Hello,

I downloaded the latest file and installed but the version number stayed at 
2.5.8-2 and did not change to -3. I stopped and restarted the service and 
reinstalled a couple of times as this is just a demo experimental base I 
had it overwrite everything, but it stilled stayed the same.

Also is there a way to change the display of the default date. It uses 
allot of space in the date column.

Thanks

David Egolf

> I downloaded the latest file and installed but the version number stayed at 
> 2.5.8-2 and did not change to -3.

Sorry I forgot to increase the version number in the source code. So don't worry.

> Also is there a way to change the display of the default date. It uses 
> allot of space in the date column.

Date format = %A, %B %d

see manual!

Segmentation fault when searching for empty regex
--------------------------------------------------

Searching for a regex like 'm*', which also includes zero 'm's, an empty
expression is found indefinitely in 'highlight_searchtext(...)', which 
eventually results in an overflow of 'pt1'.  The patch below fixes this
particular problem, but I would guess there are many other regular 
expressions that would lead to an overflow of 'pt1', so its size
should definitely be checked before every 'strcpy(pt1,...)' and
the loop be aborted accordingly.  (Or 'pt1' should be allocated 
and enlarged dynamically.)

*** 14777,14782 ****
--- 14777,14784 ----
        if (status != REG_NOMATCH) {
           size = pmatch[0].rm_so;
  
+        if (size == 0) break; /* check for zero size -> infinite loop */
+ 
           /* copy first part original text */
           memcpy(pt1, pt, size);
           pt1 += size;
***************
*** 14788,14795 ****
--- 14790,14799 ----
           /* see also rsputs2(char* ) */
  
           if (hidden)
+          /* need to check size of pt1 !!! */
              strcpy(pt1,
"\001B\004style=\003color:black;background-color:#ffff66\003\002");
           else
+          /* need to check size of pt1 !!! */
              strcpy(pt1, "<B style=\"color:black;background-color:#ffff66\">");
  
           pt1 += strlen(pt1);
***************
*** 14802,14814 ****
--- 14806,14821 ----
  
           /* add coloring 2nd part */
           if (hidden)
+          /* need to check size of pt1 !!! */
              strcpy(pt1, "\001/B\002");
           else
+          /* need to check size of pt1 !!! */
              strcpy(pt1, "</B>");
           pt1 += strlen(pt1);
        }
     } while (status != REG_NOMATCH);
  
+    /* need to check size of pt1 !!! */
     strcpy(pt1, pt);
  }

I applied a similar fix like you proposed, just omit highlighting at all if I get a
zero length match. Changes committed to CVS.

I was upgrading to the latest version and I wrote over my cfg file. I 
still have my database files. Is there a way to put the cfg file back 
together using the database files as a guide.  It did not seem to want to 
upgrade until I did this and I forgot to copy and then paste the cfg files 
back.  The latest version is now running. Before I did this I was still 
getting the old version number at the bottom of the main screen.  Also I 
have an RSS reader that can do user name and password, is this possible 
with Elog if the RSS reader has the ability?

Thanks

I guess this qualifies as two questions.

David Egolf

> I was upgrading to the latest version and I wrote over my cfg file. I 
> still have my database files. Is there a way to put the cfg file back 
> together using the database files as a guide.  It did not seem to want to 
> upgrade until I did this and I forgot to copy and then paste the cfg files 
> back.  The latest version is now running. Before I did this I was still 
> getting the old version number at the bottom of the main screen.  Also I 
> have an RSS reader that can do user name and password, is this possible 
> with Elog if the RSS reader has the ability?

I put an extra dialog box into the installer to prevent overwriting the
original config file, but unfortunately I cannot prevent people from shooting
themselves into the foot (;-)

The database files contain at least the attributes. Just open any file with a
text editor. But the other settings, like "preset <attribute>" etc. are lost.

Concerning teh RSS authentication, I willing to implement this if you tell me
which reader you are using, so that I can test it. You could also try yourself,
maybe it works without modification. What you would need is public read access
via "Guest menu commands" option plus a "Read password". The read password
prevents again the public read access, but the RSS reader can maybe submit it.
What the RSS reader certainly cannot do is to fill out the "Login" screen of
elog, so you need the "Guest menu commands" for sure.

- Stefan

> > I was upgrading to the latest version and I wrote over my cfg file. I 
> > still have my database files. Is there a way to put the cfg file back 
> > together using the database files as a guide.  It did not seem to want to 
> > upgrade until I did this and I forgot to copy and then paste the cfg files 
> > back.  The latest version is now running. Before I did this I was still 
> > getting the old version number at the bottom of the main screen.  Also I 
> > have an RSS reader that can do user name and password, is this possible 
> > with Elog if the RSS reader has the ability?
> 
> I put an extra dialog box into the installer to prevent overwriting the
> original config file, but unfortunately I cannot prevent people from shooting
> themselves into the foot (;-)
> 
> The database files contain at least the attributes. Just open any file with a
> text editor. But the other settings, like "preset <attribute>" etc. are lost.
> 
> Concerning teh RSS authentication, I willing to implement this if you tell me
> which reader you are using, so that I can test it. You could also try yourself,
> maybe it works without modification. What you would need is public read access
> via "Guest menu commands" option plus a "Read password". The read password
> prevents again the public read access, but the RSS reader can maybe submit it.
> What the RSS reader certainly cannot do is to fill out the "Login" screen of
> elog, so you need the "Guest menu commands" for sure.
> 
> - Stefan

