I'm running  Elog version V3.1.4-ba84827 on Red Hat Linux 7.9. As part of migrating from an older in-house logbook to Elog, I need to upload all the old logbook entries. However, when I attempt to do that with the "elog" command line tool, I'm getting the error "command Submit not  allowed.

I read through a similar report from 2015 (entry #68149), but none of the potential causes seem to be at play here. The logbook is using PAM authentication, and I can log in to the web interface using the same credentials I'm using from the command line. The other case mentioned a dis-allowed encoding format, but my logbook is configured to allow all formats.

This is the command line I'm using:

/usr/local/elog/bin/elog -v -h logbook.aps.anl.gov -p 8081 -l On_Call -x -n 2 -a Date='10/19/2020 01:02' Author="David Wallis" Title='Test Upload' Status='Open' System='On-Call' -u 'wallis' '*****'  "This is a test message"

Update: I tried switching the logbook to no authentication reqiured, and still get the "command Submit not allowed" response.

"submit not allowed" you typically get if there is a "guest menu" for read-only access and you are not logged in. I never tried the elog program with PAM authentication, but you said that your turned authentication off. What I would do is to strip down your elogd.cfg to a very simple form until the elog utility works, then figure out which configuration makes the trouble.

Stefan

Hmmm... I added "New" to the Guest menu list, and the button showed up for a guest user. But when I submitted the new ticket, I got the message Error: Command "Submit" is not allowed for user ""

Giving up. Send me your config file and I will debug it.

Stefan

I've been able to work around this by completely turning off authentication, and adding New to the Guest menu list.

One additional question: since I'm uploading historical logbook entries, is it possible to set the entry creation date via the command line? It seems that elogd is overriding the attribute "Date".

FYI, I had problems a few weeks ago trying to get the command line elog working, blamed everybody and everything but myself.

In my case it was command line syntax errors and eventually got it going as part of a nightly script

While testing I ran the Elog Server from the command line in verbose mode to see if that helped determine the problem.

On the server end the logbook uploading to is set for Plaintext

# Set entries to TEXT Only format
Default encoding = 1
Allowed encoding = 1

Elog server authenication is standard built in to elogd, no PAM, no LDAP, no Kerberos 

Below is what works for me, I’ve replaced my Elog Server Hostname, Elog Username & Password used to connect to the server with generic.

Elog Server version = elog-3.1.4-2

# Log details in Elog Server

/usr/local/bin/elog -h HOSTNAME -p 80 -l Backups -u USERNAME PASSWORD -a Backup=NightlyBackupScript -a Hostname=$HOST -n 1 -x -m /tmp/elog.nightly.script.$TIMESTAMP

I've been caught out in the past having a very old version of the elog command line talking to a recent Elog Server build or Encoding not matching

Hi David, thanks for your input!

This logbook has been around for almost 10 years, and has evolved from file-based authentication, to LDAP, and finally to PAM (that can use any of local password files, LDAP, and Active Directory), and I'm thinking that might be the root of this problem. There are old account entries from the file-based days, with passwords, that match the AD usernames. I'm wondering if elogd is trying to use the password in the password file, rather than via PAM. I don't remember the old passwords, so I can't check, and I've run into problems trying to change the passwords. I'm wondering if there's a way to generate a new password from the command line, that would allow me to test the theory.

Hello,

How can one add an attachment to a new or existing entry with py_elog?
E.g. if I want to upload an image.

Thanks for the help!

Dear colleagues,
Can someone compile an up-to-date windows-version or write a manual how to do it in Windows without compiling errors?
Thank you.

Hello,

I'm working on new logbook and in one category I'll have many attributes (many more than in attached screenshot).

So here is my question. Is it possible to visually group such attributes with some border, or something like that?

In screenshot you can see what I want to achieve.

Best Regards

Daniel

Nope, this is not possible. Sorry.

Stefan

Our Unix server died, so we decided to move our old eLog to the new server, running Mac OSX. Elog version is earlier then 2013, I can not say

I read that on OSX  eLog must be intalled through "make" command

if I need to install eLog first, how to add all old information later?

• you need to copy your logbooks into the "logbooks" directory.
• you need to copy your elog.cfg logbook config file to the new elog folder and reference it at start-up (something like "elogd -c /usr/local/elog/elogd.cfg ...")

Some people modify other stuff (CSS, java scripts) but if you had you would know what you did.

If the old ELOG was a 2.x version and the new is 3.x, then on the first start-up all logbook data files are copied into sub-folders for each year.
This is only done (automatically) during the first start-up, afterwards you can not use a 2.x version anymore (you won't want that anyway).

Hi,

Since few days I Notice that I've some data who disappear from ELOG (software).

I find them on ELog/Logbooks, but can't view them in the application ELOG !

Is there a solution ?

Thanks.

Oh! I can view all data but only from the PC where ELOG is Installed !

From the other PC data missed.

The solution is in the reindex 

Hi. 

I am an IT guy of the AMS collaboration at CERN. We have been using your wonderful elog software for about 10 years now. Thanks! It served us so well that I guess we never got in touch with you. 

Recently we have upgraded it (probably for the first time in years) up to the version ELOG V3.1.4-4936b76.

Since then, we have a particular problem. And finally, I managed to reproduce it.

So, when I edit a record and click the "Submit" button it goes back to the summary view (as usual, as before) but it does not really save the entry. And it shows that the record is still being edited. I can actually click "back" in the browser and not to lose the modifications (otherwise, if I try to edit and steal the lock, it's lost). 

I will try to figure out where the problem is coming from. The most verbose mode of the elog server I've found is just GET-POST lines, not helpful. Is there a debug mode? 

Also, we ran httpd configured with the elogd as a virtual host (proxy).

Any help is very appreciated. 

Cheers, 

Andrey

Hi again. We have solved our problem! 

It was caused by a non-defined mod_auth_openidc configuration parameter:

# Interval in seconds after which the session will be invalidated when no interaction has occurred.

# When not defined, the default is 300 seconds.

#OIDCSessionInactivityTimeout <seconds>

As a guess... This somehow makes elogd to forget a user who is editing an entry. And then, clicking "Submit" button makes elogd to start a new session? 

Hey,

I'm trying to integrate the Elog into our SlowControl System (Phoebus/EPICS). As a first step I translated the python library to Java. So writing new Entries and viewing them works.
But for Phoebus, you need a list of the possible values for the attributes. Currently this is done via the config file from Phoebus.

Is there a way to get the values also via a query directly from the Elog?

Cheers,
Florian

That would be a nice feature...

If you are good in parsing HTML you can achieve this feature: when you create a new entry "<elog-URL>?cmd=new", you'll get HTML source code that provides you with all possible attribute choices.

Disclaimer: this only works if you don't use Conditional attributes.

Thanks for the tipp. I managed to use XPATH to get the values for my Type and Category attributes!

The API, I'm developing for Phoebus is quiet simple. It currently just supports Author, Subject, Type and Category as attributes and the latter two are just lists of values.