Demo Discussion
Forum Config Examples Contributions Vulnerabilities
  Discussion forum about ELOG, Page 276 of 808  Not logged in ELOG logo
 Find |  Login |  Help 
New entries since:Thu Jan 1 01:00:00 1970
 Full | Summary | Threaded | Hide attachments  Show all entries    6457 Entries 
Goto page Previous  1, 2, 3 ... 275, 276, 277 ... 806, 807, 808   Next  
ID Date Icon Author Author Emaildown Category OS ELOG Version Subject
  67447   Thu Feb 21 08:12:01 2013 Reply Stefan Rittstefan.ritt@psi.chQuestionWindowsELOG V2.7.Re: Multiple versions of elog on one server

Chris Smith wrote:

David Pilgram wrote:

Chris Smith wrote:

Is there a way of having multiple copies of elog running on one windows 2003 server? different ports?

I need to access 2 different elogd.cfg files.

 It's probably not of much help, but for a short time I ran two elog daemons on the same linux box, using different ports.  It was thus able to run with two separate elogd.cfg files.   This is linux, and heavily biased to my eccentric way of running this linux box, but started them as:

/usr/local/sbin/elogd -p 8080 -c /home/logbooks1/elogd1.cfg -d /home/logbooks1

/usr/local/sbin/elogd -p 8081 -c /home/logbooks2/elogd2.cfg -d /home/logbooks2

Do note that as I was the only user on that linux box, I didn't have login etc.

However, I was soon asked questions by Andreas as to how I found this running, as he had encountered problems with an earlier version.  To be honest, that stopped me experimenting too far with this at that point, as well as a coincidental upgrading of my hardware.

But I was doing this *not* because I had to run two separate elogd.cfg files, but other reasons which meant splitting into two at that time vastly improved the performance of elog on the linux box at that time.  So while I didn't actually enounter any problems in doing so, I only have limited experience - and, of course, absolutely none on running even one [windows equivalent of a daemon] on Windows.

I am assuming here you have good reason for two separate elogd.cfg files, rather than just wanting to run two separate logbooks - guessing here, but one set public (no login) and one set private (with login)?

 

 

 I need to do this because there are 2 different groups that each have 6 or 7 different logbooks in their elogd.cfg files.  (and they can't access each others log books)

Currently the first group  accesses elog as http:elog.com:8080.  The elogd windows service executes "C:\Program FilesELOG\elogd.exe" -D -c "C:\Program Files\ELOG\elogd.cfg"  

From what I can tell, whats needed is either some way to get the windows service to run a different config file or there needs to be a way of creating a second elog windows service that points to a different elogd.cfg file. Is there some way of doing this?

Have you checked the option "Top groups", which was made especially for that case? You can create several independent sets of logbooks not seeing each other. 

  67453   Fri Feb 22 08:19:27 2013 Reply Stefan Rittstefan.ritt@psi.chQuestionLinux2.92Re: any way to undelete entries?

Mark Bergman wrote:

 Is there any way within eLog to undelete entries?

No. 

  67455   Fri Feb 22 11:40:34 2013 Reply Stefan Rittstefan.ritt@psi.chQuestionWindowsELOG V2.7.Re: Multiple versions of elog on one server

Chris Smith wrote:

Stefan Ritt wrote:

Chris Smith wrote:

David Pilgram wrote:

Chris Smith wrote:

Is there a way of having multiple copies of elog running on one windows 2003 server? different ports?

I need to access 2 different elogd.cfg files.

 It's probably not of much help, but for a short time I ran two elog daemons on the same linux box, using different ports.  It was thus able to run with two separate elogd.cfg files.   This is linux, and heavily biased to my eccentric way of running this linux box, but started them as:

/usr/local/sbin/elogd -p 8080 -c /home/logbooks1/elogd1.cfg -d /home/logbooks1

/usr/local/sbin/elogd -p 8081 -c /home/logbooks2/elogd2.cfg -d /home/logbooks2

Do note that as I was the only user on that linux box, I didn't have login etc.

However, I was soon asked questions by Andreas as to how I found this running, as he had encountered problems with an earlier version.  To be honest, that stopped me experimenting too far with this at that point, as well as a coincidental upgrading of my hardware.

But I was doing this *not* because I had to run two separate elogd.cfg files, but other reasons which meant splitting into two at that time vastly improved the performance of elog on the linux box at that time.  So while I didn't actually enounter any problems in doing so, I only have limited experience - and, of course, absolutely none on running even one [windows equivalent of a daemon] on Windows.