Hello,

Thank you so much for working with me on this.  The RSS reader I have been trying 
is at http://www.rssreader.com   and is version 1.0.88.0  It is a free RSS reader 
and seems to work very well.  It has a username and password system, but I am not 
sure what and how it will support with ELog. I have been successful in reading an 
open logbook with no passwords.  

Thanks again,

David Egolf

> Thank you so much for working with me on this.  The RSS reader I have been trying 
> is at http://www.rssreader.com   and is version 1.0.88.0  It is a free RSS reader 
> and seems to work very well.  It has a username and password system, but I am not 
> sure what and how it will support with ELog. I have been successful in reading an 
> open logbook with no passwords.  

rssreader supports HTTP authentication. So what you have to do is to define a "read
password". Open a dos box, navigate to your elog directory, and enter

elogd -l <logbook> -r <password>

replace <logbook> with your real logbook name and <password> with any password. This
command modifies elogd.cfg and puts your password there in encrypted form.

Next, tell rssreader to use authentication and enter there your password
(authetication name does not matter). See the attachment. Rssreader will then be able
to connect properly to your logbook.

Hello,
I have been running Elog for a long time on a variety of RedHat releases,
(this is a terrific project by the way). Currently running Elog v2.5.7 on 
RedHat (Fedora Core-II) and most is working great excepting being able to 
modify the default fonts being used by Elog when trying to write and save 
in text mode while in Elog's main editing screen. 

On my setup the font size is way too small and to work around this problem 
I write and save everything in HTML mode. I've browsed the Elog css file 
but don't yet see where or how to properly set the default font style or 
size for the main screen in the editor. Can you shed some light on this for 
me?

--
Regards, Greg

> Hello,
> I have been running Elog for a long time on a variety of RedHat releases,
> (this is a terrific project by the way). Currently running Elog v2.5.7 on 
> RedHat (Fedora Core-II) and most is working great excepting being able to 
> modify the default fonts being used by Elog when trying to write and save 
> in text mode while in Elog's main editing screen. 
> 
> On my setup the font size is way too small and to work around this problem 
> I write and save everything in HTML mode. I've browsed the Elog css file 
> but don't yet see where or how to properly set the default font style or 
> size for the main screen in the editor. Can you shed some light on this for 
> me?

The text style of the main message text is defined in the following lines in the
CSS field:

.messagepre {
  font-family:'lucida console',courier,monospace;
  font-size:10pt;
}

Locate these lines and change 10pt to 12pt or even 14pt.

I have a question about sending emails. I have a customer service ELog 
currently running but I would like to have an option to be able to pick 
from a list of people, one or more than one to send emails to with the 
logbook entry as the body.  I am currently using the email option to send 
emails to a list if an emergency is used in a category but I would like to 
be able to send the entry to different people at different times.  I would 
have everyone pre-entered with their names and emails and you could check 
a box by the person or people you want the log entry sent.  I wasn't sure 
if this is possible with the current system. 

Thanks for any input.

David Egolf

PS. The emails are actually email enabled cell phones so the cs entries 
are going to drivers who pick up and drop off work for the company. 

> I have a question about sending emails. I have a customer service ELog 
> currently running but I would like to have an option to be able to pick 
> from a list of people, one or more than one to send emails to with the 
> logbook entry as the body.  I am currently using the email option to send 
> emails to a list if an emergency is used in a category but I would like to 
> be able to send the entry to different people at different times.  I would 
> have everyone pre-entered with their names and emails and you could check 
> a box by the person or people you want the log entry sent.  I wasn't sure 
> if this is possible with the current system. 

It is. Put an MOptions in you config file, and then put individual email
statements there. Like

Attributes = ..., Notify
MOptions Notify = Joe, Jack, Jim
Email Notify Joe = joe@fujicolor.com
Email Notify Jack = jack@fujicolor.com
Email Notify Jim = jim@fujicolor.com

What this does it give you a checkbox for each name. If the check box is
checked, then the corresponding email statement is executed. Note that the
email address does not have to correspond to the "Notify" value. You could also
use completely different names, like "MOptions Notify = Security, Police,
Admin", and then put some email address from specific people there.

So subscribe to ELOG RSS feeds, do the following:

- In Thunderbird, click "Tools/Account setting", then click "Add account",
"RSS News & Blogs", "Next", "Finish", "Ok".

- Select "News & Blogs" in the "Folders" pane, right-click and select
"Properties"

- Click on "Manage Subscriptions..."

