| ID |
Date |
Icon |
Author |
Author Email |
Category |
OS |
ELOG Version |
Subject |
|
1663
|
Wed Feb 8 15:29:03 2006 |
 | Stefan Ritt | stefan.ritt@psi.ch | Question | Linux | | Re: email problems |
| Chris Warner wrote: | Error sending Email via "xxx.xxx.xxx.xx": Syntax error, parameters in command "MAIL FROM: christopher_warner@xxx.gov SIZE=1985" unrecognized or missing
|
There are two possible reasons:
1) The email address "christopher_warner@xxx.gov" is invalid. Some SMTP server immediately complain about invalid email addresses and refuse to send any mail then. In that case just supply an existing email address or remove that test account.
2) The SMTP server does not like the "SIZE=xxx" option. This comes from a single line in elogd.c:
snprintf(str, strsize - 1, "MAIL FROM: %s SIZE=%d\r\n", from, strlen(text));
you could just go there and remove the " SIZE=%d", so that the line looks like:
snprintf(str, strsize - 1, "MAIL FROM: %s\r\n", from);
to see if that makes any difference. |
|
1667
|
Wed Feb 8 18:38:30 2006 |
| Chris Warner | christopher_warner@dcd.uscourts.gov | Question | Linux | | Re: email problems |
The email address id correct. I am using an Elog Binary. I don't have the source code .
Chris Warner
| Stefan Ritt wrote: |
| Chris Warner wrote: | Error sending Email via "xxx.xxx.xxx.xx": Syntax error, parameters in command "MAIL FROM: christopher_warner@xxx.gov SIZE=1985" unrecognized or missing
|
There are two possible reasons:
1) The email address "christopher_warner@xxx.gov" is invalid. Some SMTP server immediately complain about invalid email addresses and refuse to send any mail then. In that case just supply an existing email address or remove that test account.
2) The SMTP server does not like the "SIZE=xxx" option. This comes from a single line in elogd.c:
snprintf(str, strsize - 1, "MAIL FROM: %s SIZE=%d\r\n", from, strlen(text));
you could just go there and remove the " SIZE=%d", so that the line looks like:
snprintf(str, strsize - 1, "MAIL FROM: %s\r\n", from);
to see if that makes any difference. |
|
|
1670
|
Thu Feb 9 09:09:30 2006 |
| Stefan Ritt | stefan.ritt@psi.ch | Question | Linux | | Re: email problems |
| Chris Warner wrote: | | The email address id correct. I am using an Elog Binary. I don't have the source code. |
Ok, so I removed the SIZE=xxx parameter, which is not strictly necessary anyhow I believe. So wait for the next release, and you can try. |
|
1682
|
Fri Feb 10 21:26:33 2006 |
 | Chris Warner | christopher_warner@dcd.uscourts.gov | Question | Linux | | Re: email problems |
Do you have an ise when that will be?
| Stefan Ritt wrote: |
| Chris Warner wrote: | | The email address id correct. I am using an Elog Binary. I don't have the source code. |
Ok, so I removed the SIZE=xxx parameter, which is not strictly necessary anyhow I believe. So wait for the next release, and you can try. |
|
|
1683
|
Fri Feb 10 21:50:27 2006 |
| Stefan Ritt | stefan.ritt@psi.ch | Question | Linux | | Re: email problems |
| Chris Warner wrote: | | Do you have an ise when that will be? |
In about a week from now. |
|
184
|
Sat Jan 4 20:16:32 2003 |
| Stefan Ritt | stefan.ritt@psi.ch | Question | | | Re: email notification to a specific adress |
> I have some problem with email notification
> for some logbooks I would like to notify only to specific adress
> I try
> Email All = adress1, adress2
>
> Elog send well at 'adress1' and 'adress2'
> but also to all of other users ?
> how to restric these only to 'adress1 and adress2 ?
Some implementations rely on the fact the email is sent to all users plus a
few other addresses. What I can do is put in another flag like "Supress
email to users = 1" which would satisfy both requirements.
> is it possible to notify according to attribue value like
>
> Attributes = Test1, Test2
> Email All = $Test1
>
> or concatenation of $Test1 + '@mba.be' for example
This is not possible right now, but I can put it on the wishlist.
> to improve documentation : true example are missing too much 'theorie'
> but when I'm finish I'll put true sample on the net
I fully agree, so if someone has nice examples, I'm delighted to put them
into an "examples" section of the documentation.
- Stefan |
|
69157
|
Mon Jun 8 08:11:33 2020 |
| Stefan Ritt | stefan.ritt@psi.ch | Question | Linux | 3.1.4-4936b76 | Re: email notification for self register 2 3 and 4 |
Why don't you start elogd interactively with the "-v" flag (verbose) and watch the communication between elog and postfix. Maybe you see a specific error there.
Stefan
| pierre brionnet wrote: |
|
Hi,
I have set up my elog for testing and setup postfix to be able to send email notification for register of new user but whatever i try elog cannot set email. I try to sent test email in my bash and this is working without problem to my gmail account.
I have tried several configuration for my smtp client on my centos 7 but nothing is working in elog for the email. I also tried with several other email but no change either.
Is there a problem with the automatic sending of email ?
Best
Pierre
|
|
|
69158
|
Mon Jun 8 08:29:16 2020 |
| pierre brionnet | pierre.brionnet@gmail.com | Question | Linux | 3.1.4-4936b76 | Re: email notification for self register 2 3 and 4 |
Hi Stefan, I did run in verbose mode but only got this output with the 587 SMTP port from gmail
Email from <ELog@localhost.localdomain> to XXXX@gmail.com, SMTP host smtp.gmail.com:
220 smtp.gmail.com ESMTP n1sm6153685pfd.156 - gsmtp
EHLO localhost.localdomain
250-smtp.gmail.com at your service, [134.160.38.27]
250-SIZE 35882577
250-8BITMIME
250-STARTTLS
250-ENHANCEDSTATUSCODES
250-PIPELINING
250-CHUNKING
250 SMTPUTF8
AUTH LOGIN
530 5.7.0 Must issue a STARTTLS command first. n1sm6153685pfd.156 - gsmtp
However the mail command in my bash is working juste fine
Pierre
| Stefan Ritt wrote: |
|
Why don't you start elogd interactively with the "-v" flag (verbose) and watch the communication between elog and postfix. Maybe you see a specific error there.
Stefan
| pierre brionnet wrote: |
|
Hi,
I have set up my elog for testing and setup postfix to be able to send email notification for register of new user but whatever i try elog cannot set email. I try to sent test email in my bash and this is working without problem to my gmail account.
I have tried several configuration for my smtp client on my centos 7 but nothing is working in elog for the email. I also tried with several other email but no change either.
Is there a problem with the automatic sending of email ?
Best
Pierre
|
|
|