| ID |
Date |
Icon |
Author |
Author Email |
Category |
OS |
ELOG Version |
Subject |
|
67765
|
Mon Jan 26 15:06:49 2015 |
 | Maikolk Kein | javier.sanchez@wincor-nixdorf.com | Question | Linux | 3.0.0 | Re: Kerberos auth not available on 3.0 ? |
No no, i used the rpm form the website... I was thinking on having the bianries compiled, im downloading the server install dvd
to replicate the environment and have the same functionality.
Thanks for the answer ;-)
Regards
| Andreas Luedeke wrote: |
|
Hi Maikolk,
I have elogd 3.0 running with kerberos: I had no problems with that.
Maybe you forgot to change the Makefile before compiling?
Uncomment line 28 to:
# flag for Kerberos support, please turn on if you need Kerberos
USE_KRB5 = 1
and then "make clean" and "make install" (or "make update").
Regards, Andreas
| Maikolk Kein wrote: |
|
Hi all !!!
i have just updated and 2.9.2-1 elog instance, and i have problems with the kerberos configuration.
I was surprised to see on the logs, that the 3.0 daemon was refusing to start because the system
config has kerberos listed as an authentication method. I saw on the logs that the current daemon
didnt have kerberos support compiled in.
Ive seen that there is ldap support, but couldnt find anything about configuring this auth sytem, does
amnyone have any example i could check ?
Did i have to use a patched version ? or compile it on my own ?
Regards
|
|
|
|
67764
|
Mon Jan 26 15:04:38 2015 |
| Andreas Luedeke | andreas.luedeke@psi.ch | Question | Linux | 3.0.0 | Re: Kerberos auth not available on 3.0 ? | Hi Maikolk,
I have elogd 3.0 running with kerberos: I had no problems with that.
Maybe you forgot to change the Makefile before compiling?
Uncomment line 28 to:
# flag for Kerberos support, please turn on if you need Kerberos
USE_KRB5 = 1
and then "make clean" and "make install" (or "make update").
Regards, Andreas
| Maikolk Kein wrote: |
|
Hi all !!!
i have just updated and 2.9.2-1 elog instance, and i have problems with the kerberos configuration.
I was surprised to see on the logs, that the 3.0 daemon was refusing to start because the system
config has kerberos listed as an authentication method. I saw on the logs that the current daemon
didnt have kerberos support compiled in.
Ive seen that there is ldap support, but couldnt find anything about configuring this auth sytem, does
amnyone have any example i could check ?
Did i have to use a patched version ? or compile it on my own ?
Regards
|
|
|
67763
|
Mon Jan 26 10:30:40 2015 |
 | Maikolk Kein | javier.sanchez@wincor-nixdorf.com | Question | Linux | 3.0.0 | Kerberos auth not available on 3.0 ? | Hi all !!!
i have just updated and 2.9.2-1 elog instance, and i have problems with the kerberos configuration.
I was surprised to see on the logs, that the 3.0 daemon was refusing to start because the system
config has kerberos listed as an authentication method. I saw on the logs that the current daemon
didnt have kerberos support compiled in.
Ive seen that there is ldap support, but couldnt find anything about configuring this auth sytem, does
amnyone have any example i could check ?
Did i have to use a patched version ? or compile it on my own ?
Regards |
|
67762
|
Thu Jan 22 17:32:16 2015 |
| David Pilgram | David.Pilgram@epost.org.uk | Request | All | - | Re: Configure default time range in 'Find' | If my coding had been up to it, I would have done this and submitted... thanks Stefan.
| Stefan Ritt wrote: |
|
I added a new optoin "Show last default = <days>", where one can pre-set the "Show last" drop-down box. I think this is a good idea, so now people can configure their elog to a certain default in this parameter. Of course all settings in the Find page are AND'ed together, so if one restricts the search to tha last week, but then looks for a date more in the past, the result will be zero by definition. The change is in the GIT repository. If you cannot recompile the code yourself, you have to wait for the next release.
