Demo Discussion
Forum Config Examples Contributions Vulnerabilities
  Discussion forum about ELOG, Page 173 of 808  Not logged in ELOG logo
New entries since:Thu Jan 1 01:00:00 1970
ID Datedown Icon Author Author Email Category OS ELOG Version Subject
  68456   Tue Nov 15 11:22:31 2016 Reply Xuan Wuwux@ihep.ac.cnQuestionWindows3.1.1Re: How to configure email? "Error sending Email via <i>"127.0.0.1"</i>"

You can use command to test your email service and your username and password. 

telnet your.email.host  25

ehlo hostname

auth login

(input your username)   note that:the username and password should be generaterd by command perl -MMIME::Base64 -e 'print encode_base64 (“username”)’ 

(input your password)

Then you can test the server and username and password are right or not.

And you can set "Logging level = 3" elogd -v and see what is going on?

I Gede Made Wira Saputra wrote:

Hi Xuan Wu,

Nothing happen, I still got error. Do you have any more idea? I really confuse.

Xuan Wu wrote:

I use "SMTP username = <My_email_account>" without "@xxx" for my site. So you can try it like that. HTH

I Gede Made Wira Saputra wrote:

Hi All,

I have a problem with email configuration with gmail account. I use Elog V3.1.1 and Stuneel V5-32 with Windows 7 Profesional 64-bit

I follow the instruction in elog:68039 This is my configuration elogd.cfg and stunnel.conf

# My elogd.cfg

;Mail server configuration
smtp host = 127.0.0.1
SMTP username = <My_email_account>@gmail.com
SMTP Password = MjhNYXNrb2tpMjI=

Email encoding = 1
Logout to main = 1

# My Stunnel.conf

[gmail-pop3]
client = yes
accept = 127.0.0.1:110
connect = pop.gmail.com:995
verify = 2
CAfile = ca-certs.pem
checkHost = pop.gmail.com
OCSPaia = yes

[gmail-imap]
client = yes
accept = 127.0.0.1:143
connect = imap.gmail.com:993
verify = 2
CAfile = ca-certs.pem
checkHost = imap.gmail.com
OCSPaia = yes

[elogssl]
client = yes
accept = 127.0.0.1:25
connect = smtp.gmail.com:465
verify = 2
CApath = /etc/ssl/certs

[gmail-smtp]
client = yes
accept = 127.0.0.1:25
connect = smtp.gmail.com:465
verify = 2
CAfile = ca-certs.pem
checkHost = smtp.gmail.com
OCSPaia = yes

 

I got error "Error sending Email via <i>"127.0.0.1"</i>" when I run it.

Could somebody help me?

Thanks,

 

 

 

 

 

  68455   Tue Nov 15 10:24:18 2016 Reply I Gede Made Wira Saputraigmadews@gmail.comQuestionWindows3.1.1Re: How to configure email? "Error sending Email via <i>"127.0.0.1"</i>"

Hi Xuan Wu,

Nothing happen, I still got error. Do you have any more idea? I really confuse.

Xuan Wu wrote:

I use "SMTP username = <My_email_account>" without "@xxx" for my site. So you can try it like that. HTH

I Gede Made Wira Saputra wrote:

Hi All,

I have a problem with email configuration with gmail account. I use Elog V3.1.1 and Stuneel V5-32 with Windows 7 Profesional 64-bit

I follow the instruction in elog:68039 This is my configuration elogd.cfg and stunnel.conf

# My elogd.cfg

;Mail server configuration
smtp host = 127.0.0.1
SMTP username = <My_email_account>@gmail.com
SMTP Password = MjhNYXNrb2tpMjI=

Email encoding = 1
Logout to main = 1

# My Stunnel.conf

[gmail-pop3]
client = yes
accept = 127.0.0.1:110
connect = pop.gmail.com:995
verify = 2
CAfile = ca-certs.pem
checkHost = pop.gmail.com
OCSPaia = yes

[gmail-imap]
client = yes
accept = 127.0.0.1:143
connect = imap.gmail.com:993
verify = 2
CAfile = ca-certs.pem
checkHost = imap.gmail.com
OCSPaia = yes

[elogssl]
client = yes
accept = 127.0.0.1:25
connect = smtp.gmail.com:465
verify = 2
CApath = /etc/ssl/certs

[gmail-smtp]
client = yes
accept = 127.0.0.1:25
connect = smtp.gmail.com:465
verify = 2
CAfile = ca-certs.pem
checkHost = smtp.gmail.com
OCSPaia = yes

 

I got error "Error sending Email via <i>"127.0.0.1"</i>" when I run it.

