If a file is on a memorystick and the memorystick is gone, how could elog bring it back? What you ask for is magic, sorry for that. Also if you move files outiside elog from one folder (drive) to anohter. How shoudl elog keep track of these files if they are outside? If your colleague moves some piece of equipment from A to B, without telling you, how can you guess where B is?

It is possible to change the justification for a column/attribute in the list mode (left-aligned, centered, right-aligned)?

Right now Elog treats each colum of a list as centered,

thank you

You can do that chaning the CSS of the underlying theme. But you need some experience with CSS.

I need to set text-align:left but only for an attribute in the List mode, For example, say that FirstName column must be left justified in list view. What is the name of the cell content in the default elog.css?

Hi Terry,

You might tell your browser to show you the source code of an ELOG page in list mode. There you'll find the class name you're looking for.

Cheers, Andreas

The CSS class for the list display table "listframe". If you want the second column to be left-aligned, you put following into elog.css:

.listframe td:nth-child(2) {
   text-align:left;
}

that should do the trick. Replace the "2" with the column you would like to change.

Stefan

Hi Stefan,

Obviously it's not magic but my inability to explain. I've attached a quick jpg of the file structure we use. So for every project we just repeat the file structure. It then becomes a browser based interface for our engineers, inspectors, project managers etc. so via the network they can access the data anywhere onsite.

Elog is used in an iframe on the manrec page. Here we record several logs (a record of everything we do, a record of test equipment, tools used, harnesses, connectors made and disconnected, etc. and what i'm now trying to achieve a document record / check list).

Now in the data directory we store hundreds of documents from procedures, circuit diagrams, mechanical drawings, parts lists, test reports and data, inspection reports, down to consumables like what type of cloth and liquid was used to wipe down a cable.

So the bulk of documents can fit on to an 8G memory stick, the only section that doesn't fit is the test data.  So when we need to move off site, or supply this data to a subcontractor we copy the contents (minus the test data) on to a memory stick, when the memory stick is returned we simply synchronise it back to the network. So the only links that would fail to work off site are links to test data - which we are not worried about.

Now, any new person working on the project needs to review the check list (hopefully the new elog if i can get it to work) part of this check list  / document record could say something like - carry out inspection, refer to drawing <href link> now this is where the problem occurs, as when the files are on the site based machine, we know the file structure is on the M:Drive; however when the memory stick is now plugged into a subcontractors machine / laptop we have no control of the drive allocation, so how can i get the link to the drawing to work?

When they finish the job required, they upload the data to the memory stick and state where.  ie inspection carried out - results passed see report "xyz" <href link>

I hope this now makes more sense

Kind regards

Terry