| ID |
Date |
Icon |
Author |
Author Email |
Category |
OS |
ELOG Version |
Subject |
|
1940
|
Mon Sep 18 22:09:23 2006 |
 | Steve Jones | steve.jones@freescale.com | Bug report | Other | 2.6.2-1714 | Re: SVN1714 will not run in 'daemon" mode on Solaris8 |
| Steve Jones wrote: | | On Solaris, SVN1714 will not go into daemon mode. Running the compiled version under TRUSS (which provides a dump of every system call) and shows precisely where elog is failing. I have attached two TRUSS outputs: one where it errors out and the other where it runs but "interactively". Both runs are as root, simply one with and one without the "-D" |
| Quote: |
As a followon, when I do run SVN1714 as a detached process but started as ROOT I get the following console messages:
Cannot restore original GID/UID.
Cannot restore original GID/UID.
Cannot restore original GID/UID.
Cannot restore original GID/UID.
Cannot restore original GID/UID.
Cannot restore original GID/UID.
Cannot restore original GID/UID.
I do not get these when I run the app as me - which is a non-UID 0 account. Perhaps this is an artifact of the "-x" option?
|
|
|
1941
|
Tue Sep 19 17:32:28 2006 |
| Stefan Ritt | stefan.ritt@psi.ch | Question | All | 2.6.2-1714 | Re: Re: Why are Preset fields blanked out? |
| Steve Jones wrote: |
I think I found it. Try this:
Locked Attributes = ApprovedDate, CompletedDate
##################################################
# Define CRState
#
Options CRState = PENDING{a}, APPROVED{b}, HOLD{a}, REJECTED{a}, COMPLETED{c}
{a}
{b} Preset ApprovedDate = $date
{c} Preset CompletedDate = $date
In my config when I remove the two attributes from "LOCKED ATTRIBUTES" the fields do not get blanked out.
|
No, even with that it does not get blanked out. Attached is the complete elogd.cfg with which it works fine in my case (R1714). Can you try that? |
| Attachment 1: elogd.cfg
|
[global]
port = 8080
[demo]
Comment = Test
Attributes = Author, CRState, ApprovedDate, CompletedDate
Locked Attributes = ApprovedDate, CompletedDate
Options CRState = PENDING{a}, APPROVED{b}, HOLD{a}, REJECTED{a}, COMPLETED{c}
{a}
{b} Preset ApprovedDate = $date
{c} Preset CompletedDate = $date
|
|
1942
|
Tue Sep 19 19:22:31 2006 |
| Steve Jones | steve.jones@freescale.com | Question | All | 2.6.2-1714 | Re: Re: Why are Preset fields blanked out? |
| Stefan Ritt wrote: |
| Steve Jones wrote: |
I think I found it. Try this:
Locked Attributes = ApprovedDate, CompletedDate
##################################################
# Define CRState
#
Options CRState = PENDING{a}, APPROVED{b}, HOLD{a}, REJECTED{a}, COMPLETED{c}
{a}
{b} Preset ApprovedDate = $date
{c} Preset CompletedDate = $date
In my config when I remove the two attributes from "LOCKED ATTRIBUTES" the fields do not get blanked out.
|
No, even with that it does not get blanked out. Attached is the complete elogd.cfg with which it works fine in my case (R1714). Can you try that? |
| Quote: |
Stefan, when I try that config in a demo logbook in my installation *but with all other items in [global] I get the same field-blanking behavior. I am going to try going back to a completely pristine .cfg, but I suspect this will work fine. I will need to add back in configuration items until I run into the culprit.
Ok, I found it. Try this config:
[global]
port = 8080
[demo]
Comment = Test
Attributes = Author, CRState, ApprovedDate, CompletedDate
Locked Attributes = ApprovedDate, CompletedDate
Type CompletedDate = date
Type ApprovedDate = date
Format CompletedDate = 1
Options CRState = PENDING{a}, APPROVED{b}, HOLD{a}, REJECTED{a}, COMPLETED{c}
{a}
{b} Preset ApprovedDate = $date
{c} Preset CompletedDate = $date
Setting the "Type" to "date" causes the blanking to occur.
|
|
|
1943
|
Tue Sep 19 20:28:15 2006 |
| Stefan Ritt | stefan.ritt@psi.ch | Question | All | 2.6.2-1714 | Re: Re: Why are Preset fields blanked out? |
| Steve Jones wrote: |
Setting the "Type" to "date" causes the blanking to occur.
|
Ok, then don't set the "Type" to "date"  |
|
1945
|
Tue Sep 19 20:38:49 2006 |
| Steve Jones | steve.jones@freescale.com | Question | All | 2.6.2-1714 | Re: Re: Why are Preset fields blanked out? |
| Stefan Ritt wrote: |
| Steve Jones wrote: |
Setting the "Type" to "date" causes the blanking to occur.
|
Ok, then don't set the "Type" to "date" |
| Quote: |
Yuk! Thanks!
|
|
|
1946
|
Fri Sep 22 07:42:57 2006 |
| Stefan Ritt | stefan.ritt@psi.ch | Bug report | Other | 2.6.2-1714 | Re: Shell execution generating error |
| Steve Jones wrote: | When started as root *but not running as a daemon* shell execution results in the following errors that are sent to Standard Error:
Cannot restore original GID/UID.
Cannot remove pidfile "/var/run/cr-elogd.pid"
; Permission denied
Cannot restore original GID/UID.
Cannot remove pidfile "/var/run/cr-elogd.pid"
; Permission denied
|
The "/var/run/elogd.pid" file is created from elogd to indicate under which PID it is running. If you run elogd once under root, this file then belongs to root. If you afterwards run it under a user account, it cannot delete or change the file belonging to root. In that case, just delete that file manually. |
|
1947
|
Fri Sep 22 07:47:58 2006 |
| Stefan Ritt | stefan.ritt@psi.ch | Bug report | Other | 2.6.2-1714 | Re: SVN1714 will not run in 'daemon" mode on Solaris8 |
| Steve Jones wrote: | | On Solaris, SVN1714 will not go into daemon mode. Running the compiled version under TRUSS (which provides a dump of every system call) and shows precisely where elog is failing. I have attached two TRUSS outputs: one where it errors out and the other where it runs but "interactively". Both runs are as root, simply one with and one without the "-D" |
The "one where it errors out" does not look like an error. It does the "fork()" at the end and the main thread ends, that's how it's supposed to be. |
|
1948
|
Fri Sep 22 07:50:39 2006 |
| Stefan Ritt | stefan.ritt@psi.ch | Question | All | 2.6.2-1714 | Re: "Supress Email Notification" checkbox |
| Steve Jones wrote: |
| Steve Jones wrote: | | Is there a way to allow email notification but have the "Suppress Email Notification" checked by default? We had complaints about the enormous amount of email so I turned off email notification for edits/replys, but there are times that I would like to allow email to be sent out -- this would imply allowing email by unchecking the "Suppress" box. |
What I think would be needed is:
Suppress Email on edit = 0|1|2
^
Where a '2' denotes that the "Suppress Email Notification" shows up but *checked* |
Just to a
Suppress default = 1 |