accept = 127.0.0.1:143
connect = imap.gmail.com:993
verify = 2
CAfile = ca-certs.pem
checkHost = imap.gmail.com
OCSPaia = yes

[elogssl]
client = yes
accept = 127.0.0.1:25
connect = smtp.gmail.com:465
verify = 2
CApath = /etc/ssl/certs

[gmail-smtp]
client = yes
accept = 127.0.0.1:25
connect = smtp.gmail.com:465
verify = 2
CAfile = ca-certs.pem
checkHost = smtp.gmail.com
OCSPaia = yes

I got error "Error sending Email via <i>"127.0.0.1"</i>" when I run it.

Could somebody help me?

Thanks,

Hi,

I'm trying to upgrade ELOG 2.9.2, which I have been used many years, to the new version (3.1.2).

I can't run the new version even from the command line:

Message box appears with message:

What do I do wrong ?

I'm trying to use my old config file. New default config gave the same result :-(