> > I've change my Attribute "Maint." to "Maint" in my elogd.cfg and in my 
Logbook too 
> > but the problem is the same, I have restarted the service but the 
problem is still 
> > here. Any idea? o_O
> 
> Have you upgraded to 2.5.8-2 ? After the upgrade, "Maint." (with the dot) 
should also work.

Yes I have upgraded Elog to 2.5.8-2.
I submit my new elogd.cfg file maybe it will help you.
I have try the preset text under Firefox (the last), avant browser 10.0 
(build 165) and IE 6 SP1.

Thanks for help :o)

> Yes I have upgraded Elog to 2.5.8-2.
> I submit my new elogd.cfg file maybe it will help you.
> I have try the preset text under Firefox (the last), avant browser 10.0 
> (build 165) and IE 6 SP1.

I tested your config file under Firefox (the last) and it worked fine. On the
"Liste Routeurs & Firewall", I click "New", then select FWL1, then see the text
"FLW1.txt" in the main body. I don't have that file, so elog by default just
shows the file name.

I also realized that you have double entries in your config file (like two
"Attributes = " and "Options Type = " lines. However this should not be a
problem, elog just chooses the first one.

If your preset text does not work, it could be that you have switched off
JavaScript. In Firefow, you can open the JavaScript console (Tools/JavaScript
console). Maybe you see any error there.

- Stefan

> > Yes I have upgraded Elog to 2.5.8-2.
> > I submit my new elogd.cfg file maybe it will help you.
> > I have try the preset text under Firefox (the last), avant browser 10.0 
> > (build 165) and IE 6 SP1.
> 
> I tested your config file under Firefox (the last) and it worked fine. On the
> "Liste Routeurs & Firewall", I click "New", then select FWL1, then see the text
> "FLW1.txt" in the main body. I don't have that file, so elog by default just
> shows the file name.
> 
> I also realized that you have double entries in your config file (like two
> "Attributes = " and "Options Type = " lines. However this should not be a
> problem, elog just chooses the first one.
> 
> If your preset text does not work, it could be that you have switched off
> JavaScript. In Firefow, you can open the JavaScript console (Tools/JavaScript
> console). Maybe you see any error there.
> 
> - Stefan

Ok I have fix the problem :)
Options Type = FWL1{1}, FWL2{2}, FWL4{3}, VPN1{4},VPN2{5}
{1} Preset text = FWL1.txt
{2} Preset text = FWL2.txt
{3} Preset text = FWL4.txt
{4} Preset text = VPN1.txt
{5} Preset text = VPN2.txt
I have delete the "" for example FWL1.txt instead of "FWL1.txt" and I've delete 
the double entries too. In fact I don't know why, ELOG has take the second Options 
Type instead of the one :)! Now It work fine :)

Thanks a lot Stefan ;)

I upgraded from ver 2.5.5-2 to 2.5.8-2 and found that none of my preset text
worked any longer.  I struggled with it for several hours and then reverted
back to 2.5.5-2 and the preset text worked again.  I have attached my
elgd.cfg file for review.  Thanks in advance for your help...

> I upgraded from ver 2.5.5-2 to 2.5.8-2 and found that none of my preset text
> worked any longer.  I struggled with it for several hours and then reverted
> back to 2.5.5-2 and the preset text worked again.  I have attached my
> elgd.cfg file for review.  Thanks in advance for your help...

Your config file really helped. You found a bug which happens only if one uses
conditions with lowercase letters, so that's why nobody else saw it before. I
fixed it and released V2.5.8-3

> > I upgraded from ver 2.5.5-2 to 2.5.8-2 and found that none of my preset text
> > worked any longer.  I struggled with it for several hours and then reverted
> > back to 2.5.5-2 and the preset text worked again.  I have attached my
> > elgd.cfg file for review.  Thanks in advance for your help...
> 
> Your config file really helped. You found a bug which happens only if one uses
> conditions with lowercase letters, so that's why nobody else saw it before. I
> fixed it and released V2.5.8-3

Thanks for the information.

ELOG is terrific!

I was upgrading to the latest version and I wrote over my cfg file. I 
still have my database files. Is there a way to put the cfg file back 
together using the database files as a guide.  It did not seem to want to 
upgrade until I did this and I forgot to copy and then paste the cfg files 
back.  The latest version is now running. Before I did this I was still 
getting the old version number at the bottom of the main screen.  Also I 
have an RSS reader that can do user name and password, is this possible 
with Elog if the RSS reader has the ability?

Thanks

I guess this qualifies as two questions.

David Egolf

I have a question about sending emails. I have a customer service ELog 
currently running but I would like to have an option to be able to pick 
from a list of people, one or more than one to send emails to with the 
logbook entry as the body.  I am currently using the email option to send 
emails to a list if an emergency is used in a category but I would like to 
be able to send the entry to different people at different times.  I would 
have everyone pre-entered with their names and emails and you could check 
a box by the person or people you want the log entry sent.  I wasn't sure 
if this is possible with the current system. 

Thanks for any input.

David Egolf

PS. The emails are actually email enabled cell phones so the cs entries 
are going to drivers who pick up and drop off work for the company.