So you are telling me that "Restrict edit time" is not working correctly? In order to fix any problem, I have to reproduce it. Can you post a minimel elogd.cfg file with which I can reproduce the problem?

Stefan

I ask my users where they had the problems and then create a demo for testing.
Thanks Heinz

Stefan, will send the info off this forum.

Heinz

Ok, I found the issue. The "Restrict edit time" is only checked when one clicks on "Edit" in the browser. The elog command line tool does not really an edit, but just submits an entry with an (old) ID. I added a check also for that case so now it should work. The commit is in git.

Stefan

> i

> is there a way to set up a logbook so that a password is required to get
> into it, but no username?

Have a look under "Access control" in the manual. What you need is "Read
Password".

> > is there a way to set up a logbook so that a password is required to get
> > into it, but no username?
> 
> Have a look under "Access control" in the manual. What you need is "Read
> Password".

thanks. that seems to get me the functionality i needed. is there any way to
get rid of the username line when using the "Read Password" feature? as it is
now, you can either leave it blank or enter anything you want, so long as you
use the correct password it still works. however, to keep users from getting
confused, i think it would be better to only have a box asking you for the
password and not both the password and username.

> thanks. that seems to get me the functionality i needed. is there any way to
> get rid of the username line when using the "Read Password" feature?

No, this is an HTTP standard. The dialog box is generated by your browser, and I
do not know any way to prevent it.