Could somebody help me?

Thanks,

 

 

 

 

  68454   Tue Nov 15 09:46:25 2016 Reply Xuan Wuwux@ihep.ac.cnQuestionWindows3.1.1Re: How to configure email? "Error sending Email via <i>"127.0.0.1"</i>"

You can use command to test your email service and your username and password. 

telnet your.email.host  25

ehlo hostname

auth login

(input your username)   note that:the username and password should be generaterd by command perl -MMIME::Base64 -e 'print encode_base64 (“username”)’ 

(input your password)

Then you can test the server and username and password are right or not.

And you can set "Logging level = 3" elogd -v and see what is going on?

I Gede Made Wira Saputra wrote:

Hi Xuan Wu,

Nothing happen, I still got an error.

Do you have any more idea?

Xuan Wu wrote:

I use "SMTP username = <My_email_account>" without "@xxx" for my site. So you can try it like that. HTH

I Gede Made Wira Saputra wrote:

Hi All,

I have a problem with email configuration with gmail account. I use Elog V3.1.1 and Stuneel V5-32 with Windows 7 Profesional 64-bit

I follow the instruction in elog:68039 This is my configuration elogd.cfg and stunnel.conf

# My elogd.cfg

;Mail server configuration
smtp host = 127.0.0.1
SMTP username = <My_email_account>@gmail.com
SMTP Password = MjhNYXNrb2tpMjI=

Email encoding = 1
Logout to main = 1

# My Stunnel.conf

[gmail-pop3]
client = yes
accept = 127.0.0.1:110
connect = pop.gmail.com:995
verify = 2
CAfile = ca-certs.pem
checkHost = pop.gmail.com
OCSPaia = yes

[gmail-imap]
client = yes
accept = 127.0.0.1:143
connect = imap.gmail.com:993
verify = 2
CAfile = ca-certs.pem
checkHost = imap.gmail.com
OCSPaia = yes

[elogssl]
client = yes
accept = 127.0.0.1:25
connect = smtp.gmail.com:465
verify = 2
CApath = /etc/ssl/certs

[gmail-smtp]
client = yes
accept = 127.0.0.1:25
connect = smtp.gmail.com:465
verify = 2
CAfile = ca-certs.pem
checkHost = smtp.gmail.com
OCSPaia = yes

 

I got error "Error sending Email via <i>"127.0.0.1"</i>" when I run it.

Could somebody help me?

Thanks,

 

 

 

 

 

  Draft   Tue Nov 15 09:39:07 2016 Reply I Gede Made Wira Saputraigmadews@gmail.comQuestionWindows3.1.1Re: How to configure email? "Error sending Email via <i>"127.0.0.1"</i>"

Hi Xuan Wu,

Nothing happen, I still got an error.

I can connect to server but cannot send

Do you have any more idea?

Xuan Wu wrote:

I use "SMTP username = <My_email_account>" without "@xxx" for my site. So you can try it like that. HTH

I Gede Made Wira Saputra wrote:

Hi All,

I have a problem with email configuration with gmail account. I use Elog V3.1.1 and Stuneel V5-32 with Windows 7 Profesional 64-bit

I follow the instruction in elog:68039 This is my configuration elogd.cfg and stunnel.conf

# My elogd.cfg

;Mail server configuration
smtp host = 127.0.0.1
SMTP username = <My_email_account>@gmail.com
SMTP Password = MjhNYXNrb2tpMjI=

Email encoding = 1
Logout to main = 1

# My Stunnel.conf

[gmail-pop3]
client = yes
accept = 127.0.0.1:110
connect = pop.gmail.com:995
verify = 2
CAfile = ca-certs.pem
checkHost = pop.gmail.com
OCSPaia = yes

[gmail-imap]
client = yes
accept = 127.0.0.1:143
connect = imap.gmail.com:993
verify = 2
CAfile = ca-certs.pem
checkHost = imap.gmail.com
OCSPaia = yes

[elogssl]
client = yes
accept = 127.0.0.1:25
connect = smtp.gmail.com:465
verify = 2
CApath = /etc/ssl/certs

[gmail-smtp]
client = yes
accept = 127.0.0.1:25
connect = smtp.gmail.com:465
verify = 2
CAfile = ca-certs.pem
checkHost = smtp.gmail.com
OCSPaia = yes

 

I got error "Error sending Email via <i>"127.0.0.1"</i>" when I run it.

Could somebody help me?

