/usr/bin/install -m 0755 -d /usr/local/bin /usr/local/sbin /usr/local/man/man1/ /usr/local/man/man8/
/usr/bin/install -m 0755 -o bin -g bin elog elconv /usr/local/bin
install: bin: Invalid argument
make: *** [install] Error 67

ifeq ($(OSTYPE),darwin)
CC = cc
endif

diff Makefile.darwin Makefile.origin
====================================
24,25d23
< BINOWNER = bin
< BINGROUP = bin
30,31d27
< OSTYPE = $(shell uname)
<
40,43d35
< ifeq ($(OSTYPE),Darwin)
< OSTYPE=darwin
< endif
<
46,47d37
< BINOWNER = root
< BINGROUP = admin
89,90c79,80
<       $(INSTALL) -m 0755 -o ${BINOWNER} -g ${BINGROUP} elog elconv $(DESTDIR)
<       $(INSTALL) -m 0755 -o ${BINOWNER} -g ${BINGROUP} elogd $(SDESTDIR)
---
>       $(INSTALL) -m 0755 -o bin -g bin elog elconv $(DESTDIR)
>       $(INSTALL) -m 0755 -o bin -g bin elogd $(SDESTDIR)

1. eloglang.zh_CN-GB2312 : This is for simplified Chinese using GB2312 encoding.
   
2. eloglang.zh_CN-UTF-8 : This is for simplified Chinese using UTF-8 encoding.
   
3. eloghelp.zh-CN.html : Help file for elog in simplified Chinese.
   
4. elcode_zh-CN.html : The help file for ELCode in simplified Chinese.
   
5. elogd-zh_CN-GB2312.cfg : Demo configuration file for simplified Chinese with GB2312 encoding.
   
6. elogd-zh_CN-UTF-8.cfg : Demo configuration file for simplified Chinese with UTF-8 encoding.
   

• I can visit remote elog service through IP and port, but cannot submit entry and cannot open the config page remotely. For example, my powerbook's name is "exaos-pb-12" and its IP is 10.10.2.96. I run elogd on my PB and try to access it through URL http://10.10.2.96:8080/ on host 10.10.2.99. While I submit a new entry or open the config page, my firefox alway blames: "exaos-pb-12.local could not be found. Please check the name and try again."
  
• Sometimes, all the images, colors are missing. It looks like that my firefox cannot find the correct URL of these images or CSS files. It might be the same problem of "cannot find hostname".
  

• Use the new ViewCVS gateway. This gateway now can also directly produce tarballs for the current repository snapshot
  
• Use anonymous Subversion access:
  
  svn checkout svn+ssh://svn@savannah.psi.ch/afs/psi.ch/project/meg/svn/elog/trunk elog
  svn@midas.psi.ch's password: svn
  (you might have to enter the password several times...)
  svn checkout svn+ssh://svn@savannah.psi.ch/afs/psi.ch/project/meg/svn/mxml/trunk mxml
  svn@midas.psi.ch's password: svn
  (you might have to enter the password several times...)