- Click on "Add"

- Enter the Feed URL of elog. Use your logbook URL and add "elog.rdf". For
this forum for example, enter

http://midas.psi.ch/elogs/Forum/elog.rdf

- Click OK. That's all.

See how the RSS feed shows up in the attached image. Please note that you
need public read access to your logbook for this to work (via "Guest menu
commands"), since the RSS mechanism does not support authentication.

When I upload a HTML-File as attachement the file is shown as the
HTML-source and not as the formatted text. Is there a possibility to see the
HTML-attachements as formatted text like images are shown as images?

> When I upload a HTML-File as attachement the file is shown as the
> HTML-source and not as the formatted text. Is there a possibility to see the
> HTML-attachements as formatted text like images are shown as images?

I could turn the ASCII display off, but the result is not always what you want.
If you have a HTML file without the <html>, <header> and <body> tags, it's ok.
But if you have these tags in your HTML (and this is the normal case), the
resulting page has these tags twice, once from the ELOG page and once from the
attachment. This confuses some browsers, so the resulting page might look
strange. A solution would be to strip these tags from the attachment, but for
that I would have to interprete the HTML attachment completely, which is too
much work.

So I will turn the ASCII display off in the next release, but be prepared to see
some nonexpected results.

Yesterday I mad a little experiment:
I copied in OpenOffice the content from my HTML file, which was not shown correctly
in ELOG, to a new HTML file, uploaded it in ELOG, and now my file was shown
correctly formatted. The only one problem is that not all lines are shown, in the
last line is written ...1753 more lines... . How can I show all lines? Do I have to
recompile ELOG?

> Yesterday I mad a little experiment:
> I copied in OpenOffice the content from my HTML file, which was not shown correctly
> in ELOG, to a new HTML file, uploaded it in ELOG, and now my file was shown
> correctly formatted. The only one problem is that not all lines are shown, in the
> last line is written ...1753 more lines... . How can I show all lines? Do I have to
> recompile ELOG?

The reason for the "...1753 more lines..." is the following: Sometimes people upload
really huge files (10 MB or so). If they are displayed as ASCII attachments, each time
you access the entry you have to DOWNLOAD 10 MB. Sometimes even the browser crashes.
That's why I limited the display of the ASCII attachments to the first 1000 lines. To
see the complete file, just lick on the attachment name.

Concerning the inline display of HTML documents, I'm currently thinking of checking if
there is an <HTML> or <BODY> statement inside the file. If not, it might be just some
HTML fraction in which case it could be shown. If yes, it cannot be shown inline, but
if you click on it's name a new browser windows is opened containing the full document.
Does that sound reasonable to you?

Ok, I turned display of HTML attachments completely off in 2.5.8-3. So if one wants to see
it, on has to click on it. Otherwise there is no way to ensure a correct web page, so
people would complain again that the page does not pass the HTML validator if someone
attached an invalid HTML file.

I think this is reasonable. All the HTML-files which I want insert (created with the software
INCA) are not shown correctly. My testfiles made with OpenOffice are shown correctly. Maybe
you have the time to program an option for the attachement "Show inside/Show in new window or
tab", so that the user can choose, how his HTML file is shown. Similiar to the option "Submit
as HTML text".

> I think this is reasonable. All the HTML-files which I want insert (created with the software
> INCA) are not shown correctly. My testfiles made with OpenOffice are shown correctly. Maybe
> you have the time to program an option for the attachement "Show inside/Show in new window or
> tab", so that the user can choose, how his HTML file is shown. Similiar to the option "Submit
> as HTML text".

I changed it such that all attachment are shown in a separate browser window if clicked. Hope
this satisfies most people. I believe an extra switch in the config file is too much for this
little thing, unless someone absolutely wants back the old behaviour.

I upgraded from ver 2.5.5-2 to 2.5.8-2 and found that none of my preset text
worked any longer.  I struggled with it for several hours and then reverted
back to 2.5.5-2 and the preset text worked again.  I have attached my
elgd.cfg file for review.  Thanks in advance for your help...

> I upgraded from ver 2.5.5-2 to 2.5.8-2 and found that none of my preset text
> worked any longer.  I struggled with it for several hours and then reverted
> back to 2.5.5-2 and the preset text worked again.  I have attached my
> elgd.cfg file for review.  Thanks in advance for your help...

Your config file really helped. You found a bug which happens only if one uses
conditions with lowercase letters, so that's why nobody else saw it before. I
fixed it and released V2.5.8-3

> > I upgraded from ver 2.5.5-2 to 2.5.8-2 and found that none of my preset text
> > worked any longer.  I struggled with it for several hours and then reverted
> > back to 2.5.5-2 and the preset text worked again.  I have attached my
> > elgd.cfg file for review.  Thanks in advance for your help...
> 
> Your config file really helped. You found a bug which happens only if one uses
> conditions with lowercase letters, so that's why nobody else saw it before. I
> fixed it and released V2.5.8-3

Thanks for the information.

ELOG is terrific!