Thanks,

 

 

 

 

  68452   Tue Nov 15 07:29:04 2016 Reply Xuan Wuwux@ihep.ac.cnQuestionWindows3.1.1Re: How to configure email? "Error sending Email via <i>"127.0.0.1"</i>"

I use "SMTP username = <My_email_account>" without "@xxx" for my site. So you can try it like that. HTH

I Gede Made Wira Saputra wrote:

Hi All,

I have a problem with email configuration with gmail account. I use Elog V3.1.1 and Stuneel V5-32 with Windows 7 Profesional 64-bit

I follow the instruction in elog:68039 This is my configuration elogd.cfg and stunnel.conf

# My elogd.cfg

;Mail server configuration
smtp host = 127.0.0.1
SMTP username = <My_email_account>@gmail.com
SMTP Password = MjhNYXNrb2tpMjI=

Email encoding = 1
Logout to main = 1

# My Stunnel.conf

[gmail-pop3]
client = yes
accept = 127.0.0.1:110
connect = pop.gmail.com:995
verify = 2
CAfile = ca-certs.pem
checkHost = pop.gmail.com
OCSPaia = yes

[gmail-imap]
client = yes
accept = 127.0.0.1:143
connect = imap.gmail.com:993
verify = 2
CAfile = ca-certs.pem
checkHost = imap.gmail.com
OCSPaia = yes

[elogssl]
client = yes
accept = 127.0.0.1:25
connect = smtp.gmail.com:465
verify = 2
CApath = /etc/ssl/certs

[gmail-smtp]
client = yes
accept = 127.0.0.1:25
connect = smtp.gmail.com:465
verify = 2
CAfile = ca-certs.pem
checkHost = smtp.gmail.com
OCSPaia = yes

 

I got error "Error sending Email via <i>"127.0.0.1"</i>" when I run it.

Could somebody help me?

Thanks,

 

 

 

  68451   Tue Nov 15 04:42:49 2016 Question I Gede Made Wira Saputraigmadews@gmail.comQuestionWindows3.1.1How to configure email? "Error sending Email via <i>"127.0.0.1"</i>"

Hi All,

I have a problem with email configuration with gmail account. I use Elog V3.1.1 and Stuneel V5-32 with Windows 7 Profesional 64-bit

I follow the instruction in elog:68039 This is my configuration elogd.cfg and stunnel.conf

# My elogd.cfg

;Mail server configuration
smtp host = 127.0.0.1
SMTP username = <My_email_account>@gmail.com
SMTP Password = MjhNYXNrb2tpMjI=

Email encoding = 1
Logout to main = 1

# My Stunnel.conf

[gmail-pop3]
client = yes
accept = 127.0.0.1:110
connect = pop.gmail.com:995
verify = 2
CAfile = ca-certs.pem
checkHost = pop.gmail.com
OCSPaia = yes

[gmail-imap]
client = yes
accept = 127.0.0.1:143
connect = imap.gmail.com:993
verify = 2
CAfile = ca-certs.pem
checkHost = imap.gmail.com
OCSPaia = yes

[elogssl]
client = yes
accept = 127.0.0.1:25
connect = smtp.gmail.com:465
verify = 2
CApath = /etc/ssl/certs

[gmail-smtp]
client = yes
accept = 127.0.0.1:25
connect = smtp.gmail.com:465
verify = 2
CAfile = ca-certs.pem
checkHost = smtp.gmail.com
OCSPaia = yes

 

I got error "Error sending Email via <i>"127.0.0.1"</i>" when I run it.

Could somebody help me?

Thanks,

 

 

  68450   Mon Oct 31 09:51:02 2016 Question Peter Kpkravt@gmail.comQuestionWindows3.1.2Error starting elog 3.1.2 on Windows server

Hi,

I'm trying to upgrade ELOG 2.9.2, which I have been used many years, to the new version (3.1.2).

I can't run the new version even from the command line:

c:\Program Files (x86)\ELOG1>"c:\Program Files (x86)\ELOG1\elogd" -c "c:\Program Files (x86)\ELOG1\elogd.cfg"
Access is denied.

Message box appears with message:

c:\Program Files (x86)\ELOG1\elogd.exe is not a valid Win32 application.

What do I do wrong ?

I'm trying to use my old config file. New default config gave the same result :-(

  68449   Fri Oct 28 16:41:11 2016 Reply Stefan Rittstefan.ritt@psi.chQuestionAll3.1.1Re: Reset a user's password

Sure. Hit "Config", select other user, and click on "Change password".

Stefan

Val Schmidt wrote:

Is it possible for an administator to reset a user's password? 

Thanks,

Val

 

ELOG V3.1.5-3fb85fa6