Yes, I forgot to mention that you need to enable shell script execution by starting the server with "elogd -x".

Before you start elogd from the command line you need to shutdown any running elogd; otherwise the port is blocked and the command line elogd cannot start: "sudo /sbin/service elogd stop"

From Linux you can edit instead /etc/init.d/elogd and add there the option "-x" to the line where "elogd" is started and then restart the service: "sudo /sbin/service elogd restart".

Hi all,

It's possible my question is entirely within the domain of CKeditor, but I figure it may also have something to do with how it's plugged into ELOG. 

In essence, when attaching a PDF to an ELOG post as an image, the post body shows the generated thumbnail and there is a link to the full resolution PDF at the bottom of the post. 

However, if instead, I attach a JPG or PNG, the link to the full resolution image is not present in the post (though it can be accessed through the small paperclip icon).

Is there a way to show links to the thumbnailed images, or even for the thumbnail itself to be a hyperlink to the full resolution source?

Thanks for your time,

Eric Q. 

I tried that It is not calculating  and it is giving the error "Shell execution not enabled via -x flag ".I started elogd -x from command prompt  it still gives the same error.

If you have the following elogd.cfg:

And the shell script /usr/local/elog/diff.sh is:

#!/bin/sh
s1=$(date -d "$1" +%s)
s2=$(date -d "$2" +%s)
d=$(echo "($s2-$s1)/3600"|bc -lq)
printf "%.0f hours" $d

Then DURATION is calculated from START and END in full hours.

It appears that if you define START and END as "datetime", then only the date part would be passed to the script. This may is a bug of elogd: Stefan, have you ever tried?

PS: Please do NOT write all capital text in a forum. Thank you!

I HAVE A LOGBOOK WHICH KEEPS THE RECORD OF ALL FAULT BOOKED BY DIFFERENT SUBSCRIBER.THIS LOGBOOK HAS THREE ATTRIBUTE DOWNTIME,UPTIME & TOTAL DURATION (DATE &TIME FORMAT) . I WANT TO CALCULATE THE TOTAL DURATION AUTOMATICALLY WHENEVR UPTIME VALUE IS GIVEN AND IF THE UPTIME IS NOT GIVEN IT SHOULD CALCULATE DEPENDING UPON THE SYSTEM PRESENT TIME.PLEAS EXPLAIN IT WITH EXAMPLE.

No no, i used the rpm form the website... I was thinking on having the bianries compiled, im downloading the server install dvd

to replicate the environment and have the same functionality.

Thanks for the answer ;-)

Regards

Hi all !!!

i have just updated and 2.9.2-1 elog instance, and i have problems with the kerberos configuration.

I was surprised to see on the logs, that the 3.0 daemon was refusing to start because the system

config has kerberos listed as an authentication method. I saw on the logs that the current daemon

didnt have kerberos support compiled in.

Ive seen that there is ldap support, but couldnt find anything about configuring this auth sytem, does

amnyone have any example i could check ?

Did i have to use a patched version ? or compile it on my own ?

Regards