Record ID corruption, posted by Frank Baptista on Sun May 3 15:58:24 2020
|
Hi all,
I've encountered an occasional problem that seems to be exacerbated by having a message with many replies.
In our use of ELOG, we run lengthy environmental tests (often several days) in multiple temperature chambers (one logbook for each chamber). |
Re: Record ID corruption, posted by David Pilgram on Sun May 3 18:05:32 2020
|
Hi,
I've had problems in the past due to a dodgy pointer creating branches despite a "No branches" in the configuration file.
It would be very interesting to see what the 200428a.log file looks like with these entries: in the screenshot they appear to be shown in time order, but |
Re: Record ID corruption, posted by Frank Baptista on Sun May 3 22:43:12 2020 
|
Hi David,
Thanks for the quick response! Well, I'd have to say that the sequence is as tangled as it looks in the logbook -- I've attached
a copy of the log file for your reading pleasure. |
|
Re: Record ID corruption, posted by David Pilgram on Mon May 4 14:55:53 2020
|
Hi Frank,
There are two interesting points about the log file.
1. Entry 5658 is timestamped later than 5659, but is earlier in the entry list. It also is "In Reply to" 5659. despite |
|
Re: Record ID corruption, posted by Frank Baptista on Fri May 22 21:03:05 2020
|
Hi David,
Well, you've made some very interesting observations, and raised some excellent questions. So, I went back and did some homework, reviewing
a number of logbooks to find instances where this strange 'record twist' occurs. You had asked, "Do you have enough information to decided |
|
Re: Record ID corruption, posted by David Pilgram on Sat May 23 16:15:38 2020
|
Hi Frank,
Good bit of detective work. To me it suggests that something as yet undetermined occurs, that, when the 57th reply happens, causes the
issue. If that "something" hasn't happened, all is well. Apart from Heinz varieties (not true, in fact), 57 isn't an obvious |
|
change Cell Style, posted by Lahreche Abdelmadjid on Tue Jun 30 11:21:11 2020
|
Hi All,
I hope to change the Cell Style backround color into background point.
because my color printer don't work. |
change Cell Style, posted by Lahreche Abdelmadjid on Tue Jun 30 11:39:12 2020
|
Hi All,
I hope to change the Cell Style backround color into background point.
because my color printer don't work. |