| David Pilgram wrote: |
|
By the way, in further testing, the "Show last" selection over-rides whatever two dates are selected, so if you ask for any entry in Dec 2014, but the "Show last" selects "week", nothing is found - very quickly. I trust that is what you're after, Eoin. I'll keep my change to the coding, but that's personal choice.
|
|
|
|
67761
|
Thu Jan 22 17:27:47 2015 |
 | dev | joshi868b@gmail.com | Question | All | 3.3 | calculate the value of one attribute depending upon the value of other attribute. | I HAVE A LOGBOOK WHICH KEEPS THE RECORD OF ALL FAULT BOOKED BY DIFFERENT SUBSCRIBER.THIS LOGBOOK HAS THREE ATTRIBUTE DOWNTIME,UPTIME & TOTAL DURATION (DATE &TIME FORMAT) . I WANT TO CALCULATE THE TOTAL DURATION AUTOMATICALLY WHENEVR UPTIME VALUE IS GIVEN AND IF THE UPTIME IS NOT GIVEN IT SHOULD CALCULATE DEPENDING UPON THE SYSTEM PRESENT TIME.PLEAS EXPLAIN IT WITH EXAMPLE. |
|
67760
|
Thu Jan 22 17:04:03 2015 |
| Eoin Butler | eoin.butler@cern.ch | Request | All | - | Re: Configure default time range in 'Find' | This looks like exactly what I wanted, thanks!
| Stefan Ritt wrote: |
|
I added a new optoin "Show last default = <days>", where one can pre-set the "Show last" drop-down box. I think this is a good idea, so now people can configure their elog to a certain default in this parameter. Of course all settings in the Find page are AND'ed together, so if one restricts the search to tha last week, but then looks for a date more in the past, the result will be zero by definition. The change is in the GIT repository. If you cannot recompile the code yourself, you have to wait for the next release.
| David Pilgram wrote: |
|
By the way, in further testing, the "Show last" selection over-rides whatever two dates are selected, so if you ask for any entry in Dec 2014, but the "Show last" selects "week", nothing is found - very quickly. I trust that is what you're after, Eoin. I'll keep my change to the coding, but that's personal choice.
|
|
|
|
67759
|
Thu Jan 22 16:30:07 2015 |
| Stefan Ritt | stefan.ritt@psi.ch | Request | All | - | Re: Configure default time range in 'Find' | I added a new optoin "Show last default = <days>", where one can pre-set the "Show last" drop-down box. I think this is a good idea, so now people can configure their elog to a certain default in this parameter. Of course all settings in the Find page are AND'ed together, so if one restricts the search to tha last week, but then looks for a date more in the past, the result will be zero by definition. The change is in the GIT repository. If you cannot recompile the code yourself, you have to wait for the next release.
| David Pilgram wrote: |
|
By the way, in further testing, the "Show last" selection over-rides whatever two dates are selected, so if you ask for any entry in Dec 2014, but the "Show last" selects "week", nothing is found - very quickly. I trust that is what you're after, Eoin. I'll keep my change to the coding, but that's personal choice.
|
|
|
67758
|
Thu Jan 22 08:35:23 2015 |
| Andreas Luedeke | andreas.luedeke@psi.ch | Question | All | 3.3 | Re: filter with or operation/TIME DURATION CALCULATION |
| dev wrote: |
|
1.I HAVE A ELOG BOOK WITH TWO ATTRIBUTE 'FROM' &'TO'. I WANT TO USE A FILTER WHICH WILL SEARCH FOR A VALUE IN BOTH ATTRIBUTE .KINDLY HELP ME.
2. HOW TO CALCULATE THE TIME DURATION AUTOMATICALLY BASED ON TWO ATTRIBUTES 'START TIME' AND 'STOP TIME' .
|
1a. If you go to the "Find" form, you can add filters on several attribute. The URL of the result page can be bookmarked: this is your filter.
1b. If you define quick filters on FROM and TO, then you can enter filters on both.
2. If you start elogd with the -x option, then you can execute scripts in the "subst" and "subst on edit" commands. Within those shell scripts you can use $START TIME and $STOP TIME to calculate the attributes value. Look for the "Subst" command in the documentation. |
|