ELOG Forum

Format G1 = 0,attribgainname,attribvalue,10,10
Format G2 = 1,attribgainname,attribvalue,10,10
Format G3 = 1,attribgainname,attribvalue,10,10
Format G4 = 1,attribgainname,attribvalue,10,10
Format G5 = 1,attribgainname,attribvalue,10,10
Format G6 = 1,attribgainname,attribvalue,10,10
Format G7 = 1,attribgainname,attribvalue,10,10
Format G8 = 1,attribgainname,attribvalue,10,10

; start a new line I1,I2...I8

Format I1 = 0,attribgainname,attribvalue,10,10
Format I2 = 1,attribgainname,attribvalue,10,10
Format I3 = 1,attribgainname,attribvalue,10,10
Format I4 = 1,attribgainname,attribvalue,10,10
Format I5 = 1,attribgainname,attribvalue,10,10
Format I6 = 1,attribgainname,attribvalue,10,10
Format I7 = 1,attribgainname,attribvalue,10,10
Format I8 = 1,attribgainname,attribvalue,10,10

Stefan Ritt wrote:

The 'attribmainname' is only used for the display page, not for the entry form.

ok so if you say it is not a bug i can understand but in that case the format command work half in the entry form.
Is it possible to implement it for the next time?

thanks

2259

Wed Jun 27 16:15:04 2007

Re: formating bug : css and Format command

toumbi wrote:

ok so if you say it is not a bug i can understand but in that case the format command work half in the entry form. Is it possible to implement it for the next time?

Yes I will do that.

2260

Wed Jun 27 19:51:39 2007

Re: formating bug : css and Format command

Stefan Ritt wrote:

toumbi wrote:

ok so if you say it is not a bug i can understand but in that case the format command work half in the entry form. Is it possible to implement it for the next time?

Yes I will do that.

Thank you , I download and compile myself elogd and it work now.

But I found a line one the french language that make javascritp bug
line 391:
Enter heading level (1, 2 or 3) = Indiquez le niveau d'en-tęte (1, 2 ou 3)

=> linkHeading_prompt = 'Indiquez le niveau d'en-tęte (1, 2 ou 3)'; there is one more '

my french is better than my english so i can say it is a good translation but the symbole between the letter d and the letter e make exporer 7 bug.

Enter heading level (1, 2 or 3) = Indiquez le niveau d en-tęte (1, 2 ou 3) (this work but translation isn't good.

Thanks a lot ! and continue it is a beautiful tool.

2263

Thu Jun 28 15:24:31 2007

Re: How to change elog directories in windows

toumbi wrote:

Hi , I need an example for windows directories syntax.
I would like to start elog in windows xp from a server directories "\\myserver\elog\" for example and/or "G:\elog\"
I want my elogd.cfg be on this server and not on my local hard drive.
also I would like the windows service start automatically from "\\myserver\elog\" or "G:\elog\"
thank you for your help.

If you go to Computer Management, click on Services, double click on ELOG, you will see "Path to executable". Either you move elogd.exe to d:\elog and start it there, or you start elogd with the "-c" flag, which specifies the location of the config file, such as

...\elogd.exe -c g:\elog\elogd.cfg

I have to warn you however that sometimes I personally had kind of poor network connection to a Windows server, so the reply time of elog was many seconds.

2264

Thu Jun 28 17:05:56 2007

Re: How to change elog directories in windows

Stefan Ritt wrote:

toumbi wrote:

...\elogd.exe -c g:\elog\elogd.cfg

I have to warn you however that sometimes I personally had kind of poor network connection to a Windows server, so the reply time of elog was many seconds.

Hi stephan , I remove elog and setup it again wiht the nis installer, and enter Z:\ELOG\ which is a mapping drive of my server directorie.
but it dont work. i have an error code 3 when i register the services with the shortcut "Register ELOG server service" .

Attachment 1: elog.JPG

2265

Thu Jun 28 17:08:32 2007

Re: How to change elog directories in windows

toumbi wrote:

If you see the service config page, then the service is already registered, and you should not use the shortcut "Register ELOG server service" any more. Just change "Startup type" to "Automatic" or "Manual" and click on the "Start" button.

2266

Thu Jun 28 17:12:11 2007

Re: Error sending Email via "XXX.XXX.XXX.XXX"

JJ Sheppard wrote:

220 Welcome to the @Mail v4.4 SMTP Server ( Exim )
EHLO server.XXXX.net
250-MX1.SPIDERHOST.COM Hello server.XXXX.net [XXX.XXX.XX.XX]
250-SIZE 10485760
250-PIPELINING
250-AUTH LOGIN
250 HELP

The problem there is that your SMPT server does not reply with

250 OK

which my server does. So elogd was waiting 3 seconds for "OK", and then aborted. I change the code (now in SVN revision 1871) to look for "250 " (with one blank at the end). You have to update from SVN, recompile and try again. Anyhow elogd only supports plain login authentication ("AUTH LOGIN"), which not all SMPT servers accept. You have to see.

Goto page Previous 1, 2, 3 ... 201, 202, 203 ... 794, 795, 796 Next

ELOG V3.1.5-2eba886