ID |
Date |
Icon |
Author |
Author Email |
Category |
OS |
ELOG Version |
Subject |
1936
|
Mon Sep 18 18:19:44 2006 |
| Steve Jones | steve.jones@freescale.com | Question | All | 2.6.2-1714 | Re: Re: Why are Preset fields blanked out? |
Stefan Ritt wrote: |
Steve Jones wrote: | The snippet of code below sets an attribute to a date depending on the selection. Problem is, if attribute ApprovedDate was previously set, selecting any other value for CRStatus will blank out ApprovedDate (the same occurs for CompletedDate). Why would this be occurring when the conditionals are mutually exclusive?
##################################################
# Define CRState
#
Options CRState = PENDING{a}, APPROVED{b}, HOLD{a}, REJECTED{a}, COMPLETED{c}
{a}
{b} Preset ApprovedDate = $date
{c} Preset CompletedDate = $date
|
I don't understand your problem. If I use following config file:
[demo]
Theme = default
Attributes = Author, CRState, ApprovedDate, CompletedDate
Options CRState = PENDING{a}, APPROVED{b}, HOLD{a}, REJECTED{a}, COMPLETED{c}
{a}
{b} Preset ApprovedDate = $date
{c} Preset CompletedDate = $date
and make an entry, then edit it, selecting approved, then submit, then edit again, then select completed, then I get following:
which looks ok to me (the previous ApprovedDate does not get blanked out). Can you reproduce that behaviour? |
Quote: |
I think I found it. Try this:
Locked Attributes = ApprovedDate, CompletedDate
##################################################
# Define CRState
#
Options CRState = PENDING{a}, APPROVED{b}, HOLD{a}, REJECTED{a}, COMPLETED{c}
{a}
{b} Preset ApprovedDate = $date
{c} Preset CompletedDate = $date
In my config when I remove the two attributes from "LOCKED ATTRIBUTES" the fields do not get blanked out.
|
|
1937
|
Mon Sep 18 18:36:07 2006 |
| Steve Jones | steve.jones@freescale.com | Question | All | 2.6.2-1714 | "Supress Email Notification" checkbox |
Is there a way to allow email notification but have the "Suppress Email Notification" checked by default? We had complaints about the enormous amount of email so I turned off email notification for edits/replys, but there are times that I would like to allow email to be sent out -- this would imply allowing email by unchecking the "Suppress" box. |
1938
|
Mon Sep 18 18:56:19 2006 |
| Steve Jones | steve.jones@freescale.com | Question | All | 2.6.2-1714 | Re: "Supress Email Notification" checkbox |
Steve Jones wrote: | Is there a way to allow email notification but have the "Suppress Email Notification" checked by default? We had complaints about the enormous amount of email so I turned off email notification for edits/replys, but there are times that I would like to allow email to be sent out -- this would imply allowing email by unchecking the "Suppress" box. |
What I think would be needed is:
Suppress Email on edit = 0|1|2
^
Where a '2' denotes that the "Suppress Email Notification" shows up but *checked* |
1939
|
Mon Sep 18 20:35:44 2006 |
| Steve Jones | steve.jones@freescale.com | Bug report | Other | 2.6.2-1714 | SVN1714 will not run in 'daemon" mode on Solaris8 |
On Solaris, SVN1714 will not go into daemon mode. Running the compiled version under TRUSS (which provides a dump of every system call) and shows precisely where elog is failing. I have attached two TRUSS outputs: one where it errors out and the other where it runs but "interactively". Both runs are as root, simply one with and one without the "-D" |
1940
|
Mon Sep 18 22:09:23 2006 |
| Steve Jones | steve.jones@freescale.com | Bug report | Other | 2.6.2-1714 | Re: SVN1714 will not run in 'daemon" mode on Solaris8 |
Steve Jones wrote: | On Solaris, SVN1714 will not go into daemon mode. Running the compiled version under TRUSS (which provides a dump of every system call) and shows precisely where elog is failing. I have attached two TRUSS outputs: one where it errors out and the other where it runs but "interactively". Both runs are as root, simply one with and one without the "-D" |
Quote: |
As a followon, when I do run SVN1714 as a detached process but started as ROOT I get the following console messages:
Cannot restore original GID/UID.
Cannot restore original GID/UID.
Cannot restore original GID/UID.
Cannot restore original GID/UID.
Cannot restore original GID/UID.
Cannot restore original GID/UID.
Cannot restore original GID/UID.
I do not get these when I run the app as me - which is a non-UID 0 account. Perhaps this is an artifact of the "-x" option?
|
|
1941
|
Tue Sep 19 17:32:28 2006 |
| Stefan Ritt | stefan.ritt@psi.ch | Question | All | 2.6.2-1714 | Re: Re: Why are Preset fields blanked out? |
Steve Jones wrote: |
I think I found it. Try this:
Locked Attributes = ApprovedDate, CompletedDate
##################################################
# Define CRState
#
Options CRState = PENDING{a}, APPROVED{b}, HOLD{a}, REJECTED{a}, COMPLETED{c}
{a}
{b} Preset ApprovedDate = $date
{c} Preset CompletedDate = $date
In my config when I remove the two attributes from "LOCKED ATTRIBUTES" the fields do not get blanked out.
|
No, even with that it does not get blanked out. Attached is the complete elogd.cfg with which it works fine in my case (R1714). Can you try that? |
1942
|
Tue Sep 19 19:22:31 2006 |
| Steve Jones | steve.jones@freescale.com | Question | All | 2.6.2-1714 | Re: Re: Why are Preset fields blanked out? |
Stefan Ritt wrote: |
Steve Jones wrote: |
I think I found it. Try this:
Locked Attributes = ApprovedDate, CompletedDate
##################################################
# Define CRState
#
Options CRState = PENDING{a}, APPROVED{b}, HOLD{a}, REJECTED{a}, COMPLETED{c}
{a}
{b} Preset ApprovedDate = $date
{c} Preset CompletedDate = $date
In my config when I remove the two attributes from "LOCKED ATTRIBUTES" the fields do not get blanked out.
|
No, even with that it does not get blanked out. Attached is the complete elogd.cfg with which it works fine in my case (R1714). Can you try that? |
Quote: |
Stefan, when I try that config in a demo logbook in my installation *but with all other items in [global] I get the same field-blanking behavior. I am going to try going back to a completely pristine .cfg, but I suspect this will work fine. I will need to add back in configuration items until I run into the culprit.
Ok, I found it. Try this config:
[global]
port = 8080
[demo]
Comment = Test
Attributes = Author, CRState, ApprovedDate, CompletedDate
Locked Attributes = ApprovedDate, CompletedDate
Type CompletedDate = date
Type ApprovedDate = date
Format CompletedDate = 1
Options CRState = PENDING{a}, APPROVED{b}, HOLD{a}, REJECTED{a}, COMPLETED{c}
{a}
{b} Preset ApprovedDate = $date
{c} Preset CompletedDate = $date
Setting the "Type" to "date" causes the blanking to occur.
|
|
1943
|
Tue Sep 19 20:28:15 2006 |
| Stefan Ritt | stefan.ritt@psi.ch | Question | All | 2.6.2-1714 | Re: Re: Why are Preset fields blanked out? |
Steve Jones wrote: |
Setting the "Type" to "date" causes the blanking to occur.
|
Ok, then don't set the "Type" to "date" |