ID |
Date |
Icon |
Author |
Author Email |
Category |
OS |
ELOG Version |
Subject |
68022
|
Mon Jun 15 09:16:00 2015 |
| Daniel Sajdyk | daniel.sajdyk@gmail.com | Question | Windows | ELOG V3.1.0-3c6 | Re: "Preset on reply" not work? | Ok. Now it works :) Thank you :) I'm translating Elog into Polish. When I finish, can I send it to you?
Regards Daniel.
Stefan Ritt wrote: |
You have "Remove on reply" together with "Preset on reply Author". Since the first is executed later, you first preset the author name, then remove it again. Just discard the "Remove on reply" and you are fine.
Daniel Sajdyk wrote: |
Hi all :)
I try to setup my first lobgook, and have some problem.
I want that Author was preset by $long_name, and it can't change its name. That works correct. I also want, when other user click Reply, that he will be author of reply, but Author windows goes emtpy... No Author, or Reply User in that field. Is it correct?
Do you have any suggestions?
Here is part of config I use:
; preset author and email
Preset Author = $long_name
Preset Author Email = $user_email
; these attributes cannot be changed
Locked Attributes = Author
; options for reply
Subst on reply subject = Re: $Configuration Name
Remove on reply = Author, Author Email
Preset on reply Author = $long_name
Regards
Daniel.
|
|
|
68021
|
Mon Jun 15 08:33:50 2015 |
| Stefan Ritt | stefan.ritt@psi.ch | Question | Windows | ELOG V3.1.0-3c6 | Re: "Preset on reply" not work? | You have "Remove on reply" together with "Preset on reply Author". Since the first is executed later, you first preset the author name, then remove it again. Just discard the "Remove on reply" and you are fine.
Daniel Sajdyk wrote: |
Hi all :)
I try to setup my first lobgook, and have some problem.
I want that Author was preset by $long_name, and it can't change its name. That works correct. I also want, when other user click Reply, that he will be author of reply, but Author windows goes emtpy... No Author, or Reply User in that field. Is it correct?
Do you have any suggestions?
Here is part of config I use:
; preset author and email
Preset Author = $long_name
Preset Author Email = $user_email
; these attributes cannot be changed
Locked Attributes = Author
; options for reply
Subst on reply subject = Re: $Configuration Name
Remove on reply = Author, Author Email
Preset on reply Author = $long_name
Regards
Daniel.
|
|
68020
|
Mon Jun 15 08:28:43 2015 |
| Stefan Ritt | stefan.ritt@psi.ch | Request | Linux | latest | Re: dependencies lib | If you Google for "libssl.so.6 is needed", you will find for example this site: http://ubuntuforums.org/showthread.php?t=2096126 , which tells you to install the libssl-dev package.
alireza wrote: |
Hi,I'm new here :) and want to install elog on linux suse. could you please tell me, how can I find this following lib dependency.
linuxsuse#rpm -i elogi386.rpm
error: Failed dependencies:
libssl.so.6 is needed by elog-3.1.0-2.i386
Thanks in Advance
|
|
68018
|
Sun Jun 14 21:30:14 2015 |
| Daniel Sajdyk | daniel.sajdyk@gmail.com | Question | Windows | ELOG V3.1.0-3c6 | "Preset on reply" not work? | Hi all :)
I try to setup my first lobgook, and have some problem.
I want that Author was preset by $long_name, and it can't change its name. That works correct. I also want, when other user click Reply, that he will be author of reply, but Author windows goes emtpy... No Author, or Reply User in that field. Is it correct?
Do you have any suggestions?
Here is part of config I use:
; preset author and email
Preset Author = $long_name
Preset Author Email = $user_email
; these attributes cannot be changed
Locked Attributes = Author
; options for reply
Subst on reply subject = Re: $Configuration Name
Remove on reply = Author, Author Email
Preset on reply Author = $long_name
Regards
Daniel. |
68017
|
Sun Jun 14 10:17:18 2015 |
| alireza | ali_f5@yahoo.com | Request | Linux | latest | dependencies lib | Hi,I'm new here :) and want to install elog on linux suse. could you please tell me, how can I find this following lib dependency.
linuxsuse#rpm -i elogi386.rpm
error: Failed dependencies:
libssl.so.6 is needed by elog-3.1.0-2.i386
Thanks in Advance |
68016
|
Fri Jun 12 12:19:50 2015 |
| Stefan Ritt | stefan.ritt@psi.ch | Bug report | Other | ELOG V3.1.1-5ea | Re: Upload of images fails from mobile platforms when using ELOG under SSL | Use thumbnails (need ImageMagick to be installed for that), and you can show for example 300x300 pixel thumbnails of all pictures.
Neal Grafton wrote: |
On the subject of uploads, is there a way to restrict the viewing size of an uploaded photo or picture in the config? So it doesn't appear over more than one page.
Neal
Stefan Ritt wrote: |
That's strange. Might have to do with the SSL library elog uses. I just tried this forum (actually the "Demo"), and it worked fine through SSL, but I use an Apache proxy server for elog implementing the SSL protocol, which might be slightly different.
