| ID |
Date |
Icon |
Author |
Author Email |
Category |
OS |
ELOG Version |
Subject |
|
68435
|
Fri Sep 30 11:21:44 2016 |
 | Alex Kühnel | alexander.kuehnel@gmail.com | Question | Linux | 3.1.2 | Re: calculate diff of 2 date(s) |
I found the solution in the forum :-)
subst Einsatzzeit = $shell(/usr/local/elog/diff.sh \"$Einsatzbeginn\" \"$Einsatzende\")
and diff.sh is
#!/bin/sh
#set -x
s1=$(date -d "$1" +%s)
s2=$(date -d "$2" +%s)
d=$(echo "($s2-$s1)/60"|bc -lq)
printf "%.0f Minuten" $d
| Alex Kühnel wrote: |
|
hi
I have an elogsystem for documenting emergency services. I have a starttime and an endtime. Is it possible to calculate the diff between the 2 timestamps and convert it to minutes?
Attributes = Bereitschafts Kalender Woche, Bereitschafts Woche, Einsatzbeginn, Einsatzende, Einsatzzeit, Telefon Nummer, Station, Status, Problem
Options Status= Offen{1}, Erledigt{2}, Geschlossen{3}
......
Type Einsatzbeginn = datetime
Type Einsatzende = datetime
....
Subst Einsatzzeit = $shell(Einsatzende - Einsatzbeginn)
regards
/alex
|
|
|
68434
|
Wed Sep 28 18:48:04 2016 |
 | Alex Kühnel | alexander.kuehnel@gmail.com | Question | Linux | 3.1.2 | calculate diff of 2 date(s) |
hi
I have an elogsystem for documenting emergency services. I have a starttime and an endtime. Is it possible to calculate the diff between the 2 timestamps and convert it to minutes?
Attributes = Bereitschafts Kalender Woche, Bereitschafts Woche, Einsatzbeginn, Einsatzende, Einsatzzeit, Telefon Nummer, Station, Status, Problem
Options Status= Offen{1}, Erledigt{2}, Geschlossen{3}
......
Type Einsatzbeginn = datetime
Type Einsatzende = datetime
....
Subst Einsatzzeit = $shell(Einsatzende - Einsatzbeginn)
regards
/alex |
|
68433
|
Wed Sep 28 10:36:53 2016 |
 | Jackie Schwehr | jackie.schwehr@colostat.edu | Question | Linux | ELOG V2.9.2-245 | Using an RSS reader on a pasword protected elog |
I'm trying to set up a python rss parser to read the output from my collaboration's elog, however the elog is password protected and I cannot figure out how to have a python scrip get past the login screen. Is there something obvious I'm missing that will allow a parser to submit a username and password? If that's too python-specific of a question for this audience, then what is the exact security method elog uses, so I can get information on that? I've read through the documentation and either I don't know what I'm reading (likely) or I'm not looking in the right spot. |
|
Draft
|
Wed Sep 28 10:27:24 2016 |
| Jackie Schwehr | jackie.schwehr@colostat.edu | Question | Linux | ELOG V2.9.2-245 | Using an RSS reader on a pasword protected elog |
I'm trying to set up a python rss parser to read the output from my collaboration's elog, however the elog is password protected and I cannot figure out how to have a python scrip get past the login screen. Is there something obvious I'm missing that will allow a parser to submit a username and password? If that's too python-specific of a question for this audience, then what is the exact security method elog uses, so I can get information on that? I've read through the documentation and either I don't know what I'm reading (likely) or I'm not looking in the right spot. |
|
68431
|
Fri Sep 23 23:38:28 2016 |
| Matthew Sauder | matthew.sauder@saskcancer.ca | Question | Windows | 3.1.0-c701f01 | Re: FCKEditor not working correctly on a Windows server. |
I know I'm a little late but is there a way to do this from elog? I've tried using the following line in the config but it doesn't seem to work in IE10. I figure if there is a way to modify the <head> before the page loads there could be hope.
Top text = <script>var meta = document.createElement('meta');meta.httpEquiv = "X-UA-Compatible";meta.content = "IE=edge";var head = document.getElementsByTagName('head')[0];head.insertBefore(meta, head.firstChild);</script>
| Richard Stamper wrote: |
|
If you are using IE as your browser, the problem may be with that rather than the server. By default IE 11 display intranet sites in a "Compatibility mode" which breaks the FCKEditor in Elog version 3. Fortunately this mode can be disabled, which is what I have had to advise users here to do.
- Click on the "cogwheel" and select "Compatibility settings"
- Deselect "Display intranet sites in Compatibility view"
Pictures attached
| Marty Jansen wrote: |
|
Sorry for the late reply. I have installed a slightly newer version of Elog, but the results are the same. I do get de the 3 editor bars, but the top 2 are greyed out and the bottom one doesn't do anything if clicked. I have commented out the lines that refer to the online equation editor, but that doesn't help much either. I think I let it rest. The old 2.9.xx version still works great, so we leave it at that.
Thanks anyway for the suggestions
Marty
| Marty Jansen wrote: |
|
Hi,
After working many years with previous versions of ELOG, I decided to update to the latest version.
I have installed ELOG version 3.1.0 on a WIndows 2012R2 server with IE 1. The editor is showing up, but everything is greyed out, execpt for some items on the bottom row. (Style, Lettertype...) and after I do load a preset text form with different colors, the page remains white. The tables and text in the form is showing up.
The previous version with the older editor was working great on the same server.
Any suggestions?
|
|
|
|
|
68430
|
Thu Sep 22 14:45:17 2016 |
| Christina Swinson | cswinson@bnl.gov | Question | Linux | 3.1.1 | Re: How do I use Preset Text only when a given topic is selected? |
Awesome! Thanks Andeas.
| Andreas Luedeke wrote: |
|
Hi Christina,
You want to use "conditional attributes". See elog:68350 for an example. Cheers, Andreas
| Christina winson wrote: |
|
Hi,
I'm looking to use a template for only a subset of logbook entries. Is there some way to apply a template when a specific topic or category is selected?
Help for the newbie much appreciated.
Christina
|
|
|
|
68429
|
Thu Sep 22 09:56:49 2016 |
| Andreas Luedeke | andreas.luedeke@psi.ch | Question | Linux | 3.1.1 | Re: How do I use Preset Text only when a given topic is selected? |
Hi Christina,
You want to use "conditional attributes". See elog:68350 for an example. Cheers, Andreas
| Christina winson wrote: |
|
Hi,
I'm looking to use a template for only a subset of logbook entries. Is there some way to apply a template when a specific topic or category is selected?
Help for the newbie much appreciated.
Christina
|
|
|
68428
|
Wed Sep 21 18:58:18 2016 |
| Christina winson | cswinson@bnl.gov | Question | Linux | 3.1.1 | How do I use Preset Text only when a given topic is selected? |
Hi,
I'm looking to use a template for only a subset of logbook entries. Is there some way to apply a template when a specific topic or category is selected?
Help for the newbie much appreciated.
Christina |