I am assuming here you have good reason for two separate elogd.cfg files, rather than just wanting to run two separate logbooks - guessing here, but one set public (no login) and one set private (with login)?

 

 

 I need to do this because there are 2 different groups that each have 6 or 7 different logbooks in their elogd.cfg files.  (and they can't access each others log books)

Currently the first group  accesses elog as http:elog.com:8080.  The elogd windows service executes "C:\Program FilesELOG\elogd.exe" -D -c "C:\Program Files\ELOG\elogd.cfg"  

From what I can tell, whats needed is either some way to get the windows service to run a different config file or there needs to be a way of creating a second elog windows service that points to a different elogd.cfg file. Is there some way of doing this?

Have you checked the option "Top groups", which was made especially for that case? You can create several independent sets of logbooks not seeing each other. 

 I will check out the "Top Groups". But another question, the documentation says "Prior to ELOG version 2.4.1, one had to run two elogd servers in parallel, listening under different ports." ... how do you set this up?

You have to create manually a second service. Clone all entry from the first one, except the command line where you load a different elogd.cfg. But I actually never tried this myself. 

  67458   Tue Feb 26 08:24:45 2013 Reply Stefan Rittstefan.ritt@psi.chQuestionWindows2.9.2Re: Search result background color

Francois Cukier wrote:

 Is it possible to change the "yellow" background color when running a search ? (I looked in the css, there is nothing...) 

Couldn't find any syntax for elogd.cfg

Thanks for your help :)

There are no specific classes for the search dialog, but you can play with the classes "form2", "attribname" and "attribvalue". These classes are used in several places, so all will change in the same way, but maybe that's what you like. 

  67459   Tue Feb 26 08:25:14 2013 Reply Stefan Rittstefan.ritt@psi.chQuestionWindows2.9.2Re: Edit from summary view

Francois Cukier wrote:

 Good day,

 

I was wondering (and I searched for :) ) a way to directly edit an entry while in summary view instead of having to first click on the entry then click on Edit...

I mean, in summary view, every row entry is clickable to access the entry itself (except email witch open email client), so instead to open it, can it be edited directly ?

Is it possible ?

No, this is not possible. 

  67465   Thu Mar 7 12:52:12 2013 Reply Stefan Rittstefan.ritt@psi.chQuestionWindowsV2.9.2-245Re: Fixed Attributes on first reply

Tobias Meyer wrote:

 Hi i am new here,

 
is there a way to use a Parameter like this "Fixed Attributes on first reply"?

No, only "Fixed Attributes Reply".  

  67467   Thu Mar 7 14:13:08 2013 Reply Stefan Rittstefan.ritt@psi.chQuestionWindowsV2.9.2-247Re: Wrong link in "Your ELOG account has been activated" email
> After entering a new user and activating it in ELOG, the new user receives an email.
> The link does not work because the port number is repeated in the link (see below)
> In the Global part of the elogd.ini we have added the port:
> port = 8080
> 
> Maybe I am overlooking something, any suggestions are very much appreciated!
> 
> Thanks!
> Ron
> 
> - - - - - -
> 
> Email Subject: Your ELOG account has been activated
> 
> Email Body:
> 
> Your ELOG account has been activated on host eloghost:8080.
> 
> You can access it at http://eloghost:8080:8080/logbookname/?unm=newuser.
> 
> To subscribe to any logbook, click on 'Config' in that logbook.

I just tried myself and got:



Your ELOG account has been activated on host localhost:8080.

You can access it at http://localhost:8080/Demo/?unm=midas.

To subscribe to any logbook, click on 'Config' in that logbook.



I used following config:

[global]
Port = 8080
Password file = passwd
SMTP host = xxx
Self register = 3
Admin user = stefan
 
[Demo]
Attributes = Type, Subject, Author


So something in your config file must be different. Can you find out what it is?

/Stefan
  67471   Wed Apr 3 15:09:09 2013 Reply Stefan Rittstefan.ritt@psi.chQuestionWindows2.9.2-2456Re: Calculate with dates

UlfO wrote:

Hi,

Is it possbile to compare dates in E-log?

And based on that calculation have conditonal formats on certain attributes.

We have a need to monitor a date attribute named "Preferred finished date" on records placed in E-log.

And if SYSDATE is greater than the "Preferred finished date" we want to mark certain attibutes with a color.

Regards
/UlfO

 

This is a good idea, but not implemented. I will put this on the wishlist.

/Stefan 

Goto page Previous  1, 2, 3 ... 275, 276, 277 ... 806, 807, 808   Next  
ELOG V3.1.5-3fb85fa6