Hanno Perrey wrote: |
Hej,
I discovered a problem uploading images taken with the cameras of mobile devices to new elog entries directly from said devices. When selecting the image and choosing "Upload", either the blue page loading indicator gets stuck at around 10% (mobile Safari, iOS 8.3, iPhone 4 and iPad mini) or the error message "failed secure connection; connection reset while page was being loaded" ("Fehler: gesicherte Verbindung fehlgeschlagen. Verbindung zum Server wurde zurueckgesetzt waehrend die Seite geladen wurde") appears shortly after (Android 5.02, Firefox 37.0.2, Motorola G).
From the desktop browser (Firefox 38.0.5, OSX 10.10) there is no problem uploading images at all.
So far, this problem is very reproducible, but only when using ELOG with SSL enabled. Without SSL, the problem disappears on all platforms.
The ELOG daemon runs under Linux (Fedora 18) and I have also tried using the latest development version of ELOG.
Running ELOG with debug messages the only output after the page has been loaded is:
TCP connection #0 on socket 4 closed
TCP connection #0 on socket 4 closed
After these, there is no further output and the mobile devices do not indicate any progress either even after many mi.
The minimal config file I have been using is:
[global]
; network
port = 443
SSL = 1
URL = https://my.server.somewhere/
; paths
Logbook dir = /usr/local/elog/logbooks
Resource dir = /usr/local/elog
Logfile = /tmp/elog.log
[demo]
Attributes = Author, Type, Category, Subject
Required Attributes = Author, Type
Options Type = Status, Modification, Problem Report, Problem Details, Problem Fixed, Other
Options Category = Facility, Experiment, IT, Other
List Page Title = $logbook - $subject
As mentioned before, removing the first three lines fixes the problem (the URL line points to my actual server of course).
I would appreciate any pointers on how to debug this further! The functionality of posting images directly from mobile devices is quite important for the planed deployment of ELOG and I would very much prefer to have SSL enabled when doing so.
Thanks and cheers,
Hanno
|
|
|
|
68015
|
Fri Jun 12 11:59:00 2015 |
| Neal Grafton | neal.grafton@stfc.ac.uk | Bug report | Other | ELOG V3.1.1-5ea | Re: Upload of images fails from mobile platforms when using ELOG under SSL | On the subject of uploads, is there a way to restrict the viewing size of an uploaded photo or picture in the config? So it doesn't appear over more than one page.
Neal
Stefan Ritt wrote: |
That's strange. Might have to do with the SSL library elog uses. I just tried this forum (actually the "Demo"), and it worked fine through SSL, but I use an Apache proxy server for elog implementing the SSL protocol, which might be slightly different.
Hanno Perrey wrote: |
Hej,
I discovered a problem uploading images taken with the cameras of mobile devices to new elog entries directly from said devices. When selecting the image and choosing "Upload", either the blue page loading indicator gets stuck at around 10% (mobile Safari, iOS 8.3, iPhone 4 and iPad mini) or the error message "failed secure connection; connection reset while page was being loaded" ("Fehler: gesicherte Verbindung fehlgeschlagen. Verbindung zum Server wurde zurueckgesetzt waehrend die Seite geladen wurde") appears shortly after (Android 5.02, Firefox 37.0.2, Motorola G).
From the desktop browser (Firefox 38.0.5, OSX 10.10) there is no problem uploading images at all.
So far, this problem is very reproducible, but only when using ELOG with SSL enabled. Without SSL, the problem disappears on all platforms.
The ELOG daemon runs under Linux (Fedora 18) and I have also tried using the latest development version of ELOG.
Running ELOG with debug messages the only output after the page has been loaded is:
TCP connection #0 on socket 4 closed
TCP connection #0 on socket 4 closed
After these, there is no further output and the mobile devices do not indicate any progress either even after many mi.
The minimal config file I have been using is:
[global]
; network
port = 443
SSL = 1
URL = https://my.server.somewhere/
; paths
Logbook dir = /usr/local/elog/logbooks
Resource dir = /usr/local/elog
Logfile = /tmp/elog.log
[demo]
Attributes = Author, Type, Category, Subject
Required Attributes = Author, Type
Options Type = Status, Modification, Problem Report, Problem Details, Problem Fixed, Other
Options Category = Facility, Experiment, IT, Other
List Page Title = $logbook - $subject
As mentioned before, removing the first three lines fixes the problem (the URL line points to my actual server of course).
I would appreciate any pointers on how to debug this further! The functionality of posting images directly from mobile devices is quite important for the planed deployment of ELOG and I would very much prefer to have SSL enabled when doing so.
Thanks and cheers,
Hanno
|
|
|
68014
|
Thu Jun 11 09:09:03 2015 |
| Stefan Ritt | stefan.ritt@psi.ch | Bug report | Linux | 3.1.0 | Re: Drag-and-drop not working in elog 3.1.0 | Sure, I just wanted to get feedback from you regarding the draft functionality. As it looks now people are happy, so I will do a 3.1.1.
Andreas Luedeke wrote: |
PS: Stefan, V3.1.0-2411f95 is from April and you've spend a lot of work on ELOG since then. Maybe you could merge the development branch and release the 3.1.1 as an RPM? Thanks!